Spotlight
Faculty Profiles
Student Homepages
Facilities
IITR Home
Forms
Prospective Faculty
Time Table
Publications

2001

  1. R.Goel, A Sil and H R Anand, “Preparation and electrical characteristics of Al doped ZnO-Bi2O3-SiO2 varistors,” Transactions of the Materials Research Society of  Japan 26, (2001).
  2. Archana Mangla & Anjan Sil, “Transport characteristics of 0.3 KCl: 0.7 ZrO2 solid electrolyte,” Indian journal of Pure and Applied Physics, 39, (2001) , pp.267–270.
  3. R. Goel, A.Sil, S.R. Prabhakar, “Effect of SiO2 addition to ZnO–Bi2O3 based varistors,” Proc. National Seminar on Advances in Materials & Processing, 44, (2001), pp. 222–228.

2002

  1. Archana Gupta & Anjan Sil, “Preparation, characterization and ionic conductivity measurements of (1–x) KCl: x ZrO2 solid electrolyte system,” Indian Journal of  Engineering& Materials Sciences, 9, (2002), pp. 65–68.
  2. R. Tyagi, S. K. Nath, and S. Ray, “Effect of martensite content on friction and oxidative wear behavior of 0.42 Pct carbon dual-phase steel,” Metallurgical and Materials Transactions A, 33,(2002), pp. 3479–3488.
  3. H. Singh, D. Puri, and S. Prakash, “Studies of plasma spray coatings on a Fe-base superalloy, their structure and high temperature oxidation behaviour,” Anti-Corrosion Methods and Materials, 52, (2002), pp. 18–19.

2003

  1. R. Tyagi, S. K. Nath, and S. Ray, “Modelling of dry sliding oxidation-modified wear in two phase materials,” Wear, 255,( 2003), pp. 327–332.

2004

  1. Archana Gupta, Anjan Sil and N. K. Verma, “Preparation and characterization of mixed halide systems as solid electrolyte base,” Indian Journal of Engineering & Materials Sciences, 11, (2004), pp.212-216.
  2. B. S. Sidhu, D. Puri, and S. Prakash, “Characterisations of plasma sprayed and laser remelted NiCrAlY bond coats and Ni3Al coatings on boiler tube steels,” Materials Science and Engineering  A, 368, (2004) pp. 149–158.

 

2005

  1. Archana Gupta and Anjan Sil, “Transport characteristics of ZrO2 dispersed mixed (BaCl2)1-x - (KCl)x solid electrolytes,” Materials Research Bulletin, 40,(2005), pp.67-77.
  2. Yogesh Sharma, Anjan Sil and K.L.Yadav, “Structural and dielectric properties of MgO doped 0.8PMN-0.2PT solid solution,”   Indian Journal of  Engineering & Materials Sciences, 12, (2005),  pp.317 – 320
  3. S. Prakash, D. Puri, and H. Singh, “Hot Corrosion Behaviour of Plasma Sprayed Coatings on a Ni-based Superalloy in Na 2 SO 4 – 60 % V 2 O 5 Environment,” The Iron and Steel Institute of  Japan International, 45, (2005), pp. 886–895.
  4. B. S. Sidhu, D. Puri, and S. Prakash, “Mechanical and metallurgical properties of plasma sprayed and laser remelted Ni-20Cr and Stellite-6 coatings,” Journal of Materials Processing Technology, 159,(2005), pp. 347–355.
  5. H. Singh, D. Puri, and S. Prakash, “Some studies on hot corrosion performance of plasma sprayed coatings on a Fe-based superalloy,” Surface and Coatings Technology, 192, (2005), pp. 27–38.
  6. B. B. Panigrahi, V. V. Dabhade, and M. M. Godkhindi, “Thermal expansion behaviour of nanocrystalline titanium powder compacts,” Materials Letters, 59, (2005), pp. 2539–2541.

 

2006

  1. Kuntal Maiti and Anjan Sil, “Preparation of rare earth oxide doped alumina ceramics and their hardness,fracture toughness determinations,” Indian Journal of  Engineering & Materials Sciences, 13, (2006), pp.443-450.
  2. Misra, A., Tyagi, P.K., Yadav, B.S., Rai, P., Misra, D.S., Pancholi, V., Samajdar, I.D, “ Hexagonal diamond synthesis on h-GaN strained films”, Applied Physics Letters,89,(2006),pp. 425-435.
  3. T. S. Sidhu, S. Prakash, R. D. Agrawal, S. Kamal, R. Jayaganthan, and S. Prakash, “High temperature cyclic oxidation and hot corrosion behaviours of superalloys at 900A degrees C,” Thin Solid Films, 33, (2006) , pp. 95–105.
  4. H. Singh, S. Prakash, D. Puri, and D. M. Phase, “Cyclic Oxidation Behavior of Some Plasma-Sprayed Coatings in Na2SO4-60%V2O5 Environment,” Journal of Materials Engineering  and Performance, 15, (2006) , pp. 729–741.

2007

  1. Anjan Sil and Pankaj Kumar Verma, “Synthesis of nanosized AlN powder using novel nitridation route,” Indian Journal of Engineering & Materials Sciences,14, (2007), pp.309-312.
  2. R. Edwin Raj and B.S.S. Daniel, “Aluminum Melt Foam Processing for Light Weight Structures,” Materials and Manufacturing Processes, 22, (2007), pp. 525-530.
  3. U. Prakash, P. Prasadachary, T. Raghu, M. Sudhakar Rao and T. Raghu, “Effect of foaming characteristics of Al-based foams processed through P/M route”, Indian Institute of Metals, 60, (2007), 531.
  4. U. Prakash, N. Pravathavarthini, and R.K. Dayal, Intermetallics, “Effect of composition on hydrogen permeation in Fe-Al alloys”, Intermetallics 15, (2007), pp. 17-19.
  5. Pancholi, V., Kashyap, B.P, “Effect of layered microstructure on superplastic forming property of AA8090 Al-Li alloy”, Journal of Materials Processing Technology, 186,

(2007), pp. 214-220.

  1. Pancholi, V., Mallick, D., AppaRao, Ch., Samajdar, I., Chakrabarti, O.P., Maiti, H.S., Majumdar, R., “Microstructural characterization using orientation imaging microscopy of cellular Si/SiC ceramics synthesized by replication of Indian dicotyledonous plants”, Journal of the European Ceramic Society, 27, (2007). pp. 367-376.
  2. B. S. Sidhu, H. Singh, D. Puri, and S. Prakash, “Wear and oxidation behaviour of shrouded plasma sprayed fly ash coatings,” Tribology International,40,(2007), pp. 800–808.
  3. H. Singh, S. Prakash, and D. Puri, “Some observations on the high temperature oxidation behaviour of plasma sprayed Ni3Al coatings,” Materials Science and Engineering A, 444,(2007), pp. 242–250.
  4. H. Singh, D. Puri, S. Prakash, and T. K. Ghosh, “Hot corrosion of a plasma sprayed Ni3Al coating on a Ni-base superalloy,” Materials and Corrosion, 58, (2007) , pp. 857–866.
  5. H. Singh, D. Puri, S. Prakash, and R. Maiti, “Characterization of oxide scales to evaluate high temperature oxidation behavior of Ni-20Cr coated superalloys,” Materials Science and Engineering A, 464, (2007) , pp. 110–116.
  6. H. Singh, B. S. Sidhu, D. Puri, and S. Prakash, “Use of plasma spray technology for deposition of high temperature oxidation/corrosion resistant coatings - A review,” Materials and Corrosion, 58, (2007) , pp. 92–102.

2008

  1. Kushwaha, M.K.; Sil, Anjan; Ray, S, “Carbon nanotube / nanofiber embedded nanoporous anodized aluminium oxide surface and its tribological properties,” Journal of Nanoscience and Nanotechnology, 8 (2008), pp. 4152-4158.
  2. R. Edwin Raj, B.S.S. Daniel, “Manufacturing challenges in obtaining tailor-made closed-cell structures in metallic foams”, International Journal for Advanced Manufacturing Technology, 38, (2008), pp. 605-612.
  3. R. Edwin Raj, B.S.S. Daniel, “Structural property correlation with process parameters in the manufacture of closed-cell aluminum foam”, Journal of Manufacturing Engineering, 3, (2008), pp .67-72.
  4. R. Edwin Raj, B.S.S. Daniel, “Prediction of compressive properties of closed-cell aluminum foam using artificial neural network”, Computational Materials Science, 43, (2008), pp.767-773.
  5. U. Prakash and D.V.V., “Effect of Heat Treatment on structure and properties of P/M EIP 698P superalloy processed by Hot Isostatic Pressing”, Satyanarayana, Transactions of Powder Metallurgy Association of India, 34, (2008), pp. 28- 39
  6. Pancholi, V., Krishnan, M., Samajdar, I.S., Yadav, V., Ballal, N.B., “Self-accommodation in the bainitic microstructure of ultra-high-strength steel”,Acta Materialia, 56, (2008),pp. 2037-2050.     
  7. S. Das, S. B. Singh, O. N. Mohanty and H. K. D. H. Bhadeshia, “Understanding the complexities of bake hardening”, Materials Science and Technology, 24, (2008), pp. 107 – 111
  8. S. Das, S. B. Singh, O. N. Mohanty and H. K. D. H. Bhadeshia, “Understanding the complexities of bake hardening”, Materials Science and Technology,  24, (2008), pp. 107 – 111

2009

  1. Archana Gupta, Anjan Sil, N K Verma, “ Preparation, characterization and ionic conductivity studies of  ZrO2 dispersed mixed halide matrix (KCl)0.9 -(NaCl)0.1,” Journal of Physics and Chemistry of Solids, 70, (2009), pp. 340-343.
  2. K M Knowles, M E Vickers, Anjan Sil, Y-H Han and P Jaffrenou, “X-ray powder diffraction and electron diffraction studies of the thortveitite-related L phase, (Zn,Mn)2V2O7,” Acta Crystallographica B ,65, (2009) , pp 160-166.
  3. Priti Singh, Anjan Sil, Mala Nath and Subrata Ray, “Preparation and characterization of Li[Mn2-xFex]O4 (x = 0.0-0.6) spinel nanoparticles as cathode materials for lithium ion battery,” Advanced Materials Research, 67, (2009) , pp 233-238.
  4. Kuldeep Rana, Anjan Sil and S Ray, “Synthesis and characterization of carbon nanotubes by using catalyst LiNi0.5Co0.5O2 on anodized alumina substrate,” Advanced Materials Research, 67, (2009) , pp 197-202.
  5. Gurpreet Singh, Amrish Panwar, Anjan Sil and Sudipto Ghosh, “Synthesis and characterization of LiMn2O4 nanoparticles using citric acid as chelating agent,” Advanced Materials Research, 67, (2009) , pp 227-232.
  6. Gurpreet Singh, Anjan Sil and Sudipto Ghosh, “Structural, thermal and morphological studies of magnesium substituted-lithium manganese oxide spinels,” Physica B, 404, (2009), pp. 3807-3813. 
  7. Gurpreet Singh, S. L. Gupta, R. Prasad, S. Auluck, Rajeev Gupta and Anjan Sil, “Suppression of Jahn-Teller distortion by chromium and magnesium doping in spinel LiMn2O4: A first-principles study using GGA and GGA+U,” Journal of Physics and Chemistry of Solids, 70, (2009) , pp.1200-1206.
  8. Kuldeep Rana, Anjan Sil and S. Ray, “Synthesis of ribbon type carbon nanostructure using LiFePO4 catalyst and their electrochemical performance,” Materials Research bulletin, 44, (2009), pp. 2155-2159. 
  9. Raja Ram Prasad, B.S.S. Daniel, “Cryoginically synthesized mechanically alloyed Calcia stabilized Zirconia”,Advanced Materials Research, 67, (2009), pp. 271-276.
  10. R. Edwin Raj, B.S.S. Daniel, “Structural and compressive property correlation of closed-cell aluminum foam”, Journal of Alloys and Compounds, 467, (2009), pp.550-556.
  11. R. Edwin Raj and B.S.S. Daniel, “Microstructural influence in closed cell Aluminum foam for structural application”, International Journal of Microstructure and Materials properties, 4, (2009), pp. 476-486.
  12. R. Edwin Raj, Venkitanarayanan Parameswaran and B.S.S. Daniel, “Comparison of quasi-static and dynamic compression behavior of closed-cell aluminum foam”, Materials Science and Engineering: A, 526, (2009), pp. 11-15.
  13. Padap, A.K., Chaudhari, G.P., Nath, S.K., Pancholi, V., “Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties”, Materials Science and Engineering A, 527, (2009), pp.110-117.
  14. Chaudhari, G.P., Acoff, V., “Cold roll bonding of multi-layered bi-metal laminate composites” , Composites Science and Technology, 69,(2009), pp.1667-1675.
  15. V.V.S. Prasad,  Y. Satish Reddy, U. Prakash and R.G. Baligidad, “Recycling of  fine copper scrap into copper chromium alloys”, Copper Topics, 39, (2009), pp. 6-17.
  16. V.V.S. Prasad, M. Sankar, Y. Satish Reddy, U. Prakash and R.G. Baligidad, “Thermo-mechanical processing of Cu-Cr alloys prepared by using electro slag crucible melting”, Transactions of Indian Institute of Metals, 62, (2009), pp.65-75.
  17. Padap, A.K., Chaudhari, G.P., Nath, S.K., Pancholi, V., “Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties”. Materials Science and Engineering A, 527, (2009), pp. 110-117.
  18. Padap, A.K., Chaudhari, G.P., Nath, S.K., Pancholi, V., “EBSD analysis of warm multiaxially forged mild steel”, Materials Science and Technology Conference and Exhibition MS and T'09, 2, (2009), pp. 1008-1018.
  19. S. Das, I. Timokhina, S. B. Sing, E. Pereloma and O. N. Mohanty, “Kinetics of bake hardening in delta trip steel”, organized by Indian Institute of Technology Kharagpur in 2009
  20. M. Bhardwaj, “Enhancement of uncoupled nonlinear equations method for determining kinetic parameters in case of hydrogen evolution reaction after dropping two assumptions,” Int. J. Hydrogen Energy, 34, (2009), pp. 1655–1663.
  21. V. V. Dabhade, R. M. R. Tallapragada, and M. K. Trivedi, “Effect of external energy on atomic, crystalline and powder characteristics of antimony and bismuth powders,” Bulletin of Materials Science,32,( 2009), pp. 471–479.
  22. S. Bansal, S. K. Nath, P. K. Ghosh, and S. Ray, “Stretched zone width and blunting line equation for determination of initiation fracture toughness in low carbon highly ductile steels,” International Journal of Fracture, 159, (2009), pp. 43–50.
  23. H. M. Nanjunda Swamy, S. K. Nath, and S. Ray, “Tensile and fracture properties of cast and forged composite synthesized by addition of Al-Si alloy to magnesium,” Metallurgical and Materials Transactions A, 40, (2009), pp. 3284–3293.
  24. S. K. Nath, P. K. Ghosh, and S. Ray, “Influence of Geometrical Variables on Initiation Fracture Toughness ( J IC ) of Low Carbon High Manganese SA 333 Gr . 6 Steel”, The Iron and Steel Institute of Japnan  International, 49, (2009), pp. 1253–1258.
  25. A. K. Padap, G. P. Chaudhari, S. K. Nath, and V. Pancholi, “Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties,” Materials Science and Engineering A, 527, (2009), pp. 110–117.
  26. A. W. Tesfay, S. K. Nath, and S. Ray, “Effect of transfer layer on dry sliding wear behaviour of cast Al-based composites synthesized by addition of TiO2 and MoO3,” Wear, 266, (2009), pp. 1082–1090.

2010

  1. K. Devakumaran and P. K. Ghosh, “Thermal Characteristics of Weld and HAZ during Pulse Current Gas Metal Arc Weld”, Materials Manufacturing and Processsing, 25, (2010), pp. 616–630.
  2. Priti Singh, Anjan Sil, Mala Nath and Subrata Ray, “Preparation and characterization of lithium manganese oxide cubic spinel Li1.03Mn1.97O4 doped with Mg and Fe,” Physica B, 405, (2010), pp. 649-654. 
  3. Gurpreet Singh, Amrish Panwar, Anjan Sil and Sudipto Ghosh, “Synthesis and characterization of citric acid assisted Cr-doped lithium manganese oxide spinel,” Ceramics Silikaty, 53, (2009), pp. 260-267. 
  4. Gurpreet Singh, Anjan Sil, Sudipto Ghosh and Amrish Panwar, “Effect of citric acid content on synthesis of LiNi1/3Mn1/3Co1/3O2 and its electrochemical characteristics, Ceramics International, 36, (2010), pp. 1831-1836.
  5. Kuldeep Rana, Anjan Sil and S.Ray, “Modification of the structure of multi-walled carbon nanotubes by choice of catalyst and their electro-chemical behaviour,” Materials Chemistry and Physics, 120, (2010), pp. 484-489.
  6.  Priti Singh, Anjan Sil, Mala Nath and Subrata Ray, "Synthesis and characterization of Li[Mn2-xMgx]O4 (x = 0.0-0.3) prepared by sol-gel synthesis," Ceramics - Silikáty,  54 , (2010), pp. 38-46.
  7. Priti Singh, Anjan Sil, Mala Nath, and S. Ray, “Phase stability and charge capacity of cubic spinel in Li1+δMn2-δO4 and consequence of magnesium doping,” Journal of The Electrochemical Society, 157, (2010), pp. A259-A266.
  8. Kuntal Maiti and Anjan Sil, “Relationship between fracture toughness characteristics and morphology of sintered Al2O3 ceramics,” Ceramics International, 36, (2010). pp. 2337-2344.
  9. Kuntal Maiti and Anjan Sil, “Relationship of the R-curve with the microstructure of alumina ceramics,” Journal of Ceramics Processing Research, 11, (2010), pp. 678-684.
  10. D. Shivalingappa, B.S.S. Daniel, S. Ray, Scripta Materialia, “Dissolution of Aluminium base composite in Magnesium to inherit the reinforced phases in cast Magnesium base Composites”, Materials Science and Engineering, A 541, (2012), pp. 172-180.
  11. Nath, S.K., Chaudhari, G.P., Singla, M., “Effect of thermomechanical treatment on the microstructure and mechanical properties of an IF steel”, Journal of Materials Engineering and Performance, 19, (2010), pp.1325-1329.
  12. Padap, A.K., Chaudhari, G.P., Pancholi, V., Nath, S.K., “Warm multiaxial forging of AISI 1016 steel, Materials and Design, 31, (2010) 3816-3824.
  13. Padap, A.K., Chaudhari, G.P., Nath, S.K., “ Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging”, Journal of Materials Science, 45, (2010) 4837-4845.
  14. Chaudhari, G.P., Acoff, V.L., “Titanium aluminide sheets made using roll bonding and reaction annealing”, Intermetallics, 18, (2010), 472-478.
  15. Padap, A.K., Chaudhari, G.P., Pancholi, V., Nath, S.K., “Warm multiaxial forging of AISI 1016 steel”, Materials and Design, 31, (2010), pp. 3816-3824. 
  16. Panigrahi, S.K., Jayaganthan, R., Pancholi, V., Gupta, M., “A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy”, Materials Chemistry and Physics, 122, (2010), pp. 188-193. 
  17. Nath, G. P. CHAUDHARI, and M. SINGLA, “Effect of thermomechanical treatment on the microstructure and mechanical properties of an IF steel,” Journalof Materials Engineering and Performance, 19, (2010), pp. 1325–1329.
  18. H. N. Shah, R. Jayaganthan, and D. Kaur, “Influence of silicon content on the microstructure and hardness of CrN coatings deposited by reactive magnetron sputtering,” Materials Chemistry and Physics, 121, (2010), pp. 567–571.
  19. J. J. Kim et al., “Electro magnetic interference shielding characteristic of silver coated copper powder,” Metals and Materials International, 16, (2010), pp. 469–475.
  20. V. Chawla, R. Chandra, and R. Jayaganthan, “Effect of phase transformation on structural , electrical and hydrophobic properties of nanocomposite Ti 1 − x Al x N films,” Journal of Alloys and Compounds,20, pp.47–53.
  21. V. Chawla, R. Jayaganthan, and R. Chandra, “A study of structural and mechanical properties of sputter deposited nanocomposite Ti-Si-N thin films,” Surface and Coatings Technology, 204, (2010), pp. 1582–1589.
  22. V. Chawla, R. Jayaganthan, and R. Chandra, “Microstructural and mechanical properties of sputter deposited TiN/SiNx multilayer thin films,” Material Chemistry and  Physics, 122, (2010), pp. 424–430.
  23. R. Jayaganthan, H. G. Brokmeier, B. Schwebke, and S. K. Panigrahi, “Microstructure and texture evolution in cryorolled Al 7075 alloy,” Journal of Alloys and Compounds, 496, (2010), pp. 183–188.
  24. S. Kamal, R. Jayaganthan, and S. Prakash,“Mechanical and microstructural characteristics of detonation gun sprayed NiCrAlY + 0.4 wt% CeO2 coatings on superalloys,” Material Chemistry and  Physics, 122, (2010), pp. 262–268.
  25. R. A. Mahesh, R. Jayaganthan, and S. Prakash, “A study on the oxidation behavior of HVOF sprayed NiCrAlY-0.4 wt.% CeO2 coatings on superalloys at elevated temperature,” Material Chemistry and  Physics, 119, (2010), pp. 449–457.
  26. A. K. Padap, G. P. Chaudhari, and S. K. Nath, “Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging,” Journal of  Materials Science, 45, (2010), pp. 4837–4845.
  27. A. K. Padap, G. P. Chaudhari, V. Pancholi, and S. K. Nath, “Warm multiaxial forging of AISI 1016 steel,” Materials and Design, 31, (2010), pp. 3816–3824.
  28. S. K. Panigrahi, R. Jayaganthan, V. Pancholi, and M. Gupta, “A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy,” Material Chemistry and  Physics ,122, (2010), pp. 188–193.
  29. S. K. Panigrahi and R. Jayaganthan, “A study on the combined treatment of cryorolling, short-annealing, and aging for the development of ultrafine-grained Al 6063 alloy with enhanced strength and ductility,” Metallurgical and  Materials Transaction A ,41, , (2010), pp. 2675–2690.
  30. S. K. Panigrahi and R. Jayaganthan, “Effect of annealing on precipitation, microstructural stability and mechanical properties of cryorolled Al 6063 alloy,” Journal of Materials Science, 45, (2010), pp. 5624–5636.
  31. A. Rahman, V. Chawla, R. Jayaganthan, R. Chandra, and R. Ambardar, “Evaluation of high temperature oxidation behaviour of nanostructured Cr/Co-Al coatings,” Oxid. Met.,74, (2010),  pp. 341–358.
  32. M. R. Ramesh, S. Prakash, S. K. Nath, P. K. Sapra, and B. Venkataraman, “Solid particle erosion of HVOF sprayed WC-Co/NiCrFeSiB coatings,” Wear,  269 , (2010),  pp. 197–205.
  33. S. K. Rawal, A. K. Chawla, V. Chawla, R. Jayaganthan, and R. Chandra, “Effect of ambient gas on structural and optical properties of titanium oxynitride films,” Applied  Surface Science,256, (2010),  pp. 4129–4135.
  34. S. K. Rawal, A. K. Chawla, V. Chawla, R. Jayaganthan, and R. Chandra, “Structural, optical and hydrophobic properties of sputter deposited zirconium oxynitride films,” Materials Science and Engineering B,172, (2010),  pp. 259–266.
  35. H. N. Shah, V. Chawla, R. Jayaganthan, and D. Kaur, “Microstructural characterizations and hardness evaluation of d.c. reactive magnetron sputtered CrN thin films on stainless steel substrate,” Bulletin of Materials Science, 33, (2010),  pp. 103–110.
  36. H. N. Shah, R. Jayaganthan, D. Kaur, and R. Chandra, “Influence of sputtering parameters and nitrogen on the microstructure of chromium nitride thin films deposited on steel substrate by direct-current reactive magnetron sputtering,” Thin Solid Films, 518, (2010), pp. 5762–5768.
  37. B. P. Agrawal and P. K. Ghosh, “Thermal Modeling of Multipass Narrow Gap Pulse Current GMA Welding by Single Seam per Layer Deposition Technique Thermal Modeling of Multipass Narrow Gap Pulse Current GMA,” Materials and Manufacturing Processes, 25, (2010), pp.1251-1268.

2011

  1. Vinay Pratap Singh, Anjan Sil, and R Jayaganthan, “A study on sliding and erosive wear behavior of atmospheric plasma sprayed conventional and nanostructured alumina coatings,” Materials and Design, 32, (2011) , pp.584-591.
  2. Debajyoti Mohanty, Anjan Sil and Kuntal Maiti, “Development of input output relationships for self-healing Al2O3/SiC ceramic composites with Y2O3 additive using design of experiments,” Ceramics International, 37, (2011), pp. 1985-19192.
  3. Kuntal Maiti and Anjan Sil, “Microstructural relationship with fracture toughness of undoped and rare earths (Y, La) doped Al2O3-ZrO2 ceramic composites,” Ceramics International, 37, (2011) , pp.2411-2421.
  4. M. Jana, A. Sil and S. Ray, “Tailoring of surface melting of oxide based catalyst particles by doping to influence the growth of multi-walled carbon nano-structures.” Carbon, 49, (2011), pp. 5142 - 5149.
  5. R. Edwin Raj, B.S.S. Daniel, “Customization of closed-cell aluminium foam properties using design of experiments,” Material Science and Engineering A, 528, (2011), pp. 2067-2075.
  6. Sudhakar Panday, B.S.S. Daniel, P. Jeevanandam, “Magnetic properties of Nanocrystalline Co-Ni alloys synthesized by precursor,” Journal of Magnetism and Magnetic Materials, 323, (2011), pp. 2271-2280.
  7. B. V. Manoj Kumar, Wentao Zhai, Jung-Hye Eom, Young-Wook Kim and Chul B. Park, “Processing Highly Porous SiC Ceramics Using Poly (Ether-co-Octene) and Hollow Microsphere Templates,” Journal of Materials Science, 46, (2011) , pp.3664-3667.
  8. B. V. Manoj Kumar, Jung-Hye Eom, Young-Wook Kim, In-Hyuck Song, Hai-Doo Kim, “Effect of Aluminum Hydroxide Content on Porosity and Strength of Porous Mullite-Bonded Silicon Carbide Ceramics,” Journal of the Ceramic Society of Japan, 119 ,(2011), pp. 367-370.
  9. B. V. Manoj Kumar, Kwang-Young Lim, Young-Wook Kim, “Influence of Submicron SiC Particle Addition on Porosity and Flexural Strength of Porous Self-Bonded Silicon Carbide,” Metals and Materials International, 17, (2011), pp. 435-440.
  10. B. V. Manoj Kumar, Jung-Hye Eom, Young-Wook Kim, “Effect of filler addition on porosity and strength of polysiloxane-derived porous silicon carbide ceramics,” Journal of the Ceramic Society of Japan, 119, (2011), pp. 48-54.
  11. B. V. Manoj Kumar, Young-Wook Kim, Dae-Soon Lim, Won-Seon Seo, “Influence of Small Amount of Sintering Additives on Unlubricated Sliding Wear Properties of SiC Ceramics,” Ceramics International, 37, (2011), pp. 3599-3608.
  12. Jung-Hoo Shin, B. Venkata Manoj Kumar, Jae-Hee Kim and Seong-Hyeon Hong. “Tribological Poroperties of Si3N4/SiC Nano-Nano Composite Ceramics,” Journal of the American Ceramic Society, 94, (2011), pp. 3683-3685.
  13. G.P. Chaudhari, A.K. Padap, S. Behera, S.K. Nath, “Processing, microstructure and corrosion behaviour of multi-axially forged low carbon steels,” Corrosion Engineering Science and Technology, 46. (2011), pp. 392-399.
  14. L.R. Bhagavathi, G.P. Chaudhari, S.K. Nath, “Mechanical and corrosion behavior of plain low carbon dual-phase steels,” Materials and Design, 32, (2011), pp. 433-440.
  15. P. Das, R. Jayaganthan, T. Chowdhury, and I. V. Singh, “Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy,” Materials Science and Engineering A, 528, (2011), pp. 7124– 7132.
  16. R. Jindal, R. Jayaganthan, I. V. Singh, and R. Conradt, “Synthesis and characterization of clinopyroxene based glasses and glass-ceramics along diopside (CaMgSi2O6)- jadeite (NaAlSi2O6) join,” Ceramics International, 37, (2011), pp. 741–748.
  17. S. Kamal, R. Jayaganthan, and S. Prakash, “Hot corrosion studies of detonation-gun sprayed NiCrAlY + 0.4 wt.% CeO2 coated super alloys in molten salt environment,” J. Materials  Engineering and Performance,20, (2011), pp. 1068–1077.
  18. S. K. Panigrahi and R. Jayaganthan, “Development of ultrafine-grained Al 6063 alloy by cryo-rolling with the optimized initial heat treatment conditions,” Materials and Design, 32, (2011), pp. 2172–2180.
  19. S. K. Panigrahi and R. Jayaganthan, “Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryo-rolling,” Materials and Design, 32, (2011), pp. 3150– 3160.
  20. S. K. Panigrahi and R. Jayaganthan, “Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy,” Journal of Alloys and  Compounds, 509, (2011), pp. 9609–9616.
  21. S. K. Panigrahi and R. Jayaganthan, “Effect of annealing on thermal stability, precipitate evolution, and mechanical properties of cryo-rolled Al 7075 alloy,” Metall. Mater. Trans. A Phys. Metallurgical and Materials Science, 42, (2011), pp. 3208–3217.
  22. A. Rahman, R. Jayaganthan, R. Chandra, and R. Ambardar, “Microstructural characterization and cyclic hot corrosion behaviour of sputtered Co-Al nanostructured coatings on superalloy,” Oxidation of  Metals,76 ,(2011), pp.307–330.
  23. M. R. Ramesh, S. Prakash, S. K. Nath, P. K. Sapra, and N. Krishnamurthy, “Evaluation of thermocyclic oxidation behavior of HVOF-sprayed NiCrFeSiB coatings on boiler tube steels,” Journal of Thermal Spray Technology, 20, (2011), pp. 992–1000.
  24. S. K. Rawal, A. K. Chawla, V. Chawla, R. Jayaganthan, and R. Chandra, “Characterization of bi-phased Zr2ON2-ZrO2 coatings deposited by RF magnetron sputtering,” Thin Solid Films, 520, (2011), pp. 1589–1596.
  25. S. K. Rawal, A. K. Chawla, V. Chawla, R. Jayaganthan, and R. Chandra, “Structural and optical investigation of sputter deposited hydrophobic chromium oxynitride films,” Thin Solid Films, 519, (2011), pp. 7686–7693.
  26. S. K. Rawal, A. K. Chawla, R. Jayaganthan, and R. Chandra, “Optical and hydrophobic properties of co-sputtered chromium and titanium oxynitride films,” Applied Surface and Science,257, (2011) , pp.8755–8761. ,
  27. H. N. Shah, R. Jayaganthan, and D. Kaur, “Influence of reactive gas and temperature on structural properties of magnetron sputtered CrSiN coatings,” Applied Surface and Science, 257, (2011), pp. 5535–5543.
  28. H. N. Shah, R. Jayaganthan, and A. C. Pandey, “Nanoindentation study of magnetronsputtered CrN and CrSiN coatings,” Materials and Design, 32, (2011), pp. 2628–2634.
  29. V. P. Singh, A. Sil, and R. Jayaganthan, “Tribological behavior of plasma sprayed Cr2O3-3%TiO2 coatings,” Wear, 272, (2011), pp. 149–158.
  30. L. Thakur, N. Arora, R. Jayaganthan, and R. Sood, “An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings,” Appl. Surf. Sci. 258 (2011) 1225–1234.
  31. M. S. Goyat, S. Ray, and P. K. Ghosh, “Innovative application of ultrasonic mixing to produce homogeneously mixed nanoparticulate-epoxy composite of improved physical properties,” Applied Science and Manufacturing, 42,(2011) , pp.1421–1431.

2012

  1. K. Devakumaran, N. Rajasekaran, and P. K. Ghosh, “Process Characteristics of Inverter Type GMAW Power Source Under Static and Dynamic Operating Conditions Process Characteristics of Inverter Type GMAW Power Source Under Static and Dynamic Operating Conditions,” Materials and Manufacturing Processes, 27, (2012), pp. 1450–1456.
  2. H. N. Shah and R. Jayaganthan, “Influence of Al contents on the microstructure, mechanical, and wear properties of magnetron sputtered CrAlN coatings,” Journal of  Materials  Engineering and  Performance, 21, (2012), pp. 2002–2009.
  3. M. Jana, A. Sil and S. Ray, “Influence of melting of transition metal oxides on the morphology of carbon nanostructures”, Advanced Materials Research, 585, (2012), pp. 159-163.
  4. M. Jana, A. Sil and S. Ray, “Growth of carbon nanostructures in catalytic chemical vapour deposition method”. The Banaras Metallurgist, 17, (2012), pp.1-16.
  5. Vinay Pratap Singh, Anjan Sil, and R. Jayaganthan, “Tribological Behavior of Nanostructured Alumina Coatings”, Surface Engineering ,28 ,(2011), pp. 277-284.
  6. S S Ghosh, S Das, A Sil and P K Biswas, “Characterization of individual layers of an optical design based multilayered antireflection coating developed by sol-gel method,” Journal of Sol-Gel Science and  Technology, 64, (2012), pp. 534-542.
  7. Rajni Sharma, Anjan Sil and Subrata Ray, “Characterization of Plasticized PMMALiClO4 Solid Polymer Electrolytes,” Advanced Materials Research, 585 (2012), pp. 185-189.
  8. Rajeev Sehrawat and Anjan Sil, “Synthesis and characterization of LiFePO4-C/PANI composites for cathode material of lithium ion battery, “Advanced Materials Research, 585, (2012), pp. 240-244.
  9. Chandan Bhardwaj, B.S.S.Daniel, Davinder Kaur, “Highly tunable compositionally graded (1-x)Ba(Zr0.2Ti0.8)O3–x(Ba0.7Ca0.3)TiO3 multilayer with low temperature capacitance coefficients,” Materials Letters, 87, (2012), pp. 172–175.
  10. Sudhakar Panday, B.S.S. Daniel, P. Jeevanandam, Nanocrystalline Co82Ni18 Alloy: Synthesis and Magnetic Properties, Advanced Materials Research, 585, (2012), pp. 100- 104.
  11. D. Shivalingappa, B.S.S. Daniel and Subrata Ray, “Effect of reinforcing phase inherited from another composite on the mechanical properties of cast magnesium base composite”, Material Science and Engineering A, 541, (2012), pp. 172-180.
  12. Raja Ram Prasad, K.L. Yadav, B.S.S. Daniel, Conductivity measurement of calcia stabilized zirconia prepared by mechanical route, Advanced Materials Research, 585, (2012) , pp.245-249.
  13. Shejale K. Prakash, Harjeet Singh, Himanshu Panjiar, Sanjeev Manhas, B.S.S. Daniel, “Application of Graphene Oxide and TiO2 in the fabrication of Dye sensitized solar cells module by electrode modification”, Advanced Materials Research, 585, (2012), pp. 255- 259.
  14. Harjeet Singh, Shejale K. Prakash, Himanshu Panjiar, B.S.S. Daniel, “Synthesis of TiO2 film for Dye-sensitized solar cells”, Advanced Materials Research ,585 ,(2012), pp. 284-288.
  15. V.K. Jeenagar, Vivek Pancholi, B.S.S. Daniel, “The effect of aging on energy absorption capability of closed cell aluminium foam,” Advanced Materials Research, 585, (2012), pp. 327-331.
  16. H. Shivananda Nayaka, G.P. Chaudhari, B.S.S. Daniel, “Grain growth kinetics of accumulative roll bonded AZ61 alloy,” Advanced Materials Research ,585, (2012), pp. 387-391.
  17. S. Riyaz Ahmed, Ajai Agarwal, B.S.S. Daniel, “Correlation of Mechanical and Microstructural properties of SMAW welded Cr-Mo Boiler steels subjected to different post weld heat treatment soaking times,” Advanced Materials Research, 585 ,(2012) , pp.425- 429.
  18. Sudhakar Panday, P. Jeevanandham, B.S.S. Daniel, “Synthesis and magnetic properties of nanocrystalline Co-Ni alloys”, Materials Science Forum, 736, (2012), pp.229-240.
  19. A.K. Padap, G.P. Chaudhari, V. Pancholi, S.K. Nath, “Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel,” Journal of Materials Science, 47, (2012), pp. 7894-7900.
  20. P.P. Bhingole, G.P. Chaudhari, “Synergy of nano carbon black inoculation and high intensity ultrasonic processing in cast magnesium alloys,” Materials Science and Engineering A, 556, (2012), pp.954-961.
  21. H.J. Amarendra, G.P. Chaudhari, S.K. Nath, “Synergy of cavitation and slurry erosion in the slurry pot tester,” Wear 290-291 (2012) 25-31.
  22. B. Patel, G.P. Chaudhari, P.P. Bhingole, “Microstructural evolution in ultrasonicated AS41 magnesium alloy,” Materials Letters, 66, (2012), pp. 335-338.
  23. K. Joshi, H.J. Amarendra, G.P. Chaudhari, S.K. Nath, “Effect of deposition parameters & molybdenum percentage on Nickel- Molybdenum alloy coatings”, Advanced Materials Research, 585, (2012), pp.493-497.
  24. A. Selokar, D. B.Goel and U. Prakash, “A comparative study of cavitation erosive behavior of 23/8N Nitronic steel and 13/4 martensitic steel,” Advanced Materials Research, 583, (2012), pp. 554.
  25. S.K.Chaurasia, U. Prakash, K. Chandra and P. S. Misra, “Fe-P soft magnetic properties of iron for AC applications,” Advanced Materials Research, 583, (2012), pp. 289-301.
  26. S.K.Chaurasia, U. Prakash, K. Chandra and P. S. Misra, “Comparisons of Sintered Technology with Powder forging for Fe-P soft magnetic alloys,” Materials Science Forum, 210, (2012), pp. 297.
  27. S.K.Chaurasia, U. Prakash, K. Chandra and P. S. Misra, Development of P/M Fe-P soft magnetic alloys, Bulletin of Materials Science, 35 ,, pp.(2012) 191.
  28. V.K. Jeenager, V. Pancholi, B.S.S. Daniel, “The effect of aging on energy absorption capability of closed cell aluminum foam,” Advanced Materials Research, 585, (2012), pp. 327-331.
  29. K.N. Ramesh, S. Pradeep, V. Pancholi, “Multipass friction-stir processing and its effect on mechanical properties of aluminum alloy5086,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 43, (2012), pp. 4311-4319.
  30. A.K. Padap, G.P. Chaudhari, V. Pancholi, S.K. Nath, “Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel,” Journal of Materials Science 47, (2012), pp. 7894-7900.
  31. A.K. Singh, S.K. Nath, M. Bhardwaj, V. Pancholi, G.P. Chaudhari, “Microstructural studies on thermomechanically processed plain carbon dual phase steel,” TMS Annual Meeting, 2 (2012) , pp.659-665.
  32. M. Dikovits, C. Poletti, F. Warchomicka, G.P. Chaudhari, V. Pancholi, “Hot deformation study by processing maps of N containing microalloyed steel,” Characterization of Minerals, Metals, and Materials, TMS, Annual Meeting, (2012), pp. 503-510.
  33. S. Pradeep, S.K. Sharma, V. Pancholi, “Microstructural and mechanical characterization of friction stir processed 5086 aluminum alloy,” Materials Science Forum, 710, (2012), pp. 253-257.
  34. V. Pancholi, B.P. Kashyap, “Microstructural evolution during superplastic forming of Al-Li 8090 alloy,” Materials Science Forum, (2012), pp. 374-377.
  35. S. Pradeep, S.K. Sharma, V. Pancholi, “Influence of friction stir processing parameters on anisotropic behavior property of 5086-O aluminum alloy,” Materials Science Forum, 702, (2012), pp. 348-351.
  36. Suhrit Mula, S.K. Pabi, Carl C Koch, P. Padhi, S. Ghosh, “Workability and mechanical properties of ultrasonically cast Al–Al2O3 nanocomposites,” Materials Science and Engineering: A ,558, (2012), pp. 485-491.
  37. S. Mal, S. Nori, Suhrit Mula, J. Narayan, J. T. Prater, “Defect mediated reversible ferromagnetism in Co and Mn doped zinc oxide epitaxial films,” Journal of Applied  Physics,112, (2012) , pp.113-127.
  38. Suhrit Mula, S. Ghosh and S. K. Pabi, “Microstructural development and roomtemperature thermal stability of mechanically alloyed Al87Y10Ni3 nanostructure,” Advanced Science Letters, 16, (2012), pp. 362-367.
  39. Suhrit Mula, H. Bahmanpour, S. Mal, P C Kang, M. Atwater, W. Jian, R.O. Scattergood, C.C. Koch, “Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability,” Materials Science and Engineering: A, 539, (2012), pp. 330-336.
  40. P. Das, I. V. Singh, and R. Jayaganthan, “An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy,” Journal of Materials Engineering and performance, 21, (2012), pp. 1167–1181.
  41. S. Kumar, G. P. Chaudhari, S. K. Nath, and B. Basu, “Effect of Preheat Temperature on Weldability of Martensitic Stainless Steel,” Materials and Manufacturing Processing, 27, (2012), pp. 1382-1386.
  42. M. Mittal, S. Prakash, and S. K. Nath, “Recrystallization of Amorphous Phases via Post-Coating Heat-Treatment of Plasma-Sprayed Hydroxyapatite Coatings,” Mater. Manuf. Process. 27, (2012), pp. 1001–1006.
  43. P. Nageswara rao and R. Jayaganthan, “Effects of warm rolling and ageing after cryogenic rolling on mechanical properties and microstructure of Al 6061 alloy,” Mater. Des. 39, (2012), pp. 226–233.
  44. A. K. Padap, G. P. Chaudhari, V. Pancholi, and S. K. Nath, “Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel,” J. Mater. Sci. 47 (2012) 7894–7900.
  45. A. Rahman, V. Chawla, R. Jayaganthan, R. Chandra, R. Ambardar, and S. B. Mohamed, “Microstructural characterisations and high temperature oxidation studies of nanostructured Co-Al coatings deposited on superalloy,” Trans. Indian Inst. Met. 65, (2012), pp. 205–217.
  46. S. K. Rawal, A. K. Chawla, R. Jayaganthan, and R. Chandra, “Structural, Wettability and Optical Investigation of Titanium Oxynitride Coatings: Effect of Various Sputtering Parameters,” J. Mater. Sci. Technol, 28,(2012), pp. 512–523.
  47. V. P. Singh, A. Sil, and R. Jayaganthan, “Wear of Plasma Sprayed Conventional and Nanostructured Al2O3 and Cr2O3, Based Coatings,” Trans. Indian Inst. Met.,65, (2012), pp. 1–12.
  48. R. Walia, J. C. Pivin, Ravish Jain, R. Jayaganthan, Eckhard Pippel, Fouran Singh, and Ramesh Chandra, “Effect of swift heavy ion irradiation on sputter deposited SiO2/Co/Pt/SiO2 multilayers,” Nucl. Instruments Methods Phys. Res. Sect. B Beam Interact. with Mater. Atoms , (2012), pp. 123–130.
  49. R. Walia, J. C. Pivin, A. K. Chawla, R. Jayaganthan, Y. K. Gautam, and R. Chandra, “A comprehensive study of structural and magnetic properties of sputter deposited nickel–silica thin films,” Mater. Sci. Eng. B, 177, (2012), pp. 1073–1079.

2013

  1. Mark A. Atwater, Suhrit Mula, Ronald O. Scattergood, Carl C. Koch, “Thermal stability of nanocrystalline copper alloyed with antimony,” Metallurgical and Materials Transactions A,  44A, (2013), pp. 5611-5616.
  2. Chandan Bhardwaj, B.S.S.Daniel, Davinder Kaur, “Pulsed laser deposition and characterization of highly tunable (1-x)Ba(Zr0.2Ti0.8)O3– x(Ba0.7Ca0.3)TiO3 thin films grownon LaNiO3/Si substrate,” Journal of Physics and Chemistry of Solids, 74, (2013), pp. 94–100.
  3. P. K. Ghosh, S. Halder, M. S. Goyat, and G. Karthik, “Study on Thermal and Lap Shear Characteristics of Epoxy Adhesive Loaded with Metallic and Non- Metallic Particles Study on Thermal and Lap Shear Characteristics of Epoxy Adhesive Loaded with Metallic and Non-Metallic Particles,” The Journal of Adhesion, 89, (2013), pp. 55-75.
  4. Sujit Kumar Verma, B.S.S. Daniel, “Synthesis and characterization of shape memory Nano alloy Cu74Zn22Al4 (wt %) using high energy ball milling,” American International Journal of Research in Science, Technology, Engineering & Mathematics, 2 ,(2013), pp. 11- 22.
  5. S.K. Rajput, M. Dikovits, G.P. Chaudhari, C. Poletti, F. Warchomicka, V. Pancholi, S.K. Nath, “Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps,” Materials Science and Engineering A, 587 ,(2013) , pp.291-300.
  6. A. Selokar, D. B.Goel, U. Prakash and A. Chaurasia, “Erosion behavior of Fe-Alloys for underwater components of hydroelectric power plant,” Transactions of Indian Institute of Metals, 66, (2013), pp. 425.
  7. S. Pradeep, V. Pancholi, “Effect of microstructural inhomogeneity on superplastic behaviour of multipass friction stir processed aluminium alloy,” Materials Science and Engineering A ,561, (2013), pp. 78-87.
  8. D. Lahiri, V. Singh, G.R. Rodrigues, T. M. Haas Costa, M.R. Gallas, S.R. Bakshi, S. Seal, A. Agarwal, “Ultrahigh-pressure consolidation and deformation of tantalum carbide at ambient and high temperatures”, Acta Materialia , 61, (2013), pp. 4001- 4009.
  9. B. Boesl, D. Lahiri, S. Behdad, A. Agarwal, “Direct Observation of Carbon Nanotube Induced Strengthening in Aluminum Composite via In situ Tensile Tests”, Carbon, 69, (2013), pp. 79–85.
  10. D. Lahiri, A. Hadjikhani, C. Zhang, T. Xing, L. Hua Li, Y. Chen, A. Agarwal, “Boron nitride nanotubes reinforced aluminum composites prepared by spark plasma sintering: Microstructure, mechanical properties and deformation behaviour”, Materials Science and Engineering: A, 574, (2013) , pp.149-156.
  11. D. Lahiri, P.K. Gill, S. Scudino, C. Zhang, V. Singh, J. Karthikeyan, N. Munroe, S. Seal, A. Agarwal, “Cold Sprayed Aluminum Based Glassy Coating: Synthesis, Wear and Corrosion Properties”, Surfaces and Coating Technology,,  232 (2013), pp. 33- 40.
  12. S. Das, D. Lahiri, A. Agarwal, W. Choi, “Measurements of the adhesion energy of graphene to metallic substrates”, Carbon ,59, (2013), pp. 121-129.
  13. A. Nieto, D. Lahiri, A. Agarwal, “Nano Dynamic Mechanical Behavior of Graphene NanoPlatelets Reinforced Tantalum Carbide”, Scripta Materialia, 69 (2013), pp. 678-681.
  14. A. Nieto, D. Lahiri, A. Agarwal, “Graphene NanoPlatelet Reinforced Tantalum Carbide Consolidated by Spark Plasma Sintering: Microstructure and Mechanical Properties” Materials Science and Engineering A, 582, (2013) , pp.338-346.
  15. D. Lahiri, E. Khalegi, S.R. Bakshi, W. Li, E.A. Olevsky, A. Agarwal, “Graphene Induced Strengthening in Spark Plasma Sintered Tantalum Carbide-Nanotube Composite”, Scripta Materialia ,68, (2013), pp. 285-288.
  16. C. Zhang, U. Chaudhary, D. Lahiri, A. Godavarty, A. Agarwal, “Photo-catalytic Activity of Spark Plasma Sintered TiO2-Graphene Nanoplatelet Composite System”, Scripta Materialia, 68 (2013) 719-722.
  17. Gupta, G. Tripathi, D. Lahiri, K. Balani, “Compression Molding of UHMWPE-HAAl2O3-CNT Hybrid Composites for Hard Tissue Replacement”, Journal of Materials Science & Technology, 29,( 2013), pp. 514-522.
  18. V. Kumar, A. Gupta, D. Lahiri, K. Balani, “Nanomechanical Behavior Eliciting Serrated Yielding in Thermomechanically Processed Novel Mg-9Li-7Al-1Sn and Mg- 9Li-5Al-3Sn-1Zn Alloys”, Accepten for Publication in Journal of Physics D: Applied Physics, 46, (2013), pp. 145304.
  19. K.K. Jha, N. Suksawang, D. Lahiri, A. Agarwal, “Evaluating initial unloading stiffness from elastic work-of-indentation measured in a nanoindentation experiment”, Journal of Materials Research 28 (2013) , pp.789-797.
  20. Development of multiphase microstructure with bainite, martensite and retained austenite in a Co-containing steel through Quenching and Partitioning (Q&P) treatment, S. Samanta, S. Das, D. Chakrabarti, I. Samajdar, S.B. Singh, A. Haldar; Metallurgical and Materials Transactions A, 44, (2013), pp. 5653- 5664.
  21. G. Jha, S. Das, S. Sinha, A. Lodh and A. Haldar, @ Design and development of precipitate strengthened advanced high strength steel for automotive application”, Materials Science and Engineering A, 561, (2013), pp. 394 – 402.
  22.   Zheng Yan† , Lulu Ma† , Yu Zhu† , Indranil Lahiri, Myung Gwan Hahm, Zheng Liu, Shubin Yang, Changsheng Xiang, Wei Lu, Zhiwei Peng, Zhengzong Sun, Carter Kittrell, Jun Lou, Wonbong Choi, Pulickel M. Ajayan, James M. Tour, “Three dimensional metal-graphene-nanotube multifunctional hybrid materials”,  ACS Nano, 7, (2013), pp. 58-64.
  23.  Indranil Lahiri, Wonbong Choi, “Carbon Nanostructures in Lithium Ion Batteries”, Solid State and Materials Sciences, 38, (2013), pp.128-166.
  24.  M. Mittal, S. K. Nath, and S. Prakash, “Improvement in mechanical properties of plasma sprayed hydroxyapatite coatings by Al2O3 reinforcement.,” Mater. Sci. Eng. C. Mater. Biol. Appl., 33, (2013) pp. 2838–45.
  25.  A. Rahman, R. Jayaganthan, R. Chandra, and R. Ambardar, “High temperature degradation behavior of sputtered nanostructured Co-Al coatings on superalloy,” Appl. Surf. Sci., 265, (2013), pp. 10–23.
  26.  S. K. Rajput et al., “Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps,” Mater. Sci. Eng. A, 587, (2013),  pp. 291–300.
  27. P. N. Rao, D. Singh, and R. Jayaganthan, “Effect of annealing on microstructure and mechanical properties of Al 6061 alloy processed by cryorolling,” Mater. Sci. Technol., 29, (2013), pp. 76–82.
  28.   S. K. Rawal, A. K. Chawla, R. Jayaganthan, and R. Chandra, “Effect of power variation on wettability and optical properties of co-sputtered titanium and zirconium oxynitride films,” Bull. Mater. Sci., 36, (2013), pp. 403–409.
  29.  J. V. N. Sarma, R. Chowdhury, and R. Jayaganthan, “Mechanical behavior of gallium nitride nanosheets using molecular dynamics,” Comput. Mater. Sci., 75, (2013), pp. 29– 34.
  30.  J. V. N. Sarma, R. Chowdhury, and R. Jayaganthan, “Molecular dynamics investigation of the thermomechanical behavior of monolayer GaN,” J. Appl. Phys., 113, (2013), pp. 243-255.
  31. V. N. Shukla, R. Jayaganthan, and V. K. Tewari, “Degradation Behavior of Nanostructured Coatings Deposited by High-Velocity Arc Spraying Process in an Actual Environment of a Coal-Fired Boiler,” Jom, 65, (2013), pp. 784–791.
  32. V. N. Shukla, R. Jayaganthan, and V. K. Tewari, “Environmental degradation behavior of high-velocity arc sprayed fecrbmnsi alloy coatings in a coal fired boiler,” Acta Metall. Sin., 26, (2013), pp. 602–612.
  33. D. Singh, P. Nageswara Rao, and R. Jayaganthan, “Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealing,” Int. J. Miner. Metall. Mater., 20, (2013), pp. 759–769.

2014

  1. D. Singh, P. N. Rao, and R. Jayaganthan, “Effect of deformation temperature on mechanical properties of ultrafine grained Al-Mg alloys processed by rolling,” Materials and Design, 50, (2014), pp. 646–655.
  2. D. Singh, P. Nageswara Rao, and R. Jayaganthan, “High cyclic fatigue behaviour of ultrafine grained Al 5083 alloy,” Materials Science and Technology, 30, (2014), pp. 1835–1842.
  3. V.K. Jeenagar, Vivek Pancholi, B.S.S. Daniel, “Influence of cell wall microstructure on the energy absorption capability of aluminium foam”, Journal of Materials and Design, 56, (2014), 454-459.
  4.  M. Jana, A. Sil and S. Ray, “Morphology of carbon nanostructures and their electrochemical performance for lithium ion battery,” Journal of Physics and Chemistry of Solids, 75, (2014), pp. 60-67.
  5. M. Jana, A. Sil and S. Ray, “Growth and morphology of carbon nanostructures on nickel oxide nanoparticles in catalytic chemical vapour deposition,” Applied Physics A, 117, (2014), pp.1425-1436.
  6. Sandan Kumar Sharma, B. Venkata Manoj Kumar, Kwang-Young Lim, Young-Wook Kim, S.K. Nath, “Erosion behaviour of SiC-WC composites”, Ceramics International, 40, (2014), pp. 6829-6839.
  7. Bhingole P.P., Chaudhari G.P., Nath, S.K., “ Processing, microstructure and properties of ultrasonically processed in situ MgO-Al2O3-MgAl2O4 dispersed magnesium alloy composites”, Applied Science and Manufacturing, 66, (2014) 209-217.
  8. Brij Kishor, G P Chaudhari, S.K. Nath, “Cavitation erosion of thermomechanically processed 13/4 martensitic stainless steel”, Wear, 319, (2014), pp. 150-159.
  9. Rajput, S.K., Chaudhari, G.P., Nath, S.K., “Physical Simulation of Hot Deformation of Low-Carbon Ti-Nb Microalloyed Steel and Microstructural Studies”, Journal of Materials Engineering and Performance, 23, (2014), pp. 2930-2942.
  10. Kumar, H., Chaudhari, G.P., “Creep behavior of AS41 alloy matrix nano-composites”, Materials Science and Engineering A, 607, (2014), pp. 435-444.
  11. Muley, S.V., Singh, S.P., Sinha, P., Bhingole, P.P., Chaudhari, G.P., “Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behaviour”, Materials and Design, 53, (2014), pp. 475-481.
  12. Agarwal, N., Chaudhari, G.P., Nath, S.K., “Slurry and cavitation erosion of HSLA steel processed by warm multidirectional forging and inter-critical annealing” ,Tribology International, 70, (2014), pp. 18-25.
  13. U. Prakash, P. C. Tewari and D. Khanduja, “Analysis of powder metallurgy process parameters for relative density of low carbon alloy steel using design of experiments tool, Applied Mechanics and Materials, 72, (2014), pp.502-594.
  14. R. Sunil Kumar, U. Prakash, S.K.Nath and R.G. Baligidad, “Workability Studies on high Al ferritic Fe-Al-C Alloys”, Journal of Metals, 66, (2014), pp.1800-1808.
  15. N. Sahu, A. Selokar and U. Prakash, “Thermomechanical behavior of 23/8 nitrogen steel”, ISIJ International, 54, (2014), pp.970.
  16. D.V.V. Satyanarayana, U. Prakash, S. Khaple, R.G. Baligidad and V.V.S. Prasad, “Creep behavior of a carbon containing Fe3Al alloy”, Materials at High Temperatures, 31 (2014) pp. 258.
  17. Saxena K.K., Yadav S.D., Sonkar S., Pancholi V., Chaudhari G.P., Srivastava D., Dey G.K.,  Jha S.K., Saibaba N., “Effect of Temperature and Strain Rate on Deformation Behavior of Zirconium Alloy: Zr-2.5 Nb”, Procedia Materials Science, 6, (2014), pp. 278-283.
  18. Saxena K.K., Sonkar S., Kumar R.,  Pancholi V., Chaudhari G.P., Srivastava D., Dey G.K.,  Jha S.K., Saibaba N., “Effect of Temperature and Strain Rate on Deformation Behavior of Zirconium Alloy Zr-2.5 Nb-0.5 Cu”, Procedia Materials Science, 6 ,(2014), pp. 188-193.
  19. Pradeep, S., Pancholi, V., “Superplastic forming of multipass friction stir processed aluminum alloy”, Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science, 45, (2014), pp. 6207-6216.
  20. Jeenager, V.K., Pancholi, V., Daniel, B.S.S., “Influence of cell wall microstructure on the energy absorption capability of aluminium foam”, Materials and Design, 56, ,(2014), pp. 454-459.
  21. D. Lahiri, F. Hec, M. Thiesse, A. Durygin, C. Zhang, A. Agarwal, “Nanotribological Behavior of Graphene Nanoplatelet Reinforced Ultra High Molecular Weight Polyethylene Composites”, Tribology International, 70, (2014), pp. 165-169. 
  22. Nieto, A. Kumar, D. Lahiri, C. Zhang, S. Seal, A.  Agarwal, “Oxidation Behavior of Graphene NanoPlatelets Reinforced Tantalum Carbide Composites in High Temperature Plasma Flow”, Carbon, 67, (2014), pp. 398-408. 
  23. S. Das, D. Lahiri, A. Agarwal, W. Choi,  “Interfacial bonding characteristics between graphene and dielectric substrates”, Nanotechnology, 25, (2014), pp. 045707.
  24. S.B. Pitchuka, B. Boesl, C. Zhang, D. Lahiri, A. Nieto, G. Sundararajana, A. Agarwal, “Dry sliding wear behavior of cold sprayed aluminium amorphous/nanocrystalline alloy coatings”, Surface and Coatings Technology,  238, (2014), pp. 118-125.
  25. S.B. Pitchuka, D. Lahiri, G. Sundararajan, A. Agarwal, “Scratch Induced Deformation Behavior of Cold Sprayed Aluminum Amorphous/Nanocrystalline Coatings at Multiple Load Scales”, Journal of Thermal Spray Technoogy, 23, (2014), pp. 502-513.
  26. Gupta, S. Barkam, D. Lahiri, R. Balasubramanian, K. Balani, “Effect of Alumina Dispersion on Microstructural and Nanomechanical Properties of Pulse Electrodeposited NickeleAlumina Composite Coatings”, Journal of Materials Science and Technology, 30, (2014), pp. 808-813.
  27. A. Lodh, A. Biswas and S. Das, “Modeling the hot strength behavior of steel”, Ironmaking and Steelmaking, 42, (2014), pp. 290-301.
  28. S. Das and A. Haldar, “Formation of fully pearlitic microstructure in medium carbon steel”,  Philosophical Magazine, 94, (2014), pp. 3281-3294.
  29. S. Das, O. N. Mohanty and S. B. Singh, “A Phenomenological Model for Bake Hardening in Minimal Carbon Steels”, Philosophical Magazine, 94, (2014),  pp. 2046-2061.
  30. S. Das and A. Haldar, “Continuously cooled ultrafine bainitic steel with excellent strength-elongation combination”,  Metallurgical and Materials Transactions A, 45, (2014), pp. 1844-1854.
  31. G. Mittal, I. Lahiri, “Recent progress in nanostructured next-generation field emission devices”, Journal of Physics D: Applied Physics, 47, (2014), pp. 323001. 
  32. B. Li, P. Kang, H. Gou, G. Wu, S. Mula, “Surface morphology evolution and ablation mechanism of SiC-Si multiphase ceramic coating on graphite under oxy-acetylene flame”, Corrosion Science,  88,  (2014), pp.473-480.
  33. K. Pengchao, Z. Bin, W. Gaohui, G. Huasong,C. Guoqin, J. Longtao, S. Mula, “Synthesis of β-SiC Nanowires by ball milled nanoparticles of Si and C”, Journal of Alloys and Compounds, 604, (2014), pp. 304-308.
  34. Suhrit Mula, J. Panigrahi, P.C. Kang, Carl C. Koch, “Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites”, Journal of Alloys and Compounds,  588, (2014), pp. 710-715.
  35. Dhawan, N., Safarzadeh, M.S., Miller, J.D., Moats, M., Free, M., “Understanding the agglomeration behavior of nickel laterite and gold ore using statistical design of experiments”,  Minerals and metallurgical processing, 31 (2014), pp. 21-33.
  36. Dhawan, N.,  Rashidi, S., Rajamani, R.K., “Population balance model of crushed ore agglomeration for heap leach operations”, KONA Powder and Particle Journal, 31, (2014) pp. 200-213.
  37. Jena, S.K., Dhawan N., Rao, D. S., Mishra B. K., B. Das, “Studies on extraction of potassium values from nepheline syenite”,  International Journal of Mineral Processing, 133, (2014), pp. 13–22.
  38. Rath, S.S., Rao, D.,Dhawan, N.,  Das, B., Mishra, B.K., “Optimal recovery of iron values from a low grade iron ore using reduction roasting and magnetic separation”, Separation Science and Technology, 49, (2014), pp.1927-1936.
  39. Jena, S.K., Singh, S., Dhawan N., Rao, D. S., B. Das, “Characterization and Removal of iron from Pyrophyllite ore for Industrial applications”, Minerals & Metallurgical Processing, 32 (2014), pp.102-110.
  40. R. Sunil Kumar, U. Prakash, S. K. Nath, and R. G. Baligidad, “Workability Studies on High Al Ferritic Fe???Al???C Alloys,” Journal of Metals, 66, (2014), pp. 1800–1808.
  41. N. Agarwal, G. P. Chaudhari, and S. K. Nath, “Slurry and cavitation erosion of HSLA steel processed by warm multidirectional forging and inter-critical annealing,” Tribol. Int., 70, (2014), pp. 18–25.
  42. P. P. Bhingole, G. P. Chaudhari, and S. K. Nath, “Processing, microstructure and properties of ultrasonically processed in situ MgO-Al2O3-MgAl2O4 dispersed magnesium alloy composites,” Composites Part A Applied Science Manufacturing, 66, (2014), pp. 209–217.
  43. S. Ghanaraja, S. K. Nath, and S. Ray, “Processing and Mechanical Properties of Cast Al (Mg, Mn)-Al2O3 (MnO2) Composites Containing Nanoparticles and Larger Particles,” Metallurgical Materials Transaction A-Physical Metallurgy and Materials Science, 45A, (2014), pp. 3467–3480.
  44. S. Goel, R. Jayaganthan, I. V. Singh, D. Srivastava, G. K. Dey, and N. Saibaba, “Mechanical and microstructural characterizations of ultrafine grained Zircaloy-2 produced by room temperature rolling,” Materials and Design, 55, (2014), pp. 612–618.
  45. S. Goel et al., “Texture and Mechanical Behavior of Zircaloy-2 Rolled at Different Temperatures,”Journal of Materials Engineering and performance, 24, (2014), pp. 618–625.
  46. S. Goel et al., “Development of Ultrafine Grained Zircaloy-2 by Room Temperature Cross Rolling,” Journal of Materials Engineering and performance, 24, (2014), pp. 609–617.
  47. S. Goel et al., “Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling,” Materal Science Enineering A, 603, (2014), pp. 23–29.
  48. M. Hussain, P. N. Rao, D. Singh, R. Jayaganthan, and S. Singh, “Comparative study of microstructure and mechanical properties of al 6063 alloy processed by multi axial forging at 77k and cryorolling,” Procedia Engineering, 75, (2014), pp. 129–133.
  49. A. Karmakar, S. Sivaprasad, S. K. Nath, R. D. K. Misra, and D. Chakrabarti, “Comparison between different processing schedules for the development of ultrafine-grained dual-phase steel,” Metallurgical Materials Transaction A-Physical Metallurgy and Materials Science, 45, (2014), pp. 2466–2479.
  50. B. Kishor, G. P. Chaudhari, and S. K. Nath, “Cavitation erosion of thermomechanically processed 13/4 martensitic stainless steel,” Wear, 319, (2014), pp. 150–159.
  51. V. Kumar, I. V. Singh, B. K. Mishra, and R. Jayaganthan, “Improved fracture toughness of cryorolled and room temperature rolled 6082 al alloys,” Acta Metallurgica Sinica 27, (2014), pp. 359–367.
  52. P. Nageswara rao, D. Singh, and R. Jayaganthan, “Effect of post cryorolling treatments on microstructural and mechanical behaviour of ultrafine grained Al-Mg-Si alloy,” Journal of Material Science and Technology, 30, (2014), pp. 998–1005.
  53. A. Rahman, R. Jayaganthan, and R. Chandra, “Study of structural and optical properties of Zn1-xAl xO nanoparticles,” Materials Science in Semiconductor Processing,18, (2014), pp. 15–21.
  54. S. K. Rajput, G. P. Chaudhari, and S. K. Nath, “Physical simulation of hot deformation of low-carbon Ti-Nb microalloyed steel and microstructural studies”, Journal of Materials Engineering and performance, 23, (2014), pp. 2930–2942.
  55. N. Rana, R. Jayaganthan, and S. Prakash, “Microstructural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOF process,” Surface Coatings Technology, 260, (2014), pp. 28–33.
  56. N. Rana, R. Jayaganthan, and S. Prakash, “Stepwise depletion of coating elements as a result of hot corrosion of NiCrAlY coatings,” Journal of Materials Engineering and performance, 23, (2014), pp. 643–650.
  57. N. Rana, R. Jayaganthan, and S. Prakash, “Stepwise oxidation mechanism of HVOF sprayed NiCrAlY coatings in air,” Transactions of  Indian Institute of Metals, 67, (2014), pp. 393–400.
  58. N. Rana, M. M. Mahapatra, R. Jayaganthan, and S. Prakash, “Deposition of nanocrystalline coatings by modified LVOF thermal spray method,” Journal of Alloys and Compounds, 615, (2014), pp. 779–783.
  59. P. N. Rao, D. Singh, and R. Jayaganthan, “Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature,” Materials and Design, 56, (2014), pp. 97–104.
  60. P. N. Rao, B. Viswanadh, and R. Jayaganthan, “Effect of cryorolling and warm rolling on precipitation evolution in Al 6061 alloy,” Material Science and Engineering  A, 606, (2014), pp. 1–10.
  61. S. Zhang, H. Yang, and L. Singh, “Increased information leakage from text,” CEUR Workshop Proceedings, 1225, (2014), pp. 41–42.
  62. S. K. Rawal, A. K. Chawla, R. Jayaganthan, and R. Chandra, “The influence of various sputtering parameters on structural, wettability and optical properties of Zr2ON2 thin films,” Material Science and Engineering B Solid-State Mater. Adv. Technol., 181, (2014), pp. 16–23.
  63. S. K. Sharma, B. Venkata Manoj Kumar, K. Y. Lim, Y. W. Kim, and S. K. Nath, “Erosion behavior of SiC-WC composites,” Ceramic International, 40, (2014), pp. 6829–6839.
  64. R. Sunil Kumar, U. Prakash, S. K. Nath, and R. G. Baligidad, “Workability Studies on High Al Ferritic Fe???Al???C Alloys,” Journal of Metals, 66, (2014), pp. 1800–1808.
  65. P. Trivedi, S. Srivastava, R. Jayaganthan, R. Chandra, and P. Roy, “Applied Surface Science Characterization and in vitro biocompatibility study of Ti – Si – N nanocomposite coatings developed by using physical vapor deposition,” Applied Surface Science, 293, (2014), pp. 143–150.

2015

  1. P. N. Rao, D. Singh, H. G. Brokmeier, and R. Jayaganthan, “Effect of ageing on tensile behavior of ultrafine grained Al 6061 alloy,” Materials Science Engineering A, 641, (2015), pp. 391–401.
  2. Anjan Sil, Rajni Sharma and Subrata Ray, “Mechanical and thermal characteristics of PMMA-based nanocomposite gel polymer electrolytes with CNFs dispersion”, Surface and Coatings Technology, 271 (2015), pp. 201-206.
  3. P. Chaturvedi, A. Kumar, A. Sil and Y. Sharma, “Cost effective urea combustion derived mesoporous-Li2MnSiO4 as a novel material for supercapacotor,” RSC (The Royal Society of Chemistry) Advances, 5, (2015), pp. 25156.
  4. Rajeev Sehrawat, Anjan Sil, Synthesis and characterization of LiFePO4-C/ PANI composite for cathode material of lithium ion battery, Advanced Materials Research, 585, (2015), pp. 240-244.
  5. Rajeev Sehrawat, Anjan Sil, Polymer gel combustion synthesis of LiFePO4/C composite as cathode material for Li-ion battery, Ionics, 21, (2015), pp. 673–685
  6. Rajeev Sehrawat, Anjan Sil, Effect of solvents on electrochemical performance of polypyrole coated LiFePO4/C cathode materials for Li-ion battery, Journal of Materials Science26, (2015), pp.5175-5185.
  7. Sameer Chouksey, Anjan Sil, Debrupa Lahiri, Indranil Lahiri, “Atmospheric Oxidation Effect of Si-CNT Anode on Li-ion Battery Performance,” Nanomaterials and Energy, 4, (2015), pp. 153-158.
  8. Hari Raj, Sobhit Saxena and Anjan Sil, “Internal hybrid system of Li-ion battery and supercapacitor,” Journal of Basic and Applied Engineering Research, 2, (2015), pp. 937 – 940
  9. Supriya Gupta, Sandan Kumar Sharma, B. Venkata Manoj Kumar, Young-Wook Kim, “ Tribological characteristics of SiC ceramics sintered with a small amount of yttria”, Ceramics International, 41, (2015), pp. 14780-14789.
  10. Sandan Kumar Sharma, B. Venkata Manoj Kumar, Young-Wook Kim, “Effect of WC addition on sliding wear behavior of SiC ceramics”, Ceramics International, 41, (2015), pp.3427-3437.
  11. Manoj Kumar R, Sandan Kumar Sharma, B. V. Manoj Kumar, Debrupa Lahiri, “Effects of Carbon Nanotube Aspect ratio on strengthening and tribological behaviour of ultra high molecular weight polyethylene composite”, Composites, 76, (2015), pp. 62-72.
  12. Yashpal, Vipin Sharma, B.V. Manoj Kumar, Issues in determining size of nano-crystalline ceramic particles by X-ray diffraction, Materials Today: Proceedings, 2, (2015), pp. 3534 – 3538.
  13. Vipin Sharma, Yashpal, B. V. Manoj Kumar, Ujjwal Prakash, “Friction stir processing strategies of uniform distribution of reinforcement in a surface composite”, Materials and Manufacturing Processes, 31, (2016), pp. 1384–1392.
  14. Selokar , U. Prakash, D. B. Goel, B. V. Manoj Kumar, “Cavitation erosion and solid particle erosion behaviour of a nitrogen alloyed austenitic stainless steel”, ISIJ International, 55, (2015), pp.1123-1130.
  15. Vipin Goyal, Sandan Kumar Sharma, B. Venkata Manoj Kumar, “Effect of lubrication on tribological behaviour of martensitic stainless steel Materials Today: Proceedings, 2, (2015), pp. 1082 – 1091.
  16. D. C. Joshi, S. Nayak, P. Suresh , K. S. Suresh, B. V. Manoj Kumar, and S. Thota, “The X-ray photoelectron spectroscopy and high-temperature structural studies of Zn1−xNixO/NiO two-phase composites”,  Physica Status Solidi B, 252, (2015), pp. 2323-2329.
  17. Vipin Sharma, U. Prakash, B.V. Manoj Kumar “Microstructural and mechanical characteristics of AA2014/SiC surface composite fabricated by friction stir processing”,  Materials Today: Proceedings, 2, (2015), pp. 2666 – 2670.
  18. Santanu Das, Raj Kumar, Santu Kaity, Suman Neogy, K.N. Hareendran, S.B. Roy, G.K. Dey, B.S.S. Daniel, G.P. Chaudhari, “Characterization of microstructural, mechanical and thermal properties and ageing study of Th–3 wt % U alloy”, Nuclear Engineering and Design ,282, (2015), pp. 116–125.
  19. Yashwant Mehta, V.V. Dabhade, G.P. Chaudhari, “Metallography of Fe-P-C and Fe-P-C-Si-N alloys”, Metallography, Microstructure, and Analysis, 4, (2015), pp. 488-496.
  20. S.D. Yadav, P.P. Bhingole, G.P. Chaudhari, S.K. Nath and C.Sommitsch, “Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites”, Key Engineering Materials,53,(2015), pp. 783-788.
  21. Kodli B.K., Saxena K.K., Dey S.R., Pancholi V., Bhattacharjee A., “Texture studies of hot compressed near alpha titanium alloy (IMI 834) at 1000° C with different strain rates”, IOP Conference Series: Materials Science and Engineering, 82, (2015), pp.125-135
  22. P. Gupta, S. Sharan, P. Roy, D. Lahiri, “Aligned Carbon Nanotube Reinforced Polymeric Scaffolds with Electrical Cues for Neural Tissue Regeneration”, Carbon, 95, (2015), pp. 715-724. 
  23. K. Saini, R.M. Kumar, D. Lahiri, I. Lahiri, “Quantifying Bonding Strength of CuO Nanotubes with Substrate Using Nano-Scratch Technique”, Nanotechnology,26, (2015), pp. 305701. 
  24. R.M. Kumar, S. Sharma, B.V.M. Kumar, D. Lahiri, “Effects of Carbon Nanotube Aspect Ratio on Strengthening and Tribological Behaviour of Ultra High Molecular Weight Polyethylene Composite”, Composites A, 76, (2015), pp. 62-72. 
  25. S.Singh, R. Manoj Kumar, K.K. Kuntal, P. Gupta, S. Das, R. Jayaganthan, P. Roy, D. Lahiri, “Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application”, JOM, 67, (2015), pp. 702-712. 
  26. S. Chouksey, A.Sil, D. Lahiri, I. Lahiri , “Atmospheric oxidation effect of silicon-carbon nanotube anode on Li-ion battery performance”, Nanomaterials and Energy, 4, (2015), pp. 1-20.
  27. K.S. Suresh, D. Lahiri, A. Agarwal, S. Suwas, “Microstructure Dependent Elastic Modulus Variation in NiTi Shape Memory Alloy”, Journal of Alloys and Compounds, 633, (2015), pp. 71-74. 
  28. D. Lahiri, J. Karp, A.K. Keshri, C. Zhang, G.S. Dulikravich, L.J. Kecskes, A. Agarwal, “Scratch Induced Deformation Behavior of Hafnium Based Bulk Metallic Glass at Multiple Load Scales”, Journal of Noncrystalline Solids, 410, (2015), pp. 118-126.
  29. P. Trivedi, S. Goel, S. Das, R. Jayaganthan, D. Lahiri, P. Roy, “Biocompatibility of Ultrafine Grained Zircaloy-2 Produced by Cryorolling for Medical Applications”, Material Science and Engineering C, 46, (2015), pp. 309-315. 
  30. Sameer Chouksey, Anjan Sil, Debrupa Lahiri, Indranil Lahiri, “Atmospheric oxidation effect of silicon-carbon nanotube anode on Li-ion battery performance”, Nanomaterials and Energy, 4, (2015), pp. 153-158.
  31. Krishna Saini, Manoj Kumar R., Debrupa Lahiri, Indranil Lahiri, “Quantifying Bonding Strength of CuO Nanotubes with Substrate Using Nano-Scratch Technique”, Nanotechnology, 26, (2015), 305701.
  32.  Gaurav Mittal,Mamta Khaneja, Krishna Saini, Indranil Lahiri, “Carbon nanotube based 3-dimensional hierarchical field emitter structure. RSC Advances”, 5, (2015), 21487-21494.
  33. S.M. Dasharath, Carl C. Koch, Suhrit Mula, “Effect of stacking fault energy on mechanical properties and strengthening mechanisms of brasses processed by cryorolling”, Materials Characterization, 110, (2015), pp. 14–24.
  34. Sumit Ghosh, Suhrit Mula, “Thermomechanical processing of low carbon Nb–Ti stabilized microalloyed steel:Microstructure and mechanical properties” ,Materials Science and Engineering: A,  646,  (2015), pp. 218-233.
  35. Suhrit Mula, Daria Setman, Khaled Youssef, R.O. Scattergood, Carl C Koch, “Structural evolution of Cu(1−X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties”, Journal of Alloys and Compounds,  627,  (2015), pp. 108-116.
  36. Ravi Kumar, S.M. Dasharath, P.C. Kang, Carl C. Koch, Suhrit Mula, “Enhancement of mechanical properties of low stacking fault energy brass processed by cryorolling followed by short-annealing”, Materials & Design,  67,( 2015), pp. 637-643.
  37. Jena, S.K., Dhawan N., Rao, D. S., B. Das, “Extraction of potassium values from pyrophyllite mine waste”, Separation Science Technology, 51, (2015), pp. 269-277.
  38. R. Kant, U. P. Vijaya, and A. V. V Satya, “FeAl Based Intermetallic Matrix Composites Through Melt Route,” Trans. Indian Inst. Met., 68,(2015), pp. 1155–1160.
  39. A. Selokar, U. Prakash, D. B. Goel, and B. V. M. Kumar, “Cavitation Erosion and Solid Particle Erosion Behaviour of a Nitrogen Alloyed Austenitic Stainless Steel,” ISIJ Int., 55, (2015), pp. 1123–1130.
  40. V. Sharma, U. Prakash, and B. V. M. Kumar, “Surface composites by friction stir processing: A review,” J. Mater. Process. Technol., 224, (2015), pp. 117–134.
  41. Y. Mehta, S. K. Rajput, V. V. Dabhade, and G. P. Chaudhari, “Physical Simulation of Hot Deformation and Microstructural Evolution of Fe-0.05C-0.13P Steel,” J. Mater. Eng. Perform., 25, (2015), pp. 1376–1383.
  42. T. C. Joshi, U. Prakash, and V. V. Dabhade, “Effect of Nano-Scale and Micro-Scale Yttria Reinforcement on Powder Forged AA-7075 Composites,” J. Mater. Eng. Perform., 25, (2015),pp. 1889–1902.
  43. Y. Mehta, V. V Dabhade, and G. P. Chaudhari, “Effect of Silicon and Nitrogen on the Microstructure and Mechanical Behavior of High-Phosphorous Steels,” Metallogr. Microstruct. Anal., 5, (2015), pp. 384–391.
  44. D. D. Mishra, P. Makkar, P. K. Rath, V. V. Dabhade, V. Agarwala, and R. C. Agarwala, “Effect of Ti Particle Size on the Reaction Kinetics and Densification of TiAl Intermetallics,” Trans. Indian Inst. Met., 70, (2015), pp. 1–11.
  45. D. D. Mishra, V. V. Dabhade, V. Agarwala, and R. C. Agarwala, “Effect of Al particle size on the reaction kinetics and densification of TiAl intermetallics,” Phase Transitions, 87, (2015), pp. 344–356.
  46. B. B. Panigrahi, V. V. Dabhade, and M. M. Godkhindi, “Thermal expansion behaviour of nanocrystalline titanium powder compacts,” Mater. Lett., 59, (2015), pp. 2539–2541.
  47. C. M. Y. Peter J. Barile, Allan W. Stoner, “The Ethical Import of Patient Selection,” AJOB Neurosci., 4, (2015), pp. 42–43.
  48. S. K. Rajulapati, U. Prakash, K. Laha, and V. V. Dabhade, “Studies on alloying process of a ferritic/martensitic oxide dispersion strengthened (ODS) steel prepared by mechanical alloying of elemental powders,” Powder Metall., 59, (2015), pp. 350–358.
  49. S. S. Rathore and V. V. Dabhade, “Dimensional Change During Sintering of Fe–Cu–C Alloys: A Comparative Study,” Trans. Indian Inst. Met., 69, (2015), pp. 991–998.
  50. S. S. Rathore and V. V. Dabhade, “Hardenability of sinter-forged Fe-2Cu-0.7C-xMo alloys,” J. Alloys Compd., 664, (2015), pp. 133–140.
  51. S. S. Rathore, M. M. Salve, and V. V. Dabhade, “Effect of molybdenum addition on the mechanical properties of sinter-forged Fe–Cu–C alloys,” J. Alloys Compd., 649, (2015), pp. 988–995.
  52. L. Yuan-Kun and S. Seppo, “Review The coming of age of probiotics,” Trends Food Sci. Technol., 6, (2015), pp. 241–245.
  53. C. C. Acta, “Clinica Chimica Biochemical and molecular investigations in respiratory chain deficiencies,” 44, (2015), pp. 1–2.
  54. Y. Mehta, V. V Dabhade, and G. P. Chaudhari, “Metallography of Fe – P – C and Fe – P – C – Si – N Alloys,” Metallogr. Microstruct. Anal., 4, (2015), pp. 488–496.
  55. V. Chauhan, P. Dubey, S. Verma, R. Jayaganthan, and R. Chandra, “Dry Sliding and Abrasive Wear Behavior of Nanostructure Zr–W–N Coating,” Trans. Indian Inst. Met., 68, (2015), pp. 799–807.
  56. D. Fuloria, S. Goel, R. Jayaganthan, D. Srivastava, G. K. Dey, and N. Saibaba, “Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature,” Trans. Nonferrous Met. Soc. China, 25, (2015), pp. 2221–2229.
  57. S. Ghanaraja, S. Ray, and S. K. Nath, “Synthesis and Mechanical Properties of Cast Alumina Nano-particle Reinforced Metal Matrix Composites,” Mater. Today Proc., 2, (2015), pp. 3656–3665.
  58. S. Goel, R. Jayaganthan, I. V. Singh, D. Srivastava, G. K. Dey, and N. Saibaba, “Texture evolution and ultrafine grain formation in cross-cryo-rolled zircaloy-2,” Acta Metall. Sin28, (2015), pp. 837–846.
  59. M. Hussain, P. Nageswara Rao, and R. Jayaganthan, “Development of Ultrafine-Grained Al–Mg–Si Alloy Through SPD Processing,” Metallogr. Microstruct. Anal., 4, (2015), pp. 219–228.
  60. N. Kumar, S. Goel, R. Jayaganthan, and H.-G. Brokmeier, “Effect of Solution Treatment on Mechanical and Corrosion Behaviors of 6082-T6 Al Alloy,” Metallogr. Microstruct. Anal., 4, (2015), pp. 411–422.
  61. N. Kumar, P. N. Rao, R. Jayaganthan, and H. G. Brokmeier, “Effect of cryorolling and annealing on recovery, recrystallisation, grain growth and their influence on mechanical and corrosion behaviour of 6082 Al alloy,” Mater. Chem. Phys., 165, (2015), pp. 177–187.
  62. N. Rana, M. M. Mahapatra, R. Jayaganthan, and S. Prakash, “High-Temperature Oxidation and Hot Corrosion Studies on NiCrAlY Coatings Deposited by Flame-Spray Technique,” J. Therm. Spray Technol., 24, (2015), pp. 769–777.
  63. V. N. Shukla, R. Jayaganthan, and V. K. Tewari, “Degradation Behavior of HVOF-Sprayed Cr3C2-25%NiCr Cermet Coatings Exposed to High Temperature Environment,” Mater. Today Proc., 2, (2015), pp. 1805–1813.
  64. S. Singh et al., “Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application,” Jom, 67, (2015),  pp. 702–712.
  65. P. Trivedi, S. Goel, S. Das, R. Jayaganthan, D. Lahiri, and P. Roy, “Biocompatibility of ultrafine grained zircaloy-2 produced by cryorolling for medical applications,” Mater. Sci. Eng. C, 46, (2015), pp. 309–315.
  66. P. Trivedi, A. K. Patel, R. Maurya, R. Jayaganthan, and K. Balani, “Nanomechanical Characterization and Protein Adsorption of Cold-Rolled Zirconium Alloy,” Jom, 67, (2015), pp. 726–732.
  67. J. V. N. Sarma, A. Rahman, R. Jayaganthan, R. Chowdhury, and D. Haranath, “Al -doped ZnO Nanostructured Thin Films: Density Functional Theory and Experiment,” Int. J. Nanosci., 14, pp. 1550015.
  68. B. P. Agrawal and P. K. Ghosh, “Influence of thermal characteristics on microstructure of pulse current GMA weld bead of HSLA steel,” Int. J. Adv. Manuf. Technol., 77, (2015), pp. 1681–1701.
  69. P. K. Ghosh and R. Kumar, “Surface Modification of Micro-Alloyed High-Strength Low-Alloy Steel by Controlled TIG Arcing Process,” Metallurgical and Materials Transactions A, 46 (2015), 831-842.
  70. P. K. Ghosh, A. Kumar, and K. Kumar, “Improving thermal and electrical properties of graphene–PMMA nanocomposite,” Polym. Sci. Ser. A, 57, (2015), pp. 829–835.
  71. P. K. Ghosh, K. Kumar, and N. Chaudhary, “Influence of ultrasonic dual mixing on thermal and tensile properties of MWCNTs-epoxy composite,” Compos. Part B Eng., 77, (2015), pp. 139–144.
  72. P. K. Ghosh, K. Kumar, and A. Kumar, “Studies on Thermal and Mechanical Properties of Epoxy-Silicon Oxide Hybrid Materials,” J. Mater. Eng. Perform., 24, (2015), pp. 4440–4448.
  73. M. S. Goyat, S. Suresh, S. Bahl, S. Halder, and P. K. Ghosh, “Thermomechanical response and toughening mechanisms of a carbon nano bead reinforced epoxy composite,” Mater. Chem. Phys., 166, (2015), pp. 144–152, 2015.
  74. S. Halder, M. S. Goyat, and P. K. Ghosh, “Influence of ultrasonic dual mode mixing on the morphology, molecular structure and thermo-physical properties of a SiO2-epoxy nanocomposite adhesive,” J. Adhes. Sci. Technol., 29, (2015), pp. 2590–2604.
  75. S. Das et al., “Characterization of microstructural, mechanical and thermal properties and ageing study of Th-3 wt.% U alloy,” Nucl. Eng. Des., 282, (2015), pp. 116–125.
  76. Dhawan, N., Safarzadeh, M.S., Miller, J.D., Moats, M., Free, M., 2013, Understanding the agglomeration behavior of selected copper ores using statistical design of experiments, Mineral Processing and Extractive Metallurgy Review, 36, (2015), pp. 13-25.
  77. K.Jha, N. Suksawang, D. Lahiri, A. Agarwal, “A Novel Energy-based Method to Evaluate Indentation Modulus and Hardness of Cementitious Materials from Nanoindentation Load–Displacement Data”, Materials and Structures, 48, (2015), pp. 2915-2927.
  78. R. Kant, U. Prakash, V. Agarwala, and V. V. Satya Prasad, “Wear behaviour of an FeAl intermetallic alloy containing carbon and titanium,” Intermetallics, 61, (2015), pp. 21–26.

2016

  1. P. Chaturvedi, A. Sil, and Y. Sharma, “Energy storage performance of urea combustion derived nanocrystalline- Li2MnSiO4as a novel electrode material for symmetric supercapacitor,” AIP Conference Proceedings,1731, (2016), pp.1–2.
  2. R. Sharma, A. Sil, and S. Ray, “Effect of carbon nanotube dispersion on electrochemical and mechanical characteristics of poly(methyl methacrylate)-based gel polymer electrolytes,”Polymer Composites, 37, (2016), pp.1936–1944.
  3. H. Raj, S. Saxena, and A. Sil, “Improved electrochemical performance of Li4Ti5O12 by reducing rutile TiO4 phase impurity and particle size,”Materials Science and Technology,(2016), pp.196.201.
  4. S. Saxena and A. Sil, “Nanoporous Li4Ti4O4Material for the Electrode of Lithium Ion Battery,” IETE Technical Review, 33, (2016), pp. 60–63.
  5. Vikas Verma, B. V. Manoj Kumar, Sinhoo Kang, “Sliding wear behaviour of TaC-containing Ti(CN)-WC-Ni/Co cermets”, International  Journal of Applied Ceramic Technology,13, (2016), pp.1033-1042.
  6. Sachin V. Muley, Amey N. Vidvans, G. P. Chaudhari, Sumit Udainiya, “An assessment of ultrafine grained 316L stainless steel for implant applications”, Acta Biomaterialia,  30, (2016), pp.408–419.
  7. Brij kishor, G.P. Chaudhari, S.K. Nath, “Slurry erosion of thermo-mechanically processed 13Cr4Ni stainless steel”, Tribology International, 93, (2016), pp. 50–57.
  8. Neeraj Srivastava, G.P. Chaudhari, “Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique”, Materials Science & Engineering A, 651, (2016), pp. 241-247.
  9. G.P. Chaudhari, “Corrosion of nanostructured and ultrafine grained metallic implant materials”, Materials Technology: Advanced Performance Materials, 31, (2016), pp. 812-817.
  10. S.K. Rajput, G.P. Chaudhari, S.K. Nath, “Characterization of hot deformation behavior of a low carbon steel using processing maps, constitutive equations and Zener-Hollomon parameter”, Journal of Materials Processing Technology,237,(2016), pp.113–125.
  11. S. Das, S. Kaity, R. Kumar, J. Banerjee, S.B. Roy, G.P. Chaudhari, B.S.S. Daniel, “Characterization of microstructural, mechanical and thermophysical properties of Th-52U alloy”, Journal of Nuclear Materials, 480, (2016), pp. 223-234.
  12. S. Das, S.B. Roy, G.P. Chaudhari, B.S.S. Daniel, “Microstructural evolution in as-cast Th-U alloys”, Progress in Nuclear Energy, 88, (2016), pp.285-296.
  13. Y. Mehta, S.K. Rajput, V. Dabhade, G.P. Chaudhari, “Physical simulation of hot deformation & microstructural evolution of Fe-0.05C-0.13P steel”, Journal of Materials Engineering and Performance, 25, (2016), pp.1376-1383.
  14. Brijkishor, G.P. Chaudhari, S.K. Nath, “Hot deformation characteristics of 13Cr-4Ni stainless steel using constitutive equation and processing map”, Journal of Materials Engineering and Performance, 25, (2016), pp.2651-2660.
  15. V. Kumar, N. Kumar, P.Roy, D. Lahiri, I Lahiri, “Emergence of fluorescence in boron nitride nanoflakes and its application in bioimaging”, RSC Advances, 6, (2016), pp. 48025-48032.
  16. P. Gupta, M. Rajput, N. Singla, V. Kumar, D. Lahiri, “Electric field and current assisted alignment of CNT inside polymer matrix and its effects on electrical and mechanical properties”, Polymer,  89, (2016), pp.119-127.
  17. S. Nayak, B. Bhushan, P. Gopinath, R.D. Agarwal, R. Jayaganthan, D. Lahiri, “Strengthening of Mg based alloy through grain refinement for orthopaedic application”, Journal of the Mechanical Behavior of Biomedical Materials, 59, (2016), pp.57-70.
  18. R.M. Kumar, K.K. Kuntal, S. Singh, B. Bhushan, P. Gopinath, D. Lahiri, “Electrophoretic deposition of hydroxyapatite coating on Mg–3Zn alloy for orthopaedic application”, Surface and Coatings Technology, 287, (2016), pp. 82-92. 
  19. A.K.Keshri, L. Behl, D. Lahiri, G.S. Duikravich, A. Agarwal, “Dry Sliding Wear Behavior of Hafnium-Based Bulk Metallic Glass at Room and Elevated Temperatures”, Journal of Materials Performances, 25, (2016), pp. 3931-3937.
  20. Raj Kumar, R. Manoj Kumar, Debrupa Lahiri, Indranil Lahiri, “Thermally reduced graphene oxide film on soda lime glass as transparent conducting electrode”, Surface and Coatings Technology, 309, (2017), pp. 931-937.
  21. SM Dasharath, Suhrit Mula. “Mechanical properties and fracture mechanisms of ultrafine grained Cu-9.6% Zn alloy processed by multiaxial cryoforging”, Materials Science and Engineering: A, 675, 15, (2016), pp.403–414.
  22. Sooraj S, V.M. Suntharavel Muthaiah, P.C. Kang, Carl C Koch, Suhrit Mula, “ Microstructural evolution and thermal stability of Fe-Zr metastable alloys developed by mechanical alloying followed by annealing”, Philosophical Magazine, 96, (2016) pp.2649–2670.
  23. V.M. Suntharavel Muthaiah, Suhrit Mula, “Effect of zirconium on thermal stability of nanocrystalline aluminium alloy prepared by mechanical alloying”, Journal of Alloys and Compounds, 688, (2016), pp.571–580.
  24. Sumit Ghosh, Ajay Kumar Singh, Suhrit Mula, “Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging”, Materials & Design, 100, (2016), pp. 47-57.
  25. SM Dasharath, Suhrit Mula, “ Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing”, Materials & Design, 99, (2016), pp.552-564.
  26. V.M. Suntharavel Muthaiah, Hari Babu L, Carl C Koch, Suhrit Mula, “ Feasibility of formation of nanocrystalline Fe-Cr-Y alloys, Mechanical properties and thermal stability”, Materials Characterization, 114, (2016), pp. 43-53.
  27. Amit Kumar Singh, Sumit Ghosh, Suhrit Mula, “Simultaneous improvement of strength, ductility and corrosion resistance of Al2024 alloy processed by cryoforging followed by ageing” , Materials Science and Engineering: A, 651, (2016), pp. 774-785.
  28. Jena, S.K., Dhawan N., Rath, S.S., Rao, D. S., Das, B., “Investigation of microwave roasting for potash extraction from nepheline syenite”, Separation and Purification Technology, 161, (2016), pp. 104–111.
  29. Rath, S., Dhawan N., Rao, D. S., Das, B., Mishra, B.K., “Beneficiation studies of a difficult to treat iron ore using conventional and microwave roasting”, Powder Technology, 301, (2016), pp.1016–1024.
  30. S. Chauhan, V. Verma, U. Prakash, and P. C. Tewari, “Analysis of powder metallurgy process parameters for mechanical properties of sintered Fe – Cr – Mo alloy steel,” Materials and  Manufacuring  Processes, 32, (2016), pp.1–5.
  31. R. Kant, U. Prakash, V. Agarwala, and V. V. Satya Prasad, “Effect of Carbon and Titanium Additions on Mechanical Properties of B2 FeAl,” Transactions of Indian Institute of Metal, 69, (2016), pp.845–850.
  32. R. Kant, U. Prakash, V. Agarwala, and V. V. S. Prasad, “Microstructure and wear behaviour of FeAl-based composites containing in-situ carbides,” Bulletin Materials Science, 39, (2016),  pp.1827–1834.
  33. Y. Mehta, S. K. Rajput, V. V. Dabhade, and G. P. Chaudhari, “Physical Simulation of Hot Deformation and Microstructural Evolution of Fe-0.05C-0.13P Steel,” Journal of Materials Engineering and Performance, 25, (2016), pp.1376–1383.
  34. T. C. Joshi, U. Prakash, and V. V. Dabhade, “Effect of Nano-Scale and Micro-Scale Yttria Reinforcement on Powder Forged AA-7075 Composites,” Journal of Materials Engineering and Performance, 25, (2016), pp. 1889–1902.
  35. Y. Mehta, V. V Dabhade, and G. P. Chaudhari, “Effect of Silicon and Nitrogen on the Microstructure and Mechanical Behavior of High-Phosphorous Steels,” Metallography, Microstructure and Analysis, 5, (2016), pp. 384–391.
  36. D. D. Mishra, P. Makkar, P. K. Rath, V. V. Dabhade, V. Agarwala, and R. C. Agarwala, “Effect of Ti Particle Size on the Reaction Kinetics and Densification of TiAl Intermetallics,” Transactions of Indian Institute of Metals, 70, (2016), pp.1–11.
  37. D. D. Mishra, V. V. Dabhade, V. Agarwala, and R. C. Agarwala, “Effect of Al particle size on the reaction kinetics and densification of TiAl intermetallics,” Phase Transitions, 87, (2016), pp.344–356.
  38. S. K. Rajulapati, U. Prakash, K. Laha, and V. V. Dabhade, “Studies on alloying process of a ferritic/martensitic oxide dispersion strengthened (ODS) steel prepared by mechanical alloying of elemental powders,” Powder Metallurgy, 59, (2016), pp.350–358.
  39. S. S. Rathore and V. V. Dabhade, “Dimensional Change During Sintering of Fe–Cu–C Alloys: A Comparative Study,” Transactions of Indian Institute of Metals, 69, (2016), pp. 991–998.
  40. S. S. Rathore and V. V. Dabhade, “Hardenability of sinter-forged Fe-2Cu-0.7C-xMo alloys,” Journal of Alloys and Compounds, 664, (2016), pp.133–140.
  41. S. S. Rathore, M. M. Salve, and V. V. Dabhade, “Effect of molybdenum addition on the mechanical properties of sinter-forged Fe–Cu–C alloys,” Journal of Alloys and Compounds, 649, (2016), pp. 988–995.
  42. V. Bhardwaj, R. Chowdhury, and R. Jayaganthan, “Nanomechanical and microstructural characterization of sputter deposited ZnO thin films,” Applied Surface Science, 389, (2016), pp.1023–1032.
  43. D. Fuloria, N. Kumar, S. Goel, R. Jayaganthan, S. Jha, and D. Srivastava, “Tensile properties and microstructural evolution of Zircaloy-4 processed through rolling at different temperatures,” Materials and Design, 103, (2016), pp. 40–51.
  44. D. Fuloria, P. Nageswararao, R. Jayaganthan, S. Jha, and D. Srivastava, “An investigation of deformed microstructure and mechanical properties of Zircaloy-4 processed through multiaxial forging,” Materials Chemistry and Physics, 173, (2016), pp.12–25.
  45. S. Goel et al., “Evaluating Fracture Toughness of Rolled Zircaloy-2 at Different Temperatures Using XFEM,” Journal of Materials Engineering and Performance, 25, (2016), pp.4046–4058.
  46. A. Joshi, N. Kumar, K. K. Yogesha, R. Jayaganthan, and S. K. Nath, “Mechanical Properties and Microstructural Evolution in Al 2014 Alloy Processed Through Multidirectional Cryoforging,” Journal of Materials Engineering and Performance, 25, (2016), pp.3031–3045.
  47. A. Joshi, K. K. Y. Nikhil, K. R. Jayaganthan, and R. Jayaganthan, “Influence of Annealing on Microstructural Evolution , Precipitation Sequence , and Fracture Toughness of Cryorolled Al – Cu – Si Alloy,” Metallography, Microstructure and Analysis, 5, (2016), pp.540–556.
  48. B. Kishor, G. P. Chaudhari, and S. K. Nath, “Slurry erosion of thermo-mechanically processed 13Cr4Ni stainless steel,” Tribology International, 93, (2016), pp. 50–57.
  49. S. Kumar and S. K. Nath, “Effect of heat input on impact toughness in transition temperature region of weld CGHAZ of a HY 85 steel,” Journal of Materials Processing Technology, 236, (2016), pp.216–224.
  50. S. Kumar and S. K. Nath, “Effect of Weld Thermal Cycles on Microstructures and Mechanical Properties in Simulated Heat Affected Zone of a HY 85 Steel,” Transactions of Indian Institute of  Metals, 70, (2016), pp.1–12.
  51. S. Kumar, S. K. Nath, and V. Kumar, “Continuous cooling transformation behavior in the weld coarse grained heat affected zone and mechanical properties of Nb-microalloyed and HY85 steels,” Materials and Design, 90, (2016), pp.177–184.
  52. S. Kumar, S. K. Nath, and V. Kumar, “Isothermal Transformation Behavior of A Low-Carbon HY 85 Steel,” Metallography, Microstructure and Analysis, 5, (2016), pp. 264–271.
  53. K. Mohan, J. A. Suresh, P. Ramu, and R. Jayaganthan, “Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment,” Journal of Materials Engineering and Performance ,25, (2016), pp.1–10.
  54. S. Nayak, B. Bhushan, R. Jayaganthan, P. Gopinath, R. D. Agarwal, and D. Lahiri, “Strengthening of Mg based alloy through grain refinement for orthopaedic application,” Journal of Mechanical Behaviour of Biomedical Materials, 59, (2016), pp. 57–70.
  55. R. Prakash, R. Jayaganthan, and D. Kaur, “Structural, corrosion and mechanical properties of sputtered deposited chromium tungsten nitride (Cr1-xWxN) nanocomposite thin films,” Advanced Material Letter, 7, (2016), pp. 723–729.
  56. S. K. Rajput, G. P. Chaudhari, and S. K. Nath, “Characterization of hot deformation behavior of a low carbon steel using processing maps, constitutive equations and Zener-Hollomon parameter,” Journal of Materials Processing Technology, 237, (2016), pp.113–125.
  57. K. K. Yogesha, A. Joshi, N. Kumar, and R. Jayaganthan, “Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy,” Materials Manufacturing Processes., 6914, (2016), pp.1–9.
  58. K. K. Yogesha, N. Kumar, A. Joshi, R. Jayaganthan, and S. K. Nath, “A Comparative Study on Tensile and Fracture Behavior of Al???Mg Alloy Processed Through Cryorolling and Cryo Groove Rolling,” Metallography, Microstructure and Analysis, 5, (2016), pp.251–263.
  59. B. Kishor, G. P. Chaudhari, and S. K. Nath, “Hot Deformation Characteristics of 13Cr-4Ni Stainless Steel Using Constitutive Equation and Processing Map,” Journal of Materials Engineering and Performance ,25, (2016), pp. 2651–2660.
  60. P. K. Ghosh, A. Patel, and K. Kumar, “Adhesive joining of copper using nano-filler composite adhesive,” Polymers, 87, (2016), pp. 159–169.
  61. K. Kumar, P. K. Ghosh, and A. Kumar, “Improving mechanical and thermal properties of TiO2-epoxy nanocomposite,” Composite Part B: Engineering, 97, (2016), pp.353–360.
  62. R. Kumar, R. Anant, P. K. Ghosh, A. Kumar, and B. P. Agrawal, “Influence of PC-GTAW Parameters on the Microstructural and Mechanical Properties of Thin AISI 1008 Steel Joints,” Journal of Materials Engineering and Performance, 25, (2016), pp.3756–3765.
  63. J. S. Binoj et al., “International Journal of Polymer Analysis and Optimization of short Indian Areca fruit husk fiber ( Areca catechu L .)– reinforced polymer composites for maximizing mechanical properties,” GPAC, 5341, (2016), pp.112–122
  64. S. Das, S. B. Roy, G. P. Chaudhari, and B. S. S. Daniel, “Microstructural evolution of as-cast Th-U alloys,” Progress in Nuclear Energy, 88, (2016), pp.285–296.

2017

[1]      P. Kumar, P. K. Kanaujia, G. Vijaya Prakash, A. Dewasi, I. Lahiri, and A. Mitra, “Growth of few- and multilayer graphene on different substrates using pulsed nanosecond Q-switched Nd:YAG laser,” Journal of Materials Science, 52, (2017), pp. 12295–12306.

[2]      B. P. Agrawal and P. K. Ghosh, “Characteristics of Extra Narrow Gap Weld of HSLA Steel Welded by Single-Seam per Layer Pulse Current GMA Weld Deposition,” Journal of Materials Engineering and Performance, 26, (2017), pp. 1365–1381.

[3]      D. Singh, R. Jayaganthan, P. Nageswara Rao, A. Kumar, and D. Venketeswarlu, “Effect of initial grain size on microstructure and mechanical behavior of cryorolled AA 5083,” Materials Today: Proceedings, 4, (2017), pp. 7609–7617.

[4]      R. Anant and P. K. Ghosh, “Advancement in narrow gap GMA weld joint of thick section of austenitic stainless steel to HSLA steel,” Materials Today: Proceedings, 4, (2017), pp. 10169–10173.

[5]      K. Basanth Kumar, K. K. Saxena, S. R. Dey, V. Pancholi, and A. Bhattacharjee, “Peak stress studies of hot compressed TiHy 600 alloy,” Materials Today: Proceedings, 4, (2017), pp. 7365–7374.

[6]      V. Verma and B. V. Manoj Kumar, “Synthesis, Microstructure and Mechanical Properties of Al2O3/ZrO2/CeO2Composites with Addition of Nickel and Titania Processed by Conventional Sintering,” Materials Today: Proceedings, 4, (2017), pp. 3062–3071.

[7]      Sandeep, V. Verma, U. Prakash, P. C. Tewari, and D. Khanduja, “Effect of quenching medium on microstructure and hardness of as sintered Fe-Cr-Mo-0.6C and Fe-Mo-0.6C alloy steel,” Materials Today: Proceedings, 4, (2017), pp. 459–464.

[8]      A. Kumar, P. K. Ghosh, K. L. Yadav, and K. Kumar, “Thermo-mechanical and anti-corrosive properties of MWCNT/epoxy nanocomposite fabricated by innovative dispersion technique,” Composites Part B: Engineering, 113, (2017), pp. 291–299.

[9]      N. Kumar, S. Goel, R. Jayaganthan, and H. G. Brokmeier, “Effect of grain boundary misorientaton, deformation temperature and AlFeMnSi-phase on fatigue life of 6082 Al alloy,” Materials Characterization, 124,(2017), pp. 229–240.

[10]    A. Joshi, K. K. Yogesha, and R. Jayaganthan, “Influence of cryorolling and followed by annealing on high cycle fatigue behavior of ultrafine grained Al 2014 alloy,” Materials Characterization, 127,(2017), pp. 253–271.

[11]    D. Fuloria, N. Kumar, R. Jayaganthan, S. K. Jha, and D. Srivastava, “An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-4,” Materials Characterization, 129, (2017), April, pp. 217–233.

[12]    D. Fuloria, N. Kumar, R. Jayaganthan, S. K. Jha, and D. Srivastava, “Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures,” Materials Characterization, 127, pp. 296–310.

[13]    K. K. saxena, S. K. jha, V. pancholi, G. P. chaudhari, D. srivastava, G. K. dey, and N. saibaba, “Role of activation energies of individual phases in two-phase range on constitutive equation of Zr–2.5Nb–0.5Cu alloy,” Transactions of Nonferrous Metals Society of China (English Edition), 27, (2017), pp. 172–183.

[14]    N. kumar, R. jayaganthan, and H. G. brokmeier, “Effect of deformation temperature on precipitation, microstructural evolution, mechanical and corrosion behavior of 6082 Al alloy,” Transactions of Nonferrous Metals Society of China (English Edition), 27, (2017), pp. 475–492.

[15]    J. S. Binoj, R. Edwin Raj, and B. S. S. Daniel, “Comprehensive characterization of industrially discarded fruit fiber, Tamarindus indica L. as a potential eco-friendly bio-reinforcement for polymer composite,” Journal of Cleaner Production, 142,(2017), pp. 1321–1331.

[16]    V. Bhardwaj, R. Chowdhury, and R. Jayaganthan, “Adhesion strength and nanomechanical characterization of ZnO thin films,” Journal of Materials Research, 32, (2017), pp. 1432–1443.

[17]    S. Chauhan, V. Verma, U. Prakash, P. C. Tewari, and D. Khanduja, “Analysis of powder metallurgy process parameters for mechanical properties of sintered Fe???Cr???Mo alloy steel,” Materials and Manufacturing Processes, 32, (2017), pp. 537–541.

[18]    P. Ranjan, R. Sarathi, E. Selvam, H. Suematsu, P. Selvam, and R. Jayaganthan, “Synthesis of γ-Alumina nanoparticles by wire-explosion process: Characterisation and formation mechanism,” International Conference on High Voltage Engineering and Power Systems, ICHVEPS 2017 - Proceeding, (2017), pp. 301–306.

[19]    N. Kumar, S. Kumar, S. K. Rajput, and S. K. Nath, “Modelling of flow stress and prediction of workability by processing map for hot compression of 43CrNi steel,” ISIJ International, 57, (2017), pp. 497–505.

[20]    S. Kumar and S. K. Nath, “Effect of Weld Thermal Cycles on Microstructures and Mechanical Properties in Simulated Heat Affected Zone of a HY 85 Steel,” Transactions of the Indian Institute of Metals, 70, (2017),  pp. 239–250.

 [22]   B. P. Agrawal and P. K. Ghosh, “Assembling of thick-section HSLA steel with one seam per layer multi-pass PC-GMA welding producing superior quality,” Journal of the Brazilian Society of Mechanical Sciences and Engineering, 39, (2017), pp. 5205–5218.

[23]    V. Balakrishnan, P. Roshan, S. Goel, R. Jayaganthan, and I. V. Singh, “Experimental and XFEM Simulation of Tensile and Fracture Behavior of Al 6061 Alloy Processed by Severe Plastic Deformation,” Metallography, Microstructure, and Analysis, 6, (2017), pp. 55–72.

[24]    V. Verma and B. V. Manoj Kumar, “Processing of TiCN–WC–Ni/Co Cermets via Conventional and Spark Plasma Sintering Technique,” Transactions of the Indian Institute of Metals, 70, (2017), pp. 843–853.

[25]    S. K. Chaurasia, U. Prakash, and V. Dabhade, “Effect of Phosphorus on Microstructure and Mechanical Properties of Iron-Based Alloys Processed Through Powder Forging,” Metallography, Microstructure, and Analysis, 6, (2017), pp. 561–568.

[26]    A. Rahman and R. Jayaganthan, “Synthesis, Characterization and Photocatalytic Studies of La, Dy-doped ZnO nanoparticles,” Transactions of the Indian Institute of Metals, 70, (2017), pp. 1063–1074.

[27]    D. Nayak, S. N. Sahu, and S. Mula, “Metallurgical Approach Towards Explaining Optimized EDM Process Parameters for Better Surface Integrity of AISI D2 Tool Steel,” Transactions of the Indian Institute of Metals, 70, (2017), pp. 1183–1191.

[28]    S. Chauhan, V. Verma, U. Prakash, P. C. Tewari, and D. Khanduja, “Studies on induction hardening of powder-metallurgy-processed Fe–Cr/Mo alloys,” International Journal of Minerals, Metallurgy, and Materials, 24, (2017), pp. 918–925.

[29]    K. K. Yogesha, A. Joshi, and R. Jayaganthan, “Fatigue Behavior of Ultrafine-Grained 5052 Al Alloy Processed Through Different Rolling Methods,” Journal of Materials Engineering and Performance, 26, (2017), pp. 2826–2836.

[30]    D. D. Mishra, P. Makkar, P. K. Rath, V. V. Dabhade, V. Agarwala, and R. C. Agarwala, “Effect of Ti Particle Size on the Reaction Kinetics and Densification of TiAl Intermetallics,” Transactions of the Indian Institute of Metals, 70, (2017), pp. 175–185.

[31]    D. Kumar, U. Prakash, V. V. Dabhade, K. Laha, and T. Sakthivel, “High yttria ferritic ODS steels through powder forging,” Journal of Nuclear Materials, 488,(2017), pp. 75–82, .

[32]    D. Kumar, U. Prakash, V. V. Dabhade, K. Laha, and T. Sakthivel, “Development of Oxide Dispersion Strengthened (ODS) Ferritic Steel Through Powder Forging,” Journal of Materials Engineering and Performance, 26, (2017), pp. 1817–1824.

[33]    S. Ghosh, A. K. Singh, S. Mula, P. Chanda, V. V. Mahashabde, and T. K. Roy, “Mechanical properties, formability and corrosion resistance of thermomechanically controlled processed Ti-Nb stabilized IF steel,” Materials Science and Engineering A, 684, (2017), pp. 22–36.

[34]    A. Sil, A. Kiran, A. P. Niranjana, and K. M. Knowles, “Sol-gel preparation of Zn-V-Mn-O thin films for low voltage varistor applications,” Ceramics International, 43, (2017), pp. 9616–9621.

 [36]   V. Verma and B. V. Manoj Kumar, “Tribological characteristics of conventionally sintered TiCN-WC-Ni/Co cermets against cemented carbide,” Ceramics International, 43, (2017), pp. 368–375.

[37]    R. Kumar, R. M. Kumar, D. Lahiri, and I. Lahiri, “Thermally reduced graphene oxide film on soda lime glass as transparent conducting electrode,” Surface and Coatings Technology, 309,(2017), pp. 931–937.

[38]    A. K. Tripathi, V. Jain, K. Saini, and I. Lahiri, “Field emission response from multi-walled carbon nanotubes grown on electrochemically engineered copper foil,” Materials Chemistry and Physics, 187,(2017) pp. 39–45.

[39]    R. Kumar, R. M. Kumar, P. Bera, S. Ariharan, D. Lahiri, and I. Lahiri, “Temperature-time dependent transmittance, sheet resistance and bonding energy of reduced graphene oxide on soda lime glass,” Applied Surface Science, 425,(2017), pp. 558–563.

[40]    H. Singh, P. B. Dheeraj, Y. P. Singh, G. Rathore, and M. Bhardwaj, “Electrodeposition of porous copper as a substrate for electrocatalytic material,” Journal of Electroanalytical Chemistry, 785,(2017) pp. 1–7.

[41]    A. P. Kumar, V. M. S. Muthaiah, and S. Mula, “Effect of Nb, Y and Zr on thermal stability of nanocrystalline Al-4.5 wt.% Cu alloy prepared by mechanical alloying,” Journal of Alloys and Compounds, 722,(2017), pp. 617–627.

[42]    B. K. K., K. K. Saxena, S. R. Dey, V. Pancholi, and A. Bhattacharjee, “Processing map-microstructure evolution correlation of hot compressed near alpha titanium alloy (TiHy 600),” Journal of Alloys and Compounds, 691, (2017), pp. 906–913.

[43]    A. Kumar, K. Pal, and S. Mula, “Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2% SiC micro- and nanocomposites by friction stir processing,” Journal of Manufacturing Processes, 30, (2017), pp. 1–13.

[44]    S. Saxena and A. Sil, “Role of calcination atmosphere in vanadium doped Li4Ti5O12for lithium ion battery anode material,” Materials Research Bulletin, 96, (2017), pp. 449–457.

[46]    R. Rana, S. Chen, A. Haldar, and S. Das, “Mechanical properties of a bainitic steel producible by hot rolling,” Archives of Metallurgy and Materials, 62, (2017), pp. 2331–2338.

[47]    R. Manoj Kumar, P. Gupta, S. K. Sharma, A. Mittal, M. Shekhar, V. Kumar, B. V. Manoj Kumar, P. Roy, and D. Lahiri, “Sustained drug release from surface modified UHMWPE for acetabular cup lining in total hip implant,” Materials Science and Engineering C, 77, (2017), pp. 649–661.

[48]    K. K. Saxena, V. Pancholi, S. K. Jha, G. P. Chaudhari, D. Srivastava, and G. K. Dey, “A novel approach to understand the deformation behavior in two phase region using processing map,” Journal of Alloys and Compounds, 706, (2017), pp. 511–519.

[49]    S. Kumar, P. K. Ghosh, and R. Kumar, “Surface modification of AISI 4340 steel by multi-pass TIG arcing process,” Journal of Materials Processing Technology, 249, (2017), pp. 394–406.

[50]    A. Raja and V. Pancholi, “Effect of friction stir processing on tensile and fracture behaviour of AZ91 alloy,” Journal of Materials Processing Technology, 248, (2017), pp. 8–17.

[51]    R. Anant and P. K. Ghosh, “Ultra-narrow gap welding of thick section of austenitic stainless steel to HSLA steel,” Journal of Materials Processing Technology, 239, (2017), pp. 210–221.

[52]    R. Kumar, P. K. Ghosh, and S. Kumar, “Thermal and metallurgical characteristics of surface modification of AISI 8620 steel produced by TIG arcing process,” Journal of Materials Processing Technology, 240, (2017), pp. 420–431.

[53]    A. Khandelwal, K. Mani, M. H. Karigerasi, and I. Lahiri, “Phosphorene – The two-dimensional black phosphorous: Properties, synthesis and applications,” Materials Science and Engineering B: Solid-State Materials for Advanced Technology, 221, (2017), pp. 17–34.

[54]    S. M. Dasharath, S. Ghosh, and S. Mula, “Effect of SFE on tensile and fatigue behavior of ultrafine grained Cu-Zn and Cu-Al alloys developed by cryo-rolling/forging,” Materials Science and Engineering A, 693, (2017), pp. 73–83.

[55]    R. Verma, A. Srinivasan, R. Jayaganthan, S. K. Nath, and S. Goel, “Studies on tensile behaviour and microstructural evolution of UFG Mg-4Zn-4Gd alloy processed through hot rolling,” Materials Science and Engineering A, 704, (2017), pp. 412–426.

[56]    S. M. Dasharath and S. Mula, “Improvement of mechanical properties and fracture toughness of low SFE Cu-Al alloy through microstructural modification by multiaxial cryoforging,” Materials Science and Engineering A, 690, (2017), pp. 393–404.

[57]    A. Bisht, M. Srivastava, R. M. Kumar, I. Lahiri, and D. Lahiri, “Strengthening mechanism in graphene nanoplatelets reinforced aluminum composite fabricated through spark plasma sintering,” Materials Science and Engineering A, 695, (2017), pp. 20–28.

[58]    S. Ghosh, S. Mula, and D. Kumar Mondal, “Development of ultrahigh strength cast-grade microalloyed steel by simple innovative heat treatment techniques for industrial applications,” Materials Science and Engineering A, 700, (2017), pp. 667–680.

[59]    S. S. L. Vendra, S. Goel, N. Kumar, and R. Jayaganthan, “A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature,” Materials Science and Engineering A, 686, (2017), pp. 82–92.

 [61]   H. Raj, S. Saxena, and A. Sil, “Improved electrochemical performance of Li4Ti5O12 by reducing rutile TiO2 phase impurity and particle size,” Materials Technology, 32, (2017), pp. 196–201.

[62]    A. Nieto, A. Bisht, D. Lahiri, C. Zhang, and A. Agarwal, “Graphene reinforced metal and ceramic matrix composites: a review,” International Materials Reviews, 62, (2017), pp. 241–302.

[63]    S. Das, S. Sinha, A. Lodh, A. R. Chintha, M. Krugla, and A. Haldar, “Hot-rolled and continuously cooled bainitic steel with good strength–elongation combination,” Materials Science and Technology, 33, (2017), 8, pp. 1026–1037.

[64]    A. Rahman and R. Jayaganthan, “Study of CoFe 2 O 4 /NiFe 2 O 4 nanocomposite ferrite film,” Surface Engineering, 33, (2017), pp. 810–815.

[65]    K. K. Saxena, V. Pancholi, G. P. Chaudhari, D. Srivastava, G. K. Dey, S. K. Jha, and N. Saibaba, “Hot Deformation Behaviour and Microstructural Evaluation of Zr-1Nb Alloy,” Materials Science Forum, 890, (2017), pp. 319–322.

[66]    A. V. Singhal, H. Charaya, and I. Lahiri, “Noble Metal Decorated Graphene-Based Gas Sensors and Their Fabrication: A Review,” Critical Reviews in Solid State and Materials Sciences, 42, (2017), pp. 499–526.

[67]    N. M. Barkoula, B. Alcock, N. O. Cabrera, and T. Peijs, “Fatigue properties of highly oriented polypropylene tapes and all-polypropylene composites,” Polymers and Polymer Composites, 16, (2017), (2017), pp. 101–113.

[68]    A. Kumar, S. K. Sharma, K. Pal, and S. Mula, “Effect of Process Parameters on Microstructural Evolution, Mechanical Properties and Corrosion Behavior of Friction Stir Processed Al 7075 Alloy,” Journal of Materials Engineering and Performance, 26, (2017), (2017), pp. 1122–1134.

[69]    K. K. Yogesha, A. Joshi, N. Kumar, and R. Jayaganthan, “Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy,” Materials and Manufacturing Processes, 32, (2017), pp. 1336–1344.

[70]    K. Shah, N. Balsara, S. Banerjee, M. Chintapalli, A. P. Cocco, W. K. S. Chiu, I. Lahiri, S. Martha, A. Mistry, P. P. Mukherjee, V. Ramadesigan, C. S. Sharma, V. R. Subramanian, S. Mitra, and A. Jain, “State of the Art and Future Research Needs for Multiscale Analysis of Li-Ion Cells,” Journal of Electrochemical Energy Conversion and Storage, 14, (2017), p. 20801.

[71]    V. Pancholi, A. Raja, and K. Rohit, “Deformation Behavior of Inhomogeneous Layered Microstructure,” Materials Science Forum, 879, (2017), pp. 1437–1442.

[72]    G. Kaur, K. Saini, A. K. Tripathi, V. Jain, D. Deva, and I. Lahiri, “Room temperature growth and field emission characteristics of CuO nanostructures,” Vacuum, 139, (2017), pp. 136–142.

 

2018

 

[1]      B. Kishor, G. P. Chaudhari, and S. K. Nath, “Slurry erosion behaviour of thermomechanically treated 16Cr5Ni stainless steel,” Tribology International, 119, (2018), pp. 411–418.

 

[2]      K. Kumar, A. Kumar, and P. K. Ghosh, “UDM enhanced physical and mechanical properties through the formation of nanocavities in an epoxy matrix,” Ultrasonics Sonochemistry,  40, (2018) , pp. 784–790.

[3]      S. Goel, N. Kumar, R. Jayaganthan, I. V. Singh, and D. Srivastava, “Role of shear localization in nanocrystallisation of zircaloy-2 processed by wire rolling at cryo temperature,” Materials Science and Engineering A, 718, (2018), pp. 111–122.

[4]      M. Krugla, R. Rana, and S. Das, “Ductile ultra high strength hot stamped steel obtained by Q&P treatments,” Materials Science and Technology, 34, (2018), pp. 268–281.

[5]      S. Jaiswal, R. M. Kumar, P. Gupta, M. Kumaraswamy, P. Roy, and D. Lahiri, “Mechanical, corrosion and biocompatibility behaviour of Mg-3Zn-HA biodegradable composites for orthopaedic fixture accessories,” Journal of the Mechanical Behavior of Biomedical Materials, 78, (2018), pp. 442–454.

[6]      A. Bisht, V. Kumar, L. H. Li, Y. Chen, A. Agarwal, and D. Lahiri, “Effect of warm rolling and annealing on the mechanical properties of aluminum composite reinforced with boron nitride nanotubes,” Materials Science and Engineering A, 710, (2018), pp. 366–373.

[8]      N. Kumar, S. Goel, R. Jayaganthan, and G. M. Owolabi, “The influence of metallurgical factors on low cycle fatigue behavior of ultra-fine grained 6082 Al alloy,” International Journal of Fatigue, 110, (2018), pp. 130–143.

[9]      K. K. Saxena, K. S. Suresh, R. V. Kulkarni, K. V. Mani Krishna, V. Pancholi, and D. Srivastava, “Hot deformation behavior of Zr-1Nb alloy in two-phase region –microstructure and mechanical properties,” Journal of Alloys and Compounds, 741, pp. 281–292.

[10]    M. S. Goyat, S. Rana, S. Halder, and P. K. Ghosh, “Facile fabrication of epoxy-TiO2nanocomposites: A critical analysis of TiO2impact on mechanical properties and toughening mechanisms,” Ultrasonics Sonochemistry, 40, (2018), pp. 861–873.

[11]    H. Raj and A. Sil, “Effect of carbon coating on electrochemical performance of LiFePO4 cathode material for Li-ion battery,” Ionics, 2018.

[12]    A. Kumar, K. Kumar, P. K. Ghosh, and K. L. Yadav, “MWCNT/TiO2hybrid nano filler toward high-performance epoxy composite,” Ultrasonics Sonochemistry, 41, (2018), pp. 37–46.

[13]    M. S. Goyat and P. K. Ghosh, “Impact of ultrasonic assisted triangular lattice like arranged dispersion of nanoparticles on physical and mechanical properties of epoxy-TiO2nanocomposites,” Ultrasonics Sonochemistry, 42, (2018) , pp. 141–154.

[14]    R. Gupta, G. P. Chaudhari, and B. S. S. Daniel, “Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition,” Composites Part B: Engineering, 140, (2018), pp. 27–34.

[15]    S. Chauhan, V. Verma, U. Prakash, P. C. Tewari, and D. Khanduja, “Influence of Sintering Temperature and Cooling Rate on Microstructure and Mechanical Properties of Pre-alloyed Fe–Cr–Mo Powder Metallurgy Steel,” Transactions of the Indian Institute of Metals, 71, (2018) , pp. 219–224.

 [16]   V. M. S. Muthaiah and S. Mula, “Influence of Cr and Y Addition on Microstructure, Mechanical Properties, and Corrosion Resistance of SPSed Fe-Based Alloys,” Metallurgical and Materials Transactions A: Physical Metallurgy and Materials Science,  49, (2018), pp. 990–1005.

[17]    A. Bisht, K. Dasgupta, and D. Lahiri, “Effect of graphene and CNT reinforcement on mechanical and thermomechanical behavior of epoxy—A comparative study,” Journal of Applied Polymer Science,135, (2018), pp. 1–11.

[18]    S. Gupta, P. Kucharczyk, S. Münstermann, and R. Jayaganthan, “Prestraining Induced Enhancement in the Fatigue Limit Obtained by Load Increasing Thermal Method for Metastable Austenitic Stainless Steel,” Steel Research International,  1700434, (2018), pp. 1–10.

[19] M. Krugla, R. Rana and S. Das,"Ductile ultra high strength hot stamped steel obtained by Q&P treatments", Materials Science and Technology34, (2018), pp. 268-281