Spotlight
Facilities
Head
Faculty
Coordinators and Dy-Coordinators
User Committees
Staff
Student Homepages
How to Reach Us
IITR Home
Instrument Status
Log Reports
FEI make Field-Emission Scanning Electron Microscope
About Instrument and its applications-
This center at IIT Roorkee has the FE-SEM QUANTA 200 FEG from FEI Netherlands. It is the advanced, flexible solution for current and future diagnostics applications. It has three imaging modes – high-vacuum, low-vacuum and E-SEM. It accommodates the widest range of samples of any SEM system. This facility is utilized by IIT Roorkee students as well as other university students and R&D companies and industries in the country. We have special EBSD attachment with this machine which is beneficial in studying the texture analysis of the samples. It is engineered to provide maximum data – imaging and microanalysis – from all specimens, with or without preparation.
 
General Information-
Make- FEI
Model- FE-SEM QUANTA 200 FEG
Year of Installation- 2006
 
Specification-
  • Resolution: <2nm @ 30kV-High vacuum –with SED
  • Magnification: 12X - 1000kX
  • Acceleration voltage: 200V- 30kV
  • Gun type: FEG with Schottky emitter
  • Max probe current: 100nA (2pA-110 nA)
  • Detectors: SE, BSE, EBSD, EDS
Sample Requirements-
Solid (Sample Thickness < 1cm)
 
Analytical Charges-
For Charges Information Click Below Link-
 
Procedure for Sample Submission-
For users of IIT Roorkee Only
Internal candidates have to first register themselves at following portal-
Obtain a Token ID after logging in to above portal and then submit application (which can be downloaded from below link) mentioning the token ID, registration no. along with other relevant details to the IIC office.
For Downloading application click here-
 
For users other than IIT Roorkee
The Application (duly forwarded by concerned department HOD/Guide) along with analytical charges (in the form of Demand Draft) mentioning all the relevant parameters related to analysis may be sent to the below mentioned address-
Head
Institute Instrumentation Centre
Indian Institute of Technology Roorkee
Roorkee-247667
 
Mode of Payment:
For users of IIT Roorkee Only
The payment may be made in advance (In Cash) at Institute Instrumentation Centre Office.
 
For users other than IIT Roorkee
The payment should be made in the form of a Demand Draft in favor of “Dean SRIC, IIT Roorkee”. The DD should be sent along with your application and Samples.
NOTE: The DD amount should include service tax as per GOI rules.
 
Coordinator
K.S Suresh
Assistant Prof. in Department of Maetallurgical and Materials Engineering
Tel:+91-1332-284868
E-mail: suresfmt@iitr.ac.in
 
Contact Person
Mr. Amit Kumar Sharma
Technical Officer
In-Charge
Tel: +91-1332-286272
E-mail: amit.mic2019@iitr.ac.in