Water Flow Meter Calibration Facility

Water Flow Calibration Facility

Water Flow Calibration Facility Brochure

Brochure

Hydraulic Turbine R&D Laboratory

Department of Hydro Renewable Energy Indian Institute of Technology Roorkee

Hydraulic Turbine R&D Laboratory

Department of Hydro Renewable Energy Indian Institute of Technology Roorkee

Hydraulic Turbine R&D Laboratory

Department of Hydro Renewable Energy Indian Institute of Technology Roorkee

If it measures water flow, we can calibrate it.

The HT R&D laboratory having Hydro Turbine/Pump Model Testing test bed and Water Flow calibration Facility, established in 2018, has been providing technical consultancy, research, training, testing and calibration in flow measurement for our clients across the globe. Activities of Water Flow calibration Facility are centered around calibration and testing of flow products including flow meters, valves with water as medium of flow.

Prominent Features

Gravimetric Calibration method as per ISO 4185:1980

Comparison Calibration method using reference flow meters

Accredited as per ISO/IEC 17025:2017 accredited by National Accreditation Board for Testing and Calibration Laboratories (NABL)

Full compliance and audit readiness for your flow meter with complete and traceable calibration

Secure accurate and repeatable results for your devices over their entire life cycle by putting our expertise

The software is written in LabVIEW written by HT R&D lab as this has proved to be the most effective platform for calibration excellence and gives freedom to develop and introduce improvements at any time along with Software validation

Temperature control during calibration by provision of chiller plant during calibration

Ensuring constant flow-rate by use of transfer pumps to maintain inlet water level during calibration

Different size Flow-meter Calibration Loop

Specifications of the Water Flow calibration Facility

Flow Rate Range Flow Velocity Range Uncertainty in Volume Flow Rate

0.18% (ISO 4185)

Salient Technical Details

Measuring tank large capacity to collect 45 tons of water, on weighing system of 3 load cells 22 tons each

Measuring tank calibration by calibration tank with 2 ton load cell

Moving Flap Flow Diveter for higher accuracy and better control

Accurate diversion time measurement by 12-digit precision counter triggered by Photo switch

Flow calibration range 75 l/s to 907 l/s

Flow velocity calibration range 0.8m/s to 10 m/s

Two pumps driven by VFD motors in parallel/series or solo mode for stable flow in full range

Facility for inline installation of flow-meter from 100-350 NB

Contact:

Hydraulic Turbine R&D Laboratory, Department of Hydro and Renewable Energy, Indian Institute of Technology Roorkee Roorkee-247667, Uttarakhand, India

+91 1332 286133, 286134

hturbinelab@iitr.ac.in, hturbinelab@gmail.com, arun.kumar@hre.iitr.ac.in