1. Microwave applicators
1.1) 3 kW Microwave Applicator
Microwave Frequency: 2.45GHz
Maximum output power: 3 kW
Description: This applicator can be used to heat the materials for casting, cladding, joining and sintering purposes. Maximum power can be produced 3 kW at 2.45GHz frequency; processing temperature can be measured with the help of a built-in sensor inside the cavity.
1.2) Microwave Sintering Furnace
Input Power: 5 kVA
Voltage: 230 volts and current 20A
Microwave Frequency: 2.45GHz
Output Power: 1.45 kW
Application: This furnace is used to cast, join and sinter metals, ceramics, polymers and composites using microwave energy. This can produce 1.45 kW power at 2.45GHz frequency. It has built-in infrared sensor to measure the process temperature.
1.3) Domestic Microwave Applicators
Application: These are used in machining of the metals, glass and polymers.
2. Powder mixer and blender Voltage: 220/240 V
Min speed: 10RPM
Application: Suitable for dry mixing of products in powder form
Micro Vickers hardness Tester
Hardness test Range: 8HV-2900HV
Amplification of microscope: 100X for observation and 400X for measurement
Max. Height of specimen: 90mm
Application: To measure the microhardness value for the micro and thin specimens. This is also fit to measure the hardness for hard materials like glass, ceramics etc.
