Spotlight
Faculty Profiles
Student Homepages
Facilities
IITR Home
Forms
Prospective Faculty
Time Table
Ph.D. Admission
G. P. Chaudhari
G. P. Chaudhari Head Of Department g.chaudhari@mt.iitr.ac.in +91-1332-285524
Areas of Interest
  • Aqueous corrosion , Solidification processing, Ultra fine grained materials
Professional Background
FromToDesignationOrganisation
2018continuingProfessorIIT Roorkee
20122018Associate ProfessorIIT Roorkee
20062012Assistant ProfessorIIT Roorkee
19952006Lecturer in MetallurgyGovernment College of Engineering, Aurangabad
19941994EngineerFoseco India Limited
19911992Management Trainee- TechnicalBhilai Steel Plant, SAIL
Honors and Awards
AwardInstituteYear
Outstanding Teacher Award IIT Roorkee2018
Selected Life Member of Alpha, Epsilon, Lambda, for higher academic accomplishments and leadershipNational Graduate Honour Society, USA2004
Dr. Jakkiwar Memorial AwardVisvesvaraya National Institute of Technology, Nagpur India1990
Merit scholarshipsVNIT Nagpur1989, 1990
Educational Details
DegreeSubjectUniversityYear
Ph.D.Metallurgical and Materials EngineeringThe University of Alabama, USA2005
M. Tech.Process MetallurgyIndian Institute of Technology Bombay1994
B. E.Metallurgical EngineeringVisvesvaraya National Institute of Technology (formerly VRCE) Nagpur1991
Administrative Background
FromToDesignationOrganisationLevel
2019ongoingHead, Department of Metallurgical and Materials EngineeringIIT Roorkee
20122014Chairman, Department Academic Program CommitteeIIT Roorkee
20142015Vice-Chairman, GATE-JAM 2015IIT Roorkee
20142019Member, Advisory Committee, Institute Instrumentation CentreIIT Roorkee
20152018Member, Sponsored Research & Indl. Consultancy (SRIC) CommitteeIIT Roorkee
20152017Member, Advisory Committee, Continuing Education CentreIIT Roorkee
20142015Staff Advisor - Gardening, Hobbies ClubIIT Roorkee
Sponsored Research Projects
TopicFunding AgencyYear
Environment assisted cracking of naval grade aluminium alloysNRB, DRDO2018
Ultra refined plain carbon dual phase steels developed using innovative thermomechanical processing DST-BMWF 2011
Thermo-mechanically processed erosion resistant stainless steel for use in hydropower plants (Co-I)DST2011
Ultrasonic Processing of Magnesium Alloy MeltsSERC, DST2009
Multiaxial forging of low carbon steelsIIT Roorkee2008
Participation in seminars
NamePlaceSponsored ByDate
TMS 2020 Annual MeetingSan DiegoIIT Roorkee23-02-2020
THERMEC 2018ParisIIT Roorkee08-07-2018
SICE 2018HyderabadIIT Roorkee25-07-2018
Materials Science & Technology 2014PittsburghIIT Roorkee12-10-2014
TMS 2012 Annual MeetingOrlandoIIT Roorkee11-03-2012
TMS 2010 Annual MeetingSeattleIIT Roorkee14-02-2010
Memberships
  • TMS International (The Minerals, Metals & Materials Society), Member since 2002
  • IIM (Indian Institute of Metals), Life Member
  • NACE International, Member
Teaching Engagements
TitleCourse CodeClass NameSemester
Corrosion Science and TechnologyMT-302B. Tech.Spring
Mechanical behavior of MaterialsMT-303B. Tech.Autumn
Corrosion TestingMT536M. Tech.Spring
Electron MicroscopyMTN-533B. Tech. & M.Tech.Autumn
Materials CharacterizationMT507M. Tech.Autumn
PHDs Supervised
TopicScholar NameStatus of PHDRegistration Year
Development of ultrafine grained steels by multiaxial forging and their characterizationAditya Kumar PadapA2006
Severe Plastic Deformation of Magnesium Alloys by Accumulative Roll BondingH. Shivananda NayakaA2007
Combined slurry and cavitation erosion of heat treated martensitic stainless steelsAmarendra H.J.A2009
Ultrasonic processing of magnesium alloy meltsPramod BhingoleA2009
Microstructural, mechanical and thermophysical properties of Th-U alloysSantanu DasA2008
Thermomechanical processing of low carbon and microalloyed steelsSunil Kumar RajputA2011
Cavitation and slurry erosion of thermomechanically processed turbine grade steelsBrij KishorA2011
Thermomechanical processing and corrosion behavior of Fe-P alloys Yashwant MehtaA2012
Ultrasonic processing of aluminium alloy meltsNeeraj SrivastavaA2012
Thermo-mechanical processing of Zr-Nb alloyKuldeep SaxenaA2012
Corrosion behavior of surface engineered 316 stainless steelNitin KumarO2017
Tribology of borided stainless steelsNirupama MohanO2018
Corrosion of Al alloysAnkurO2018
Flow assisted line pipe corrosionLalit Kumar MeenaO2019
Visits to outside institutions
Institute VisitedPurpose of VisitDate
Lawrence Berkeley National Laboratory Professional interaction02-03-2020
Technical University Graz AustriaCollaborative research work01-06-2012
Institute for Materials Science and Welding, Graz University of Technology, AustriaCollaborative research work01-06-2011
Institute of Materials Science and Technology, Vienna University of Technology, ViennaCollaborative research work10-06-2011
Courses or Conferences Organised
Conference NameSponsored ByDate
Four days workshop on "Hands-on Training on Thermomechanical simulator"TEQIP17-07-2018
Short term course on "Advanced techniques in microstructural characterization"QIP29/05/2017
Hands on Training cum Workshop On “Electron Microscopy"- 1 weekTEQIP19-10-2015
One week short term course on "Advanced Techniques in Corrosion Testing and Protection of Materials"AICTE18-02-2013
Application of Thermomechanical Simulator in Advanced Materials ResearchDST04-02-2011
One week short term course on "Advanced Techniques in Microstructural Characterization"AICTE26-12-2011
National International Collaboration
TopicOrganisationLevel
Ultra refined plain carbon dual phase steels by novel thermomechanical processingInstitute for Materials Science and Welding, TU Graz AustriaRP
Books Authored
  1. Advances in Materials and Processing: Challenges and Opportunities, Editors: S.R. Meka and G.P. Chaudhari, Material Today Proceedings, Elsevier (2018).
  2. Advances in Materials and Processing: Challenges and Opportunities, Editors: B.S.S. Daniel and G.P. Chaudhari, Advanced Materials Research, Vol. 585, Trans Tech Publications Ltd. Switzerland (2012).
  3. Nanomaterials and Devices: Processing and Applications, Editors: S. Ray, S.K. Nath, A. Kumar, R.C. Agarwala, V. Agarwala, G.P. Chaudhari, B.S.S. Daniel, Trans Tech Publications Ltd. Switzerland (2009).
Refereed Journal Papers

2020

  • S.K. Rajput, Y. Mehta, G.P. Chaudhari, S.K. Nath, Optimized thermomechanical processing for fine-grained dual-phase microstructure using deformation-induced ferrite transformation, J. of Materials Engineering and Performance (2020). https://doi.org/10.1007/s11665-020-04965-w
  • N. Srivastava, G.P. Chaudhari, Grain refinement in ultrasonicated binary aluminium alloys, Journal of Crystal Growth  532 (2020) 125415
  • Nitin Kumar, G.P. Chaudhari, S.R. Meka, Investigation of low temperature liquid nitriding conditions for 316 stainless steel for improved mechanical and corrosion response, accepted , Trans. Indian Institute of Metals (2020) 73, 235–242.

2019

  • N. Srivastava, G. P. Chaudhari, Effect of ultrasonic treatment on the mechanical behaviour of Al–Ni alloys, Materials Science & Technology 35 (2019) 1239-1247.
  • Sumit Kumar, G.P. Chaudhari, S.K. Nath, Critical Conditions for Dynamic Recrystallization of Hot Deformed 1Cr -1Mo Rotor Steel, Materials Performance & Characterization 8 (5) (2019) 1032-1049.

2018

  • N. Srivastava, G.P. Chaudhari, Microstructural evolution and mechanical behavior of ultrasonically synthesized Al6061-nano alumina composites, Materials Science & Engineering A 724 (2018) 199-207.
  • Brij Kishor, G.P. Chaudhari, S.K. Nath, Slurry erosion behaviour of thermomechanically treated 16Cr5Ni stainless steel, Tribology International 119 (2018) 411–418.
  • R. Gupta, G.P. Chaudhari, B.S.S. Daniel, Strengthening mechanisms in ultrasonically processed aluminium matrix composite with in-situ Al3Ti by salt addition, Composites Part B 140 (2018) 27-34.
  • Y. Mehta, S.K. Rajput, G.P. Chaudhari, V.V. Dabhade, Dynamic recrystallization and grain refinement of Fe-P-C-Si and Fe-P-C-Si-N steels, J. Materials Engineering & Performance 27 (2018) 4770-4782.

2017

  • A. Khandelwal, K. Mani, N. Srivastava, R. Gupta, G.P. Chaudhari, Mechanical behavior of AZ31/Al2O3 magnesium alloy nanocomposites prepared using ultrasound assisted stir casting, Composites Part B 123 (2017) 64-73.
  • N. Srivastava, G.P. Chaudhari, M. Qian, Grain refinement of binary Al-Si, Al-Cu and Al-Ni alloys by ultrasonication, J. Materials Processing Technology 249 (2017) 367-378.

2016

  • S.V. Muley, A.N. Vidvans, G.P. Chaudhari, Sumit Udainiya, An assessment of ultra fine grained 316L stainless steel for implant applications, Acta Biomaterialia  30 (2016) 408–419.
  • Brij kishor, G.P. Chaudhari, S.K. Nath, Slurry erosion of thermo-mechanically processed 13Cr4Ni stainless steel, Tribology International 93 (2016) 50–57.
  • N. Srivastava, G.P. Chaudhari, Strengthening in Al alloy nano composites fabricated by ultrasound assisted solidification technique, Materials Science & Engineering A 651 (2016) 241-247.
  • G.P. Chaudhari, Corrosion of nanostructured and ultrafine grained metallic implant materials, 
    Materials Technology: Advanced Performance Materials 31 (2016) 812-817.
  • S.K. Rajput, G.P. Chaudhari, S.K. Nath, Characterization of hot deformation behavior of a low carbon steel using processing maps, constitutive equations and Zener-Hollomon parameter, J. Materials Processing Technology 237 (2016) 113–125.
  • S. Das, S. Kaity, R. Kumar, J. Banerjee, S.B. Roy, G.P. Chaudhari, B.S.S. Daniel, Characterization of microstructural, mechanical and thermophysical properties of Th-52U alloy, J. Nuclear Materials 480 (2016) 223-234.
  • S. Das, S.B. Roy, G.P. Chaudhari, B.S.S. Daniel, Microstructural evolution in as-cast Th-U alloys, Progress in Nuclear Energy 88 (2016) 285-296.
  • Y. Mehta, S.K. Rajput, V. Dabhade, G.P. Chaudhari, Physical simulation of hot deformation & microstructural evolution of Fe-0.05C-0.13P steel, J. Materials Engineering & Performance 25 (2016) 1376-1383.
  • Brijkishor, G.P. Chaudhari, S.K. Nath, Hot deformation characteristics of 13Cr-4Ni stainless steel using constitutive equation and processing map, J. Materials Engineering & Performance  25 (2016) 2651-2660.
2015
  • S. Das, R. Kumar, S. Kaity, S. Neogy, K.N. Hareendran, S.B. Roy, G.K. Dey, B.S.S. Daniel, G.P. Chaudhari, Characterization of microstructural, mechanical and thermal properties and ageing study of Th–3 wt % U alloy, Nuclear Engineering and Design 282 (2015) 116–125.
  • Y. Mehta, V.V. Dabhade, G.P. Chaudhari, Metallography of Fe-P-C and Fe-P-C-Si-N alloys, Metallography, Microstructure, and Analysis 4 (2015) 488-496.
  • S.D. Yadav, P.P. Bhingole, G.P. Chaudhari, S.K. Nath and C.Sommitsch, Hybrid processing of AZ91 Magnesium alloy/nano-Al2O3 composites, Key Engineering Materials 651-653 (2015) 783-788.

2014

  • Bhingole P.P., Chaudhari G.P., Nath, S.K., Processing, microstructure and properties of ultrasonically processed in situ MgO-Al2O3-MgAl2O4 dispersed magnesium alloy composites, 2014, Composites Part A: Applied Science and Manufacturing 66 (2014) 209-217.
  • Brij  Kishor, G P Chaudhari, S.K.  Nath, Cavitation erosion of thermomechanically processed 13/4 martensitic stainless steel, Wear 319 (2014) 150-159.
  • Rajput, S.K., Chaudhari, G.P., Nath, S.K., Physical Simulation of Hot Deformation of Low-Carbon Ti-Nb Microalloyed Steel and Microstructural Studies, 2014, J. Materials Engineering & Performance23 (2014) 2930-2942.
  • Kumar, H., Chaudhari, G.P., Creep behavior of AS41 alloy matrix nano-composites, 2014, Materials Science and Engineering A 607 (2014) 435-444.
  • Muley, S.V., Singh, S.P., Sinha, P., Bhingole, P.P., Chaudhari, G.P., Microstructural evolution in ultrasonically processed in situ AZ91 matrix composites and their mechanical and wear behavior, 2014, Materials & Design 53 (2014) 475-481.
  • Agarwal, N., Chaudhari, G.P., Nath, S.K., Slurry and cavitation erosion of HSLA steel processed by warm multidirectional forging and inter-critical annealing, Tribology International 70 (2014) 18-25.

2013

  • Rajput, S.K., Dikovits, M., Chaudhari, G.P., Poletti, C., Warchomicka, F., Pancholi, V., Nath, S.K., Physical simulation of hot deformation and microstructural evolution of AISI 1016 steel using processing maps, Materials Science & Engineering A 587 (2013) 291-300.

2012

  • Padap, A.K., Chaudhari, G.P., Pancholi, V., Nath, S.K., Microstructural evolution and mechanical behavior of warm multi-axially forged HSLA steel, Journal of Materials Science 47 (2012) 7894-7900.
  • Bhingole, P.P., Chaudhari, G.P., Synergy of nano carbon black inoculation and high intensity ultrasonic processing in cast magnesium alloys, 2012, Materials Science and Engineering A 556 (2012) 954-961.
  • Amarendra, H.J., Chaudhari, G.P., Nath, S.K., Synergy of cavitation and slurry erosion in the slurry pot tester, Wear, 290-291 (2012) 25-31.
  • Patel, B., Chaudhari, G.P., Bhingole, P.P., Microstructural evolution in ultrasonicated AS41 magnesium alloy, Materials Letters, 66 (2012) 335-338.

2011

  • Chaudhari, G.P., Padap, A.K., Behera, S., Nath, S.K., Processing, microstructure and corrosion behaviour of multi-axially forged low carbon steels, 2011, Corrosion Engineering Science & Technology, 46, 392-399.
  • Bhagavathi, L.R., Chaudhari, G.P., Nath, S.K., Mechanical and corrosion behavior of plain low carbon dual-phase steels, 2011, Materials & Design, 32, 433-440.

2010

  • Nath, S.K., Chaudhari, G.P., Singla, M., Effect of thermomechanical treatment on the microstructure and mechanical properties of an IF steel, 2010, J. Materials Engineering & Performance, 19, 1325-1329.
  • Padap, A.K., Chaudhari, G.P., Pancholi, V., Nath, S.K., Warm multiaxial forging of AISI 1016 steel, 2010, Materials and Design, 31, 3816-3824.
  • Padap, A.K., Chaudhari, G.P., Nath, S.K., Mechanical and dry sliding wear behavior of ultrafine-grained AISI 1024 steel processed using multiaxial forging, 2010, Journal of Materials Science, 45, 4837-4845.
  • Chaudhari, G.P., Acoff, V.L., Titanium aluminide sheets made using roll bonding and reaction annealing, 2010, Intermetallics, 18, 472-478.

2009

  • Padap, A.K., Chaudhari, G.P., Nath, S.K., Pancholi, V., Ultrafine-grained steel fabricated using warm multiaxial forging: Microstructure and mechanical properties, 2009, Materials Science & Engineering A, 527, 110-117.
  • Chaudhari, G.P., Acoff, V., Cold roll bonding of multi-layered bi-metal laminate composites, 2009, Composites Science and Technology, 69, 1667-1675.
Miscellaneous
  • , , , Consulting work- Corrosion: (1) ISGEC Heavy Engineering Ltd Yamunanagar Haryana (2) SJVN Limited Shimla. Failure investigation: (1) TIDC India, Laksar Haridwar, (2) NTPC, Jhajjar (3) Sterlite Technologies Limited Sidcul Haridwar. Welding: NML Jamshedpur/CPRI, Bangalore.
  • ** DIY: Low cost high precision Data Acquisition System devised at our Electrometallurgy & Corrosion Lab. http://www.iitr.ac.in/media/facspace/chaudfmt/LowCost highPrecision DAQ.pdf