1. Rathore, R., & Dvivedi A. Sonication of tool electrode for utilizing high discharge energy during ECDM. Materials and Manufacturing Processes, 2020, https://doi.org/10.1080/10426914.2020.1718699. (IF-3.35)
2. Arya, R. K., & Dvivedi, A. Investigations on quantification and replenishment of vaporized electrolyte during deep micro-holes drilling using pressurized flow-ECDM process. Journal of Materials Processing Technology, pp. 217-229, Vol. 266, 2019. (IF-4.178
3. Pawariya, K., Dvivedi, A., & Singh, T. On performance enhancement of electrochemical discharge trepanning (ECDT) process by sonication of tool electrode. Precision Engineering, pp. 8-19, Vol. 56, 2019. (IF-2.685)
4. Kumar, S., & Dvivedi, A. Effect of Tool Materials on Performance of Rotary Tool Micro-USM during Fabrication of Microchannels, Journal of the Brazilian Society of Mechanical Sciences and Engineering, pp. 1-16, Vol. 41:432, 2019. (IF-1.743)
5. Yadav, V. K., Kumar, P., & Dvivedi, A. Performance enhancement of rotary tool near-dry EDM of HSS by supplying oxygen gas in the dielectric medium. Materials and Manufacturing Processes, pp. 1832-1846, Vol. 34(16), 2019. (IF-3.35)
6. Singh, T., Dvivedi, A. & Rathore, R. Experimental investigations, empirical modeling and multi objective optimization of performance characteristics for ECDD with pressurized feeding method. Measurement, pp. 1-12, Vol. 149, 2019. (IF-2.791)
7. Singh, T., Dvivedi, A. & Arya, R. K. Fabrication of micro-slits using W-ECDM process with textured wire surface: An experimental investigation on kerf overcut reduction and straightness improvement. Precision Engineering, pp.211-223, Vol. 59, 2019. (IF-2.685)
8. Dhakar, K., Chaudhary, K., Dvivedi, A., & Bambalge, O. An environment-friendly and sustainable machining method: near-dry EDM. Materials and Manufacturing Processes, pp. 1307-1315, Vol. 34 (12), 2019. (IF-3.35)
9. Kumar, S., & Dvivedi, A. Micro-ultrasonic drilling of monocrystalline silicon: An experimental investigation on machined surface topography and optimization using User's preference rating based TOPSIS. Materials Science in Semiconductor Processing, Vol. 102, 2019. https://doi.org/10.1016/j.mssp.2019.104584. (IF-2.722)
10. Singh, T., Arya, R. K. & Dvivedi, A. Experimental investigation into rotary mode electrochemical discharge drilling (RM-ECDD) of metal matrix composites. Machining Science and Technology, pp. 1-32, 2019, DOI: 10.1080/10910344.2019.1636270. (IF-1.176)
11. Kumar, S., & Dvivedi, A. On machining of hard and brittle materials using rotary tool micro-ultrasonic drilling process. Materials and Manufacturing Processes, pp. 736-748, Vol. 34(7), 2019. (IF-3.35)
12. Addis, S., Dvivedi, A., & Beshah, B. Quality management as a tool for job satisfaction improvement in low-level technology organizations: the case of Ethiopia. Production Planning & Control, pp. 665-681, Vol. 30(8), 2019. (IF-3.34)
13. Yadav, V.K., Kumar, P., & Dvivedi, A. Effect of tool rotation in near-dry EDM process on machining characteristics of HSS. Materials and Manufacturing Processes, pp. 779-790, Vol. 34(7), 2019. (IF-3.35)
14. Jha, N. K., Singh, T., Dvivedi, A., & Rajesha, S. Experimental investigations into triplex hybrid process of GA-RDECDM during subtractive processing of MMC’s. Materials and Manufacturing Processes, pp. 243-255, Vol. 34(3), 2019. (IF-3.35)
15. Kumar, S., & Dvivedi, A. On effect of tool rotation on performance of rotary tool micro-ultrasonic machining. Materials and Manufacturing Processes, pp. 475-486, Vol. 34(5), 2019. (IF-3.35)
16. Filketu, S., Dvivedi, A., & Abebe, B. B. Decision-making on job satisfaction improvement programmes using fuzzy QFD model: a case study in Ethiopia. Total Quality Management & Business Excellence, pp. 1068-1091, Vol. 30 (9-10), 2019. (IF-2.181)
17. Kumar, S., & Dvivedi, A. Fabrication of microchannels using rotary tool micro-USM: An experimental investigation on tool wear reduction and form accuracy improvement. Journal of Manufacturing Processes, pp. 802-815, Vol. 32, 2018. (IF-3.462)
18. Singh, T., & Dvivedi, A. (2018). On performance evaluation of textured tools during micro-channeling with ECDM. Journal of Manufacturing Processes, pp. 699-713, Vol. 32, 2018. (IF-3.462)
19. Singh, T., & Dvivedi, A. On pressurized feeding approach for effective control on working gap in ECDM. Materials and Manufacturing Processes, pp. 462-473, Vol. 33(4), 2017. (IF-3.35)
20. Singh, S., Singh, I., & Dvivedi, A. Design and development of novel cost effective casting route for production of metal matrix composites (MMCs). International Journal of Cast Metals Research, pp. 356-364, Vol. 30(6), 2017. . (IF-0.978)
21. Debnath, K., Singh, I. & Dvivedi, A. On the analysis of force during secondary processing of natural fiber reinforced composite laminates. Polymer Composites, pp. 164-174, Vol. 38(1), 2017. (IF-2.268)
22. Singh, T. & Dvivedi, A. Developments in electrochemical discharge machining: A review on electrochemical discharge machining, process variants and their hybrid methods. International Journal of Machine Tools and Manufacture, pp. 1-13, Vol. 105, 2016. (IF-6.039)
23. Dhakar, K., Dvivedi, A., & Dhiman, A. Experimental investigation on effects of dielectric mediums in near-dry electric discharge machining. Journal of Mechanical Science and Technology, pp. 2179-2185, Vol. 30(5), 2016. (IF-1.221)
24. Cheema, M. S., Singh, P. K., Tyagi, O., Dvivedi, A. & Sharma, A. K. Tool wear and form accuracy in ultrasonically machined micro channels. Measurement, pp. 85-94, Vol. 81, 2016. (IF-2.791)
25. Gupta, P. K., Dvivedi, A. & Kumar, P. Effect of pulse duration on quality characteristics of blind hole drilled in glass by ECDM. Materials and Manufacturing Processes, pp. 1740-1768, Vol. 31(13), 2016. (IF-3.35)
26. Dhakar, K. & Dvivedi, A. Parametric evaluation on near-dry electric discharge machining. Materials and Manufacturing Processes, pp. 413-421, Vol. 31(4), 2016. (IF-3.35)
27. Gupta, P. K., Dvivedi, A. & Kumar, P. Developments on electrochemical discharge machining: A review of experimental investigations on tool electrode process parameters. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, pp. 910-92, Vol. 229(6), 2015. (IF-1.752)
28. Debnath, K., Singh, I. & Dvivedi, A. Rotary mode ultrasonic drilling of glass fiber-reinforced epoxy laminates. Journal of Composite Materials, pp. 949-963, Vol. 49(8), 2015. (IF-1.755)
29. Cheema, M. S., Dvivedi, A. & Sharma, A. K. Tool wear studies in fabrication of microchannels in ultrasonic micromachining. Ultrasonics, pp. 57–64, Vol. 57, 2015. (IF-2.598)
30. Pandey, H., Dhakar, K., Dvivedi, A. & Kumar, P. Parametric investigation and optimization of near-dry electrical discharge machining. Journal of Scientific and Industrial Research, pp. 508-511, Vol. 74(9), 2015. (IF-0.735)
31. C. Pandey, M. M. Mahapatra, Kumar, Pradeep, N. Saini, (2018), "Homogenization of P91 weldments using varying normalizing and tempering treatment, Materials Science and Engineering: A, Volume 710, 5 January 2018, Pages 86-101
32. C. Pandey, M. M. Mahapatra, Kumar, Pradeep, N. Saini, (2018), "Effect of strain rate and notch geometry on tensile properties and fracture mechanism of creep strength enhanced ferritic P91 steel", Journal of Nuclear Materials, Vol. 498, PP. 176-186
33. C. Pandey, M. M. Mahapatra, Kumar, Pradeep, N. Saini, (2018), "Dissimilar joining of CFEF steels using autogenous tungsten-inert gas welding and gas tungsten arc welding and their effect on ?-ferrite evolution and mechanical properties",Journal of Manufacturing Processes,Vol. 31, PP. 47-59
34. C. Pandey, M.M. Mahapatra, Kumar Pradeep, N. Saini, J.G. Thakre, R.S. Vidyarthy, H.K. Narang , (2018), "A brief study on d-ferrite evolution in dissimilar P91 and P92 steel joint and their effect on mechanical properties", Archives of Civil and Mechanical Engineering. doi:http://dx.doi.org/10.1016. pp 713-722
35. C. Pandey, M.M. Mahapatra, Kumar Pradeep, N. Saini (2018), "Comparative study of autogenous tungsten inert gas welding and tungsten arc welding with filler wire for dissimilar P91 and P92 steel weld joint", Materials Science & Engineering A. VOl. 712, pp. 720-737. doi:10.1016/j.msea.2017.12.039.
36. C. Pandey, M.M. Mahapatra, Kumar Pradeep, N. Saini (2018), "Some studies on P91 steel and their weldments", J. Alloy and Compounds Vol. 743, pp. 332-364.
37. C. Pandey, M.M. Mahapatra, Kumar Pradeep, N. Saini (2018), "Autogenous tungsten inert gas and gas tungsten arc with filler welding of dissimilar P91 and P92 steels", Journal of Pressure Vessel Technology. Vol. 140, 2 pp. 1-7. doi:10.1115/1.4039127.
38. Chaitanya Sharma, D.K. Dwivedi , Kumar Pradeep (2017), "Mechanical properties of friction stir welded armor grade Al-Zn-Mg alloy joints", Transactions of Nonferrous Metals Society of China, Volume 27, Issue 3, PP. 493-506 Elsevier
39. C. Pandey, M. M. Mahapatra, Kumar, Pradeep, N. Saini, A. Srivastava, (2017), "Microstructure and mechanical property relationship for different heat treatment and hydrogen level in multi-pass welded P91 steel joint", J. Manufacturing process 28(1), , 220-234
40. N. Saini, C. Pandey, M. M. Mahapatra, H. K. Narang, R. S. Mulik, Kumar, Pradeep, (2017), "A comparative study of ductile-brittle transition behavior and fractography of P91 and P92 steel", Eng. Fail. Anal. 81, 245-253
41. C. Pandey, M. M. Mahapatra, Kumar, Pradeep, N. Saini, (2017), "Nano-size particle evolution during heat treatment of P91 steel and their effect on microhardness", Transactions of the Indian Institute of Metals, DOI 10.1007/s12666-017-1215-6, pp 1-8
42. Amit Bansal, Apurbba Kumar Sharma, Kumar, Pradeep, (2017), "Galvanic corrosion behaviour of microwave welded and post-weld heat treated Inconel-718 joints", Journal of Materials Engineering and Performance, JMEPEG 26:2322-2330
43. Mohit Tyagi, Kumar Pradeep, Dinesh Kumar (2017), Modeling and Analysis of Barriers for Supply Chain Performance Measurement System. International Journal of Operational Research. 28(3), 392-414
44. Chandan Pandey, Anoj Giri, Manas Mohan Mahapatra, Kumar, Pradeep, (2017), "Characterization of Microstructure of HAZs in As-Welded and Service Condition of P91 Pipe Weldments", Metals and Materials International, Vol. 23, no. 1, pp. 148-162.
45. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Anoj Giri, (2017), "Microstructure characterization and Charpy toughness of P91 weldment for as-welded, PWHT and N&T heat treatment", Metals and Materials International, 23(5), 2017, 900-914
46. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Nitin Saini, (2017), "Effect of Normalization and Tempering on Microstructure and Mechanical Properties of V-Groove and Narrow-groove P91 Pipe Weldments", Material Science and Engineering A, Vol. 685, pp. 39-49.
47. Chandan Pandey, Nitin Saini, Manas Mohan Mahapatra, Kumar, Pradeep, (2017), "Study of the fracture surface morphology of impact and tensile tested cast and forged (C&F) Grade 91 steel at room temperature for different heat treatment regimes", Engineering Failure Analysis, Vol. 71, pp. 131-147.
48. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Nitin Saini, (2017), "Diffusible hydrogen level in deposited metal and their effect on tensile properties and flexural strength of P91 Steel", Journal of Engineering Maters and Technology, Vol. 139 , pp. 1-11.
49. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Nitin Saini, (2017), "Effect of creep phenomena on room-temperature tensile properties of cast & forged P91 steel", Engineering Failure Analysis, Vol. 79, pp. 385-396.
50. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Ravi Shankar Vidyarthy, Abhisek Srivastava, (2017), "Microstructure-based assessment of creep rupture behaviour of cast-forged P91 steel", Material Science and Engineering A, Vol. 695, pp. 291-301.
51. Chandan Pandey, Manas Mohan Mahapatra, Kumar, Pradeep, Nitin Saini, (2017), "Characterization of Cast and Forged (C&F) Gr. 91 Steel in Different Heat Treatment Condition", Transactions of Indian Institute of Metals, DOI 10.1007/s12666-017-1144-4.
52. Chandan Pandey, Harendra Kumar Narang , Nitin Saini, Manas Mohan Mahapatra, Kumar, Pradeep, (2017), "Microstructure and Transverse Shrinkage Stress Analysis in GTA Welds of P91 Steel Pipe", International Journal of Steel structure, Vol. 17, no. 2, pp. 763-774.
53. Chandan Pandey, Nitin Saini, Manas Mohan Mahapatra, Kumar, Pradeep, (2016), "Hydrogen induced cold cracking of creep resistant ferritic P91 steel for different diffusible hydrogen levels in deposited metal", International Journal of Hydrogen Energy, Vol. 41, no. 39, pp. 17695-17712.
54. Sachin Kumar Mangla, Kumar, Pradeep, Mukesh Kumar Barua, (2016), "A fuzzy DEMATEL Based Approach for Evaluation of Risks in Green Supply Chain, International Journal of Logistics Systems Management, Vol. 24, no. 2, pp. 224-243
55. Sachin Mangla, Kumar, Pradeep Barua, M. K (2016), "An integrated methodology of FTA and fuzzy AHP for risk assessment in green supply chain". International Journal of Operational Research, Vol. 25, No.1, pp. 77-99
56. Mohit Tyagi, Pradeep Kumar (2016). Contemplating Preference Ratings of Corporate Social Responsibility Practices for Supply Chain Performance System Implementation, International Journal of Social, Behavioral, Educational, Economic, Business and Industrial Engineering. 10(12), 3828-3831.
57. Deepak Kumar, Siddharth Jain, Mohit Tyagi, Pradeep Kumar (2018) Quantitative Assessment of Mutual Relationship of Issues experienced in Greening Supply Chain using ISM-Fuzzy MICMAC Approach. International Journal of Logistics Systems and Management. Vol 30, Issue 2, Pp 162-178
58. Sumeet Gandhi, Mangla SK, Kumar Pradeep, Kumar D.(2016), A Combined Approach Using AHP and DEMATEL for Evaluating Success Factors in Implementation of Green Supply Chain Management in Indian Manufacturing Industries, International Journal of Logistics Research and Applications, Vol 19, No. 6, pp 537-561
59. Amit Bansal, Apurbba Kumar Sharma, Kumar, Pradeep, (2016),"Investigations on microstructure and mechanical properties of the dissimilar weld between MS and SS-316 formed using microwave energy", Journal of Engineering manufacture (IMeche Part-B, (DOI: 10.1177/0954405414558694), 230(3): 439-448
60. G Mandaloi, S Singh, Kumar, Pradeep, K Pal, (2016), Effect on crystalline structure of AISI M2 steel using tungsten-thorium electrode through MRR, EWR, and surface finish, Measurement 90, 74-84
61. Amit Bansal, Apurbba Kumar Sharma, Kumar, Pradeep, Shantanu Das, (2016),"On microstructure and strength properties of microwave welded Inconel 718/ stainless steel (S-316L)", Proc. IMechE Part-L: Journal of Materials: Design and Applications. 230(5):939-948
62. Temesgen Berhanu, Kumar Pradeep, Inderdeep Singh, (2016), "A study about hole making in woven jute fabric-reinforced polymer composites", Proceedings of the Institution of Mechanical Engineers, Part L: Journal of Materials: Design and Applications (2016) 230(4)
63. G Mandaloi, S Singh, Kumar, Pradeep, K Pal, (2016), Effect on crystalline structure of AISI M2 steel using copper electrode through material removal rate, electrode wear rate and surface finish, , Measurement 61, 305-319
64. Amit Bansal, Apurbba Kumar Sharma, Kumar, Pradeep, Shantanu Das, (2016), "On microstructural and strength characterisation of microwave welded Inconel 718 joints at 2.45 GHz frequency", Kovove materialy - Metallic Materials. 54:1-9
65. Lautre, N.K., Sharma, A.K., Kumar Pradeep, Das, S. (2015), A simulation approach to material removal in microwave drilling of soda lime glass at 2.45 GHz, Applied Physics A
66. Amit Bansal, Apurbba Kumar Sharma, Kumar, Pradeep, Shantanu Das, (2015), "Structure property correlations in microwave joining of Inconel 718", The Journal of The Minerals, Metals & Materials Society (TMS). (DOI: 10.1007/s11837-015-1523-4), JOM, Vol.67, No. 9, pp 2087-2098
67. Sachin Kumar Mangla, Kumar, Pradeep, Mukesh Kumar Barua, (2015), "Prioritizing the Responses to Manage Risks in Green Supply Chain: an Indian Plastic Manufacturer Perspective. Sustainable Production and Consumption- Official Journal of the European Federation of Chemical Engineering Part E, 1 (1), 67- 86.
68. Gudipadu Venkatesh, A.K.Sharma, Kumar Pradeep, (2015) "On ultrasonic assisted abrasive flow machining of bevel gears, International Journal of Machine Tools and Manufacture, 89 (2015) 29-38.
69. Sachin Kumar Mangla, Kumar Pradeep, and Mukesh Kumar Barua (2015), Flexible Decision Modeling for Evaluating the Risks in Green Supply Chain Using Fuzzy AHP and IRP Methodologies. Global Journal of Flexible Systems Management, 16 (1), 19-35.
70. Mohit Tyagi, Kumar Pradeep, Dinesh Kumar (2015). Assessment of Critical Enablers for Flexible Supply Chain Performance Measurement System Using Fuzzy DEMATEL Approach. Global Journal of Flexible Systems Management. 16(2), 115-132.
71. Sachin Kumar Mangla, Kumar, Pradeep, Mukesh Kumar Barua, (2015), "Risk Analysis in Green Supply Chain using Fuzzy AHP Approach: a Case Study", Recycling Resources and Conservation 2015; Online at: (http://dx.doi.org/10.1016/j.resconrec.2015.01.001)., Vol. 104, 375-390
72. Temesgen Berhanu, Kumar Pradeep, Inderdeep Singh, (2015), Sliding behaviour of woven industrial hemp fabric reinforced thermoplastic polymer composites, International Journal of Plastics Technology 19 (2), 347-362
73. A K Sharma, G Venkatesh, S Rajesha, Kumar, Pradeep, (2015), Experimental investigations into ultrasonic-assisted abrasive flow machining (UAAFM) process, The International Journal of Advanced Manufacturing Technology 80 (1-4), 477-493
74. Lautre, N.K., Sharma, A.K., Kumar Pradeep, Das, S. (2015) "A photoelasticity approach for characterization of defects in microwave drilling of soda lime glass", Journal of Material Processing Technology, 225, pp: 151-161.
75. Lautre, N.K., Sharma, A.K., Das, S, Kumar Pradeep. (2015) "On crack control strategy in near-field microwave drilling of soda lime glass using precursor", Journal of Thermal Sciences and Engineering Applications, 7(4), pp: 041001-1-15. (Impact Factor: 1.5, ASME ).
76. Mohit Tyagi, Kumar Pradeep, Dinesh Kumar (2015). Parametric selection of alternatives to improve performance of green supply chain management system. Procedia Social and Behavioral Sciences, 189, 449-457.
77. Gandhi, Sumeet, Sachin Kumar Mangla, Kumar, Pradeep, Kumar, Dinesh, (2015), "Evaluating Factors in Implementation of Successful Green Supply Chain Management Using DEMATEL: A Case Study, International Strategic Management Review, 2015. (DOI 10.1016/j.ism.2015.05.001), vol. 3 (1-2), pp. 96-109
78. Mohit Tyagi, Kumar, Pradeep, Dinesh Kumar, (2015) "Analyzing CSR Issues for Supply Chain Performance System using Preference Rating Approach", Journal of Manufacturing Technology Management. VOL. 26(6), 830-852
79. Mohit Tyagi, Kumar, Pradeep, Dinesh Kumar, (2015) "Assessing CSR practices for supply chain performance system using fuzzy DEMATEL approach" International Journal of Logistics Systems and Management. VOL. 22(1), 77-102
80. Mohit Tyagi, Kumar, Pradeep,, Dinesh Kumar, (2015) "Analysis of interaction among the drivers of green supply chain management", International Journal of Business Performance and Supply Chain Modeling. 7(1),pp. 92-108
81. Mohit Tyagi, Kumar, Pradeep, Dinesh Kumar, (2015) "Permutation of fuzzy AHP and AHP methods to prioritizing the alternatives of SCP system", International Journal of Industrial Engineering: Theory, Applications and Practice, VOL 22(6), 729-752
82. Chaitanya Sharma, D.K. Dwivedi , Kumar Pradeep (2015), Influence of pre-weld temper conditions of base metal on microstructure and mechanical properties of friction stir weld joints of Al-Zn-Mg alloy AA7039. Journal of Material Science and Engineering A, Vol. 620, Issue 1, 2015, pp. 107-119.
83. Chaitanya Sharma, D.K. Dwivedi , Kumar Pradeep (2015), "Investigating the Influence of friction stir welding on microstructure, mechanical and corrosion behavior of Al-Zn-Mg aluminium alloy,", Engineering Review, Vol. 35, Issue 3, 2015, pp.267-274
84. Gudipadu Venkatesh, A.K.Sharma, Kumar, Pradeep, (2015), "Fine finishing of SiC microchannels using abrasive flow machining", Indian Journal of Engineering & Material Sciences, , pp. 297-306
1. Kumar, S., & Dvivedi, A. (2019). Parametric investigations and optimization of rotary tool micro-USM using Taguchi methodology, In 6th International Conference on Production and Industrial Engineering (CPIE-2019) NIT Jalandhar, Punjab.
2. Kumar, S., & Dvivedi, A. (2018). On Performance Evaluation of Helical Grooved Tool during Rotary Tool Micro-ultrasonic Machining. In 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai.
3. Arya, R. K., & Dvivedi, A. (2018). Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode. In 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai.
4. Singh, T., & Dvivedi, A. (2018). Experimental investigation on the effect of energy interaction duration during micro channeling with ECDM. In 7th International and 28th All India Manufacturing Technology Design and Research Conference (AIMTDR-2018), Anna University, Chennai.
5. R. Kumar, S. Kumar and A. Dvivedi (2017). Effect of tool geometry on performance of rotary tool micro-USM. International Conference on Nano-technology, Ideas, Innovations and Initiatives (ICN3I-2017), IIT Roorkee.
6. Kumar S., Dvivedi A. and Kumar Pradeep (2017), "On tool wear in rotary tool micro-ultrasonic machining," The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, Feb 26- Mar 2, 2017
7. S. Kumar and A. Dvivedi (2017). An ultrasonic micro-machining approach for fabrication of micro-molds. In 12th Uttarakhand State Science & Technology Congress 2017-18.
8. S. Kumar and A. Dvivedi (2017). Parametric effect on width overcut in rotary tool micro-ultrasonic machining. International Conference on Technology & Trust (ICTT-2017) Greater Noida Institute of Technology, Greater Noida.
9. S. Kumar and A. Dvivedi (2016). On comparative study of micro-ultrasonic drilling with and without tool rotation. In 4th International Conference on Production and Industrial Engineering (CPIE-2016) NIT Jalandhar, pp. 327-335.
10. Kumar, S., & Dvivedi, A. (2016). Investigations on Fabrication of Microchannels using Rotary Tool Micro-ultrasonic Machining. In 6th International and 27th All India Manufacturing Technology Design and Research Conference (AIMTDR-2016), pp. 444-447.
11. S. Kumar and A. Dvivedi (2016). Fabrication of 3D complex micro-features used in bio-medical applications. In 3rd International Conference on Nanotechnology for Better Living (NBL-2016) NIT Srinagar, pp. 255.
12. C. Pandey, M. M. Mahapatra, Kumar Pradeep, N. Saini, J. G. Thakre, (2017), Effect of welding process and PWHT on delta ferrite evolution in dissimilar P91 and P92 steel weld joint, Conference: International conference on Advances in Materials & Processing: Challenges & Opportunities (AMPCO), 2017, At MMED, IIT Roorkee.
13. Yadav V K, Kumar Pradeep and Dvivedi A, (2017), "Investigations on rotary tool near-dry electric discharge machining," The Minerals, Metals & Materials Society (TMS 2017), San Diego, California, Feb 26- Mar 2, 2017
14. Mohit Tyagi, Pradeep Kumar (2016). Contemplating Preference Ratings of Corporate Social Responsibility Practices for Supply Chain Performance System Implementation, 18th International Conference on Industrial Engineering and Management (ICIEM-2016), Holiday Inn, Wembley London, United Kingdom, 15-16th December.
15. Gupta P. K. and Kumar Pradeep. (2017) "Experimental Investigations on Electro Chemical Discharge Machining for Micro fabrication of Micro Channels on Glass", Proceedings of International Conference on Processing and Fabrication of Advanced Materials - XXV. 22-25 Jan 2017, The University of Auckland, New Zealand, Page No. 145-153
16. Deepak Kumar, Siddharth Jain, Mohit Tyagi, R. S. Walia, Kumar Pradeep (2016), Parametric Assessment of Issues of GSCM System Using Graph Theory based Preference Rating Approach. International conference on Big Data Analytics and Optimizing Supply Chains (POMS Chapter), S.P. Jain Institute of Management and Research Mumbai, 29-30th July 2016.
17. Deepak Kumar, Mohit Tyagi, Kumar Pradeep (2016), Assessment of Lean Manufacturing Strategies Using Interpretative Structural Modeling Approach. 2nd International Conference on Advances in Management & Decision Sciences, Gautam Buddha University, Greater Noida, 16-17th July 2016.
18. NK Lautre, AK Sharma, Kumar, Pradeep and S Das, (2016) "Comparison of Microwave assisted and Conventional method for drilling of perspex", The 6th International & 27th All India Manufacturing Technology, Design and Research Conference, AIMTDR 2016, College of Engineering, Pune, India, 16-18 December, 2016.
19. Yogesh Kumar Sharma, Sachin K Mangla, Pravin P. Patil, Surbhi Uniyal. Pradeep Kumar (2016). Structural model for challenges in sustainable food supply chain management in Indian context. IVth International Conference on Production & Industrial Engineering (CPIE-2016) Dr B R Ambedkar National Institute of Technology, Jalandhar December 19-21, 2016
20. Surbhi Uniyal, Sachin K Mangla, Pravin P. Patil, Yogesh Kumar Sharma, Pradeep Kumar (2016), Evaluating sustainable consumption and production challenges using FUZZY DEMATEL. IVth International Conference on Production & Industrial Engineering (CPIE-2016) Dr B R Ambedkar National Institute of Technology, Jalandhar December 19-21, 2016
21. Mangla S K., Luthra, S, Tyagi, M. Kumar, Pradeep, Barua MK. (2016). A mixed methodology to evaluate the competitiveness through green initiatives in supply chain: a case example in Indian scenario. E-Business and Supply Chain Competitiveness (EBSCC 2016), IIT Kharagpur, 12-14 February, 2016
1. Kumar S., Dvivedi A. (2020) On Performance Evaluation of Helical Grooved Tool During Rotary Tool Micro-ultrasonic Machining. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
2. Arya R.K., Dvivedi A. (2020) Enhancement in Machining Efficiency and Accuracy of ECDM Process Using Hollow Tool Electrode. In: Shunmugam M., Kanthababu M. (eds) Advances in Unconventional Machining and Composites. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
3. Ramver, Yadav V.K., Kumar P., Dvivedi A. (2020) Experimental Investigation on Surface Morphology of Micro-EDMed Ti-6Al-4 V Alloy. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore.
4. Yadav V.K., Ramver, Kumar P., Dvivedi A. (2020) Investigation on the Effect of Input Parameters on Surface Quality During Rotary Tool Near-Dry EDM. In: Parwani A., Ramkumar P. (eds) Recent Advances in Mechanical Infrastructure. Lecture Notes in Intelligent Transportation and Infrastructure. Springer, Singapore.
5. Singh T., Dvivedi A. (2019) Experimental Investigations on the Effect of Energy Interaction Durations During Micro-channeling with ECDM. In: Shunmugam M., Kanthababu M. (eds) Advances in Micro and Nano Manufacturing and Surface Engineering. Lecture Notes on Multidisciplinary Industrial Engineering. Springer, Singapore.
6. Ramver, Dvivedi A., Kumar P. (2019) On Improvement in Surface Integrity of µ-EDMed Ti–6Al–4V Alloy by µ-ECM Process. In: The Minerals, Metals & Materials Series (eds) TMS 2019 148th Annual Meeting & Exhibition Supplemental Proceedings. The Minerals, Metals & Materials Series. Springer, Cham.
7. Yadav V.K., Kumar P., Dvivedi A. (2017) Investigations on Rotary Tool Near-Dry Electric Discharge Machining. In: Wang S., Free M., Alam S., Zhang M., Taylor P. (eds) Applications of Process Engineering Principles in Materials Processing, Energy and Environmental Technologies. The Minerals, Metals & Materials Series. Springer, Cham.
8. Dhakar K., Dvivedi A. (2017) Dry and Near-Dry Electric Discharge Machining Processes. In: Gupta K. (eds) Advanced Manufacturing Technologies. Materials Forming, Machining and Tribology. Springer, Cham.
9. Kumar S., Dvivedi A., Kumar P. (2017) On Tool Wear in Rotary Tool Micro-Ultrasonic Machining. In: Meyers M. et al. (eds) Proceedings of the 3rd Pan American Materials Congress. The Minerals, Metals & Materials Series. Springer, Cham.
10. Contributed 9 chapters in a Book Entitled: FE:PM Industrial Engineering
Publisher: Research and Education Association, U.S.A
i. Facilities Design and Location
ii. Queuing Theory and Modeling
iii. Production, Planning and Scheduling
iv. Industrial Cost Analysis
v. Work Performance and Methods
vi. Manufacturing Processes
vii. Material Handling System Design
viii. Manufacturing System Design
ix. Simulation
11. Bhatti, R.S., Pradeep Kumar & Dinesh Kumar (2010). “A Fuzzy AHP model for 3PL Selection in Lead Logistics Provider Scenarios”, Chapter 18 of Enterprise Information Systems and Implementing IT Infrastructures: Challenges and Issues. Hershey, Pennsylvania, USA, IGI Global Publications, Sarthy. P. (Ed.) ISBN: 978-1-61520-625-4, DOI: 10.4018/978-1-61520-625-4.ch018, pp 261-277
12. Singh, S., Pradeep Kumar, (2010), “ Micro/Nano Finishing with Flexible Flow of Abrasives”, Chapter 6 of Introduction to Micromachining, Narosa Publishing, ISBN: 978-81-7319-915-8
13. Dvivedi, Akshay, Kumar, Pradeep and Singh, Inderdeep (2010), “Machining Characteristics of Metal Matrix Composite Using Electric Discharge Machining” , Manufacturing Technology Research. Volume 1, Nova Science Publishers, USA. 43-68. ISBN:978-1-61122-001-8
14. Srinath, M., Sharma, A. K., Kumar, Pradeep, (2011), “A Novel Method for Joining of Stainless Steel (SS-316) Through Microwave Energy”, The Minerals, Metals & Materials Society (TMS), Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118062173.ch35
15. Rajesha S., Sharma, A. K., Kumar, Pradeep, (2011), “Some Studies on Performance of a Natural Polymer Media for Abrasive Flow Machining”, The Minerals, Metals & Materials Society (TMS), Volume 3, John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118062173.ch41
16. Jha, P. K., Kant, S., Kumar, Pradeep, and Kumar, A. (2012) “Time Zone Analysis of F-Curve for Intermixing during Ladle Change-Over, in CFD Modeling and Simulation in Materials Processing” (eds L. Nastac, L. Zhang, B. G. Thomas, A. Sabau, N. El-Kaddah, A. C. Powell and H. Combeau), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118364697.ch40
17. Vishwakarma, Umesh, Dvivedi, Akshay and Kumar, Pradeep (2013), “Finite Element Modeling of Material Removal Rate in Powder Mixed Electrical Discharge Machining of Al-SiC Metal Matrix Composites”, in Materials Processing Fundamentals (eds L. Zhang, A. Allanore, C. Wang, J. A. Yurko and J. Crapps), John Wiley & Sons, Inc., Hoboken, NJ, USA. doi: 10.1002/9781118662199.ch17.
18. Kishore Debnath, Inderdeep Singh, Akshay Dvivedi, Kumar, Pradeep (2013), “Natural Fibre-Reinforced Polymer Composites for Wind Turbine Blades: Challenges and Opportunities”, Recent Advances in Composite Materials for Wind Turbine Blades, ISBN 978-0-9889190-0-6, ED. Dr. Brahim Attaf, Ch 2.