Spotlight
Home
Faculty Profiles
Student Homepages
IITR Home
Singh S.P.
Singh, Surendra P Professor spsptfpt[at]iitr.ac.in +919457296296
Areas of Interest
  • Paper Properties, Printability, Chemical Process Engg. , Paper Properties, Printability, Chemical Process Engg.
Educational Details
DegreeSubjectUniversityYear
B.E.Chemical Engg.University of Roorkee1974
M.E.Chemical Engg.University of Roorkee1976
Ph.D.Paper TechnologyUniversity of Roorkee/ STFI, Stockholm1991
Memberships
  • Indian Pulp & Paper Technical Association (IPPTA), Life Member
  • Technical Association of Pulp & Paper Industry (TAPPI), Active Member
  • AIChE, Member
PHDs Supervised
TopicScholar NameStatus of PHDRegistration Year
Bioethanol Production from Biomass by using ThermophilesSachin KumarA1
Simulation and Analysis of QOS in Wireless NetworksKumar ManojA1
Evaluation of Recycling Potential of Paper Making FibersMayank GargA1
Studies on fiber loading by in-situ precipitationPradeep KumarO1
Alternative recovery of energy and chemicals fro black liquorSurendra Pratap SinghO1
Nanofibrillation of cellulose fiberArvind KumarO1
Pressure Swing AdsorptionSwapnil DivekarO1
Refereed Journal Papers

1. Verma, P., Bhardwaj, N. K., and Singh, S. P., (2015) “Selective hydrolysis of amorphous cellulosic fines for improvement in drainage of recycled pulp based on ratios of cellulase components”, Journal of Industrial and Engineering Chemistry 22, pp. 229–239
2. Kumar, S., Dheeran, P., Singh, S. P., Mishra, I. M., and Adhikari, D. K., (2015)  “Kinetic studies of two-stage sulphuric acid hydrolysis of sugarcane bagasse”,  Renewable Energy, 83, pp. 850-858
3. Kumar, S., Dheeran, P, Singh, S. P., Mishra, I. M., Adhikari, D. K., (2015) “Bioprocessing of bagasse hydrolysate for ethanol and xylitol production using thermotolerant yeast”, Bioprocess Biosyst Eng. 38(1), pp. 39-47
4. Kumar, Arvind, Singh, S. P., and Singh, A. K., (2014) “Preparation and characterization of cellulose nanofibers from bleached pulp using a mechanical treatment method”, TAPPI J., 13(5), pp. 25-31
5. Kumar, S., Dheeran, P., Singh, S. P., Mishra, I. M., and Adhikari, D. K., (2013) “Kinetic studies of ethanol fermentation using Kluyveromyces sp. IIPE453”,  J Chem Technol Biotechnol, Published online in Wiley Online Library: (wileyonlinelibrary.com)DOI 10.1002/jctb.4042 (31 January 2013). 88(10), pp. 1874
6. Verma, P., Bhardwaj, N. K., and Singh, S. P., (2013) “Improvement in pulp dewatering through cellulases”, IPPTA J., 25 (3) , pp. 105
7. Sinha, A. S. K., Singh, M., and Singh, S. P., (2012) ‘Acetic acid pulping and ECF bleaching of rice straw and Effect of acid concentration on pulp characteristics’, IPPTA J., 24 (2), pp. 151-157.
8. Kumar, P., Negi, Y. S., and Singh, S. P., (2011) "Filler loading in the lumen or/and cell wall of fibers - A literature review," BioResources, 6(3), pp. 3526-3546.
9. Kumar, S., Singh, S. P., Mishra, I. M. and Adhikari, D. K., (2011) “Continuous ethanol production by Kluyveromyces sp. IIPE453 immobilized on bagasse chips in packed bed reactor, Journal of Petroleum Technology and Alternative Fuels, Vol. 2(1), (January 2011), 1-6, Available online at http://www.academicjournals.org/JPTAF
10. Kumar, P., Negi, Y. S. and Singh, S. P., (2011) “Offset printing behavior of bagasse and hardwood paper sheets loaded by in-situ precipitation,” BioResources, 6(1), pp. 207-218
11. Weley, S., Kumar, P. and Singh, S. P., (2010) “Pre-bleaching of mixed hardwood pulp with sulphuric acid”, J Indian Acad Wood Sci, 7(1–2), pp. 30–35
12. Kumar, S., Singh, S. P., Mishra, I. M. and  Adhikari, D. K., (2010) “Feasibility of ethanol production with enhanced sugar concentration in bagasse hydrolysate at high temperature using Kluyveromyces sp. IIPE453”, Biofuels 1(5), pp. 697-704
13. Kumar, Sachin, Singh, S. P., Mishra, I. M., and Adhikari, D. K., (2010) “Bioethanol production from lignocellulosic biomass”, IPPTA J., 22(3), pp. 143-150.
14. Sinha, A. S. K., Singh, M. and Singh, S. P., (2010) “Study on use of non-magnetic fraction of pulverized coal fly-ash as filler in specialty paper manufacturing”, IPPTA J., 22(2), pp. 117-120.
15. Kumar, P., Gautam, S. K., Kumar, V. and Singh, S. P., (2009) “Enhancement of optical properties of bagasse pulp by in-situ filler precipitation”, BioResources 4(4), pp. 1635-1646.
16. Kumar, Sachin, Singh, S. P., Mishra, I. M., and Adhikari, D. K., (2009) “Ethanol and xylitol production from glucose and xylose at high temperature by Kluyveromyces sp. IIPE453”, J Ind Microbiol Biotechnol, Published online: 19 September 2009.
17. Kumar, Sachin, Singh, S. P., Mishra, I. M., and Adhikari, D. K., (2009) “Recent advances in production of bioethanol from lignocellulosic biomass”, Chem. Eng. Technol., 32(4), pp. 517-526.
18. Kumar Manoj, Sharma,S. C.,  Parmanand, and Singh, S. P.,  (2009) “Scheduler Based QoS Analysis in MANET For DSR Protocol” , International Journal of Recent Trend in Engineering (ComputerScience), Academy Publisher, ACEEE, Finland, 2009, Vol.1 (2), Pp: 100-102
19. Verma, A. K., Ray, A. K., Singh, S. P., Banerjee, D., and Schabel, S., (2009) “A review of recent advances in the use of thermography in pulp and paper industry”, IPPTA Journal, 21(2), pp. 55-58.
20. Singh, S. P., (2008) “Printability of Paper”, IPPTA Journal, 20(4), pp. 79-87.
21. Kumar, Pradeep, Gautam, S. K., Singh, S. P. and Singh, I. J., (2008) “An experience with application of laboratory results to optimize AKD sizing parameters on a paper machine”, IPPTA Journal, 20(3), pp. 93-97.
22. Yadav, S. K., Singh, S. P. and Prasad, K. D., (2008) “Effect of increased proportion of ultra-fine ground calcium carbonate in coating pigments on surface, optical, and printing properties”, IPPTA Journal, 20(2), pp. 95-99.
23. Garg, M. Gautam, A. K. and Singh, S. P., (2008) “Wheat straw pulp as reinforcing aid for recycled softwood pulp”, IPPTA Journal, 20(2), pp. 113-117.
24. Singh, S. P., (2008) “A comparison of different methods of paper surface smoothness evaluation”, BioResources 3(2), pp. 503-516.
25. Garg, M. Gautam, A. K. and Singh, S. P., (2008) “Recycling potential of Saccharum Munja pulp”, Cellulose Chemistry & Technology 41(7-8), (2007), 473-481. Print appeared in Aug. 2008.
26. Chauhan, V. S.,  Singh, S. P. and Bajpai, P. K.,  (2007) “Fiber loading of hardwood pulp  by in-situ precipitation of aluminosilicat”e, BioResources 2(4), pp. 560-571.
27. Thomas, R., Singh, S. P. and Subrahmaniam, S. V., (2007) “A study on oxygen delignification of Melocanna baccifera (muli bamboo) kraft pulp”, BioResources 2(3), 430-441 (Aug. 2007).
28. Chauhan,V. S.,  Singh, S. P. and Bajpai, P. K.,  (2007) “Lumen loading of bleached pulps by in-situ precipitation of filler”, IPPTA Journal, vol. 19, No. 3, pp. 139-143
29.  Singh, S. P., (2007) “Relationship of z-tensile strength with in-plane strength properties of paper”, Indian Journal of Chemical Technology, vol. 14, pp. 317-320
30. Singh, S. P., (2007) Operator sensitivity in testing oil absorbency of paper, IPPTA Journal, vol 19, No. 2, pp. 135-138
31. Yadav, S., Singh, S. P., and Prasad, K. D., (2007) ”Kraft pulp from acacia mearnsii grown in southern India”, IPPTA J., vol 19, No. 1, pp. 67-71
32. Garg, M. and Singh, S. P., (2006) “Reasons of strength loss in recycled pulp”, APPITA Journal, Vol 59, No 4, PP. 274-
33. Singh, S. P. and Garg, M., (2005) “On the use of ink transfer parameters for characterization of printing papers”, APPITA Journal, Vol 58, No 4, pp. 277-
34. Garg, M., Kumar, P. and Singh, S. P., (2005) “Comparison of deinking behaviour of glazed newsprint with ONP”,  IPPTA Journal, No,3, pp. 39-
35. Garg, M. and Singh, S. P., (2004) “Response of bagasse and wheat straw recycled pulps to refining”, TAPPI JOURNAL, Vol. 3: No. 10, pp. 11-
36. Garg, M. and Singh, S. P., (2004) “Recycling potential of bagasse and wheat straw pulps”, TAPPI JOURNAL, Vol. 3: No. 9, pp. 25-