PhD Awarded

Ph.D. Awarded

2022

S.no	Name of Student	Passing Year	Title of Research
1	Vaibhav Sharma	January,2022	Latral condition and aerothermal characterisation over ribbed wall of Internal Colling Passages
2	Mahesh Kumar Tiwari	January,2022	Experimental and numerical studies on compartment fires using diesel pool fires at various elevations and locations
3	Ketan Ajay	February,2022	A study on the channel heat-up during postulated loca
4	Vikash Kannojiya	March, 2022	Design of axial and centrifugal pump for lvad and the hemodynamics of a diseased heart with such pumpsin loop
5	Pratishtha	March, 2022	Activated flux tungsten inert gas welding of dissimilar steels
6	Darshan M B	March, 2022	Critical affairs of boiling heat transfer related to enhancement techniques and interfacial interactions
7	Ravindra Singh Bisht	April,2022	Design, dynamics, control and development of wall-climbing robot
8	Anuj Vats	April,2022	Investigation on shaped tube electronic drilling process
9	Patel Sachin Popatlal	May, 2022	An Investigation for the performance of cylinder roller bearing
10	Porbant Singh	May, 2022	Vibration signature analysis of roller bearing using soft computing techniques
11	Ankur Sharma	May, 2022	Development of ZrB2-Sic based hybrid composites with addition of Tic and mgo
12	Jayant Kumar	May, 2022	Joining behavior of natural fiber reinforced thermoset and thermoplastic composites
13	Tinku Kumar	May, 2022	An experimental and numerical investigation on the joining of aluminum alloy and steel
14	Abhishek Kumar	July, 2022	A study of conical hydrostatic/hybrid journal bearings
15	Nitin Dixit	July, 2022	Experimental investigation and modeling of ultrasonic assisted magnetic abrasive flow machining
16	Botcha Appalanaidu	July, 2022	Performance enhancement of electrochemical discharge drilling
17	Hiluf Reda	August, 2022	Learn manufacturing through VSM for ethiopian leather industry
18	Nikki rathore	August, 2022	Use of data-driven algorithms in real word vehicle routing problems
19	Rajesh Kumar Bhamu	August, 2022	Fault Diagnosis of large steam turbine blade using vibration responses
20	Pawan Kumar	August, 2022	Dynamics of piezo-based functionally graded plate
21	Sukrit Mittal	August, 2022	Machine learning based enhancements evolutionary multi-objective optimization
22	Shweta	August, 2022	Study and analysis of generic medicines storage and distribution issues in Indian pharmaceutical industries
23	Mohd Iqbal	September, 2022	Modeling and vibration control of periodic structures: Applications to railway track and piping system
24	Bikramjit Singh	September, 2022	Static and dynamic analysis of functionally graded gears
25	Shete Umakant Nagnathappa	September, 2022	Heat Transfer enhancement for the boiling of ozone safe refrigerants
26	Ankur Chaurasia	September, 2022	Static and dynamic characterization of h-BN reinforced polymer nanocomposites
27	Umeshankar Tripathi	September, 2022	Experimental investigation into wire arc based additive manufacturing of steel components
28	Nitish Kumar	September, 2022	Elastic wave bandgap tailoring in metamaterials: Numerical and experimental investigations
29	Aman Khurana	October, 2022	Electromechanical analysis of dielectric elastomer minimum energy structures (DEMES)
30	Hemant Sharma	October, 2022	Geometric modeling and deployment behavior analysis of conical and toroidal origami structures
31	Andesh kumar Tomar	October, 2022	A study on the performance of hybrid spherical journal bearings
32	Ankit Dev	October, 2022	Investigations on photovoltaic thermal solar collectors using different colling methods
33	Subodh Khullar	November, 2022	Numerical Study of Formation and mitigation of vortex on elbow draft tube
34	Sarvesh Saini	November, 2022	Modeling development and control of a bilateral master-slave robotic system aiming natural orifice transluminal endoscopic surgery
35	Vineet Kumar	November, 2022	Structural response of FGM plate with variable thickness
36	Subham Sharma	November, 2022	Sediment erosion of hydrodynamic machines
37	Anurag Deepak	December, 2022	Modelling and analysis of a reverse logistics decision support system for biomedical waste management
38	Shashikant Das	December, 2022	Study of Thermoregulatory mechanism sensation and performance of human body during commute in a hot thermal environment
39	Sandeep Kumar Singh	December, 2022	Atomistic simulations to study statics and dynamics behavior of multi-elemental alloys

2021

S.No	Name of Student	Passing Year	Title of Research
1	Mr.Vivek Parmar	2021	Diagnostics of sale Aligning Rolling Element Bearing
2	Mr. Krishnkant Sahu	2021	A study On the Performance of Slot Entry Hybrid Journal Bearings
3	Mr. Patil Ajeet Pandurang	2021	Diagnosis of Rolling Element Bearing using Vibration and Acoustic Emission Signals
4	Mr. Subrato Sarkar	2021	Structure Using Localizing Gradient Failure Analysis of Engineering Damage Method
5	Mr. Digvijay Singh	2021	Numerical Understanding of Breaking and Making Phenomena Around Gas Liquid Interfaces Producting Multiscale
6	Mr. Lokesh	2021	Interfacial Reconstruction of Taylor Bubble and Related Fluidic Behaviour in Vessel Empting
7	Mr. Uttam Singh Rajput	2021	High Order Shock Capturing Schemes for High Speed Compressible Flows
8	Mr. Avtar Singh	2021	Chemo mechanical Modelling of Fracture in heterogeneous cathode for lithium ION Battery
9	Mr. Rohit Kumar	2021	InvetInvestigation on Phwr Disassembled Fuel Channel During Server Accident Conditions
10	Mr. Ankit Sharma	2021	Experimental and Numerical Investigation on external and Internal Fine Spread in high rise Buildings
11	Mr. Pravajyoti Patra	2021	Nonlinear Dynamic Response Analysis of high speed Cylindrical Roller Bearings
12	Mr. Kulkarni Anup Shrikrishna	2021	Activated Flux Tungsten Inert Gas welding of Bimetallic and Tri metallic Joints
13	Ms. Nidhi Pal	2021	Cellulose Nanocrystals and Graphene Reinforced Polymeric Bionano Composites
14	Mr. Naveen Kumar	2021	Some Studies on Weldability and Erosion behaviour of Nitronic Steels
15	Mr. Kassahun Gashu Melese	2021	Experimental Investigation on Joining of Natural Fibres-based Composite Materials
16	Mr. Nagesh Babu Balam	2021	Transient Analysis of natural Convection Flow in Enclosure and its application to solar Collectors and Buildings
17	Mr. Tushar Roy	2021	Polymer Nano hybrids for proton Exchange membrane in cells
18	Mr. Sutar Sunil Suresh	2021	Investigation on Biomechanics of Blast Induced Traumatic Brain Injury Using Computation Models
19	Mr. Deepak Kumar	2021	Numerical study of Natural Convection in Rectangular cavity filled with Nano Fluid Under Magnetic Field
20	Mr. Rajesh Govindan	2021	Dynamics of human body exposed to low Frequency Vibration During Space Flight
21	Mr. Mohit Goel	2021	Molecular dynamics study of effects of defects and Geometry on Static and Dynamic Mechanics Behaviours of carbon nanotube
22	Mr. Sanjay Singh Samant	2021	A study of Mechanical Fracture and fatigue behaviour of Modified GCR-1Mo Steel
23	Mr. Siddappa P.G	2021	Experimental Estimation of thermal Contact Conductance at cryogenics Temperature and Numerical Modelling
24	Mr. Shaik Mozammil	2021	Synthesis Characterization and Modelling studies on In-Situ Tib2 Reinforced Aluminium Matrix Composites
25	Mr. Vibhuti Bhushan Pandey	2021	Crack Initiation and Propagation using Damage Mechanics and fix under creep Fatigue Environment
26	Mr.Farhan Ahmad Shamim	2021	Development and Parametric Investigation of Near-dry Wire ECDN Process
27	Mr. Jimmy Karloopia	2021	Some Studies on Synthesis and Characterization of in-situ AI-12% Si-Tib2 Metal Matrix Composites
28	Mr. Ranjeet Singh Rathore	2021	Investigation on Ultrasonic Assisted Electro Chemical Discharge Machining in Magnetic process
29	Mr. Bharat Bhushan Sharma	2021	Atomistic Models of Study Mechanical and Fracture Behavior dry and water Submerged h-Bn Nano Sheets
30	Mr. Ratnadeep Nath	2021	Double Diffusive mixed Convection of Nano Fluid in a Backward Facing Step channel

2020

S.No	Name of Student	Passing Year	Title of Research
1	Mr. Aditya Kumar	2020	Natural Convection in magnetic Nano fluids
2	Mr. T. Sudhakar	2020	Understanding interfacial Evolution of a Taylor drop in Liquid Filled Pipe Junction Using Lattice Boltzmann
3	Mr. Prashant Tiwari	2020	Automated Health State Assessment of Rolling Element Bearings
4	Mr. Sanjay Kumar	2020	Enhancing the properties of wax pattern and permeability/Strength of ceramic Shell in Investment Casting Process
5	Mr. Gaurav Kumar	2020	Microwave Drilling of Borosilicate Glass
6	Ms. Harpreet Kaur Aasi	2020	Investigation on Three Fluid Compact Plate Fin Heat Exchanger
7	Mr. Manoj Kumar	2020	Solid Desiccant Vapor Compression Hybrid Colling System with Condenser Exhaust Recovery
8	Mr. Manish Kumar	2020	Fatigue and Creep Crack Growth Analysis Using X fam
9	Mr. Sunil Kumar Singh	2020	Numerical Simulation of fracture Mechanics Problems Using Xiga
10	Mr. Geleta Fekadu Daba	2020	Study of Liquid Desiccant Air Conditioning System Marquise Shaped Channel Solar Collector
11	Mr. Tarikayehu Amanuel Untisso	2020	Thermohydraulic Performance of Three-Fluid Tubular Heat Exchanger Using Nano fluids: Experimental and Numerical Investigations
12	Mr. Sunil SInhmar	2020	Mechanical Properties and Corrosion Behavior of FSW Joints of Aluminum Alloys
13	Mr. Sujith S.V	2020	Synthesis and Fabrication of Al-Zn-Tic In situ Metal Matrix Composites
14	Mr. Shantanu Kumar Das	2020	Ontology Based Approach for Assembly Variant Design Using Liaisons
15	Mr. Shesh Narayan Dhurandhar	2020	Development of Flow and Heat Transfer Models in Hypersonic Rarefied Gas Dynamics
16	Mr. Semegn Cheneke Lemessa	2020	Development of TiB2/Y2O3 Reinforced AA2024 Matrix Composites with Improved Mechanical and wear Properties Through Semi-Solid Metal Casting
17	Mr. Manish Kumar Gupta	2020	Manufacturability Evaluation of Prismatic Parts
18	Mr. Jayant Gopal Thakare	2020	Performance Study and Life Prediction model for Coating on Heat Resistant Steels
19	Mr. Nitin Saini	2020	-
20	Mr. Singh Ankit Rajkumar	2020	-
21	Mr. Ujendra kumar Komal	May,2020	Processing Techniques and Degradation Behavior of sustainable polymeric Composites
22	Rajendra Kumar Arya	May,2020	Development and Investigation on Pressurized flow ECDM Process

2019

S.No	Name of Student	Passing Year	Title of Research
1	ANKIT RAJKUMAR SINGH	2019	SINGLE AND MULTIPLE CHANNEL SAGGING STUDY UNDER SEVERE HEAT-UP-CONDITIONS.
2.	DIVYA SINGH	2019	MOLECULAR DYNAMICS BASED SIMULATIONS TO INVESTIGATE THE EFFECT OF RADIATION DAMAGE ON ZR AND ZR-NB ALLOYS.
3.	RAHUL TARODIYA	2019	PERFORMANCE AND WEAR CHARACTERISTICS OF A CENTRIFUGAL SLORRY PUMP HANLING SOLID-LIQUID MIXTURES.
4.	GAIKWAD SHARAD VASANTRAO	2019	PERFORMANCE STUDY OF TREPANNING TOOL FOR DEEP ANNULAR GROOVING.
5.	SANDEEP KUMAR	2019	PERFORMANCE ANALYSIS OF ROTARY TOOL MICRO-USM PROCESS.
6.	ANKIT SAXENA	2019	FABRICATION AND ANALYSIS OF AN ARTIFICIAL HUMAN HIP JOINT FOR SQUAT POSTURE.
7.	SACHIN BALSARA	2019	AN ASSESSMENT OF CLIMATE CHANGE MITIGATION STRATEGIES OF THE INDIAN CEMENT INDUSTRY.
8.	VITALRAM RAYANKULA	2019	INVERSE KINEMATICS CONTROL AND PATH PLANNING OF MOBILE MANIPULATOR.
9.	KHYATI TAMTA	2019	REDUCTION OF SURFACE ROUGHNESS, SHELL CRACKING AND GAS POROSITY DEFECTS IN INVESTMENT CASTING PROCESS.
10.	TARLOCHAN SINGH	2019	EXPERIMENTAL INVESTIGATIONS FOR PERFORMANCE ENHANCEMENT OF ECDM PROCESS.
11.	VINEET KUMAR YADAV	2019	INVESTIGATIONS ON ROTARY TOOL NEAR-DRY ELECTRICAL DISCHARGE MACHINING PROCESS.
12.	ANKITA MAITY	2019	DEVELOPMENT OF PARALLEL NAVIER-STOKES SOLVER FOR LES OF FLOW OVER MARINE TURBINE.
13.	VEENA CHAUDHARY	2019	EXERGY ANALYSIS OF DIESEL ENGINE FUELLED WITH BIODIESEL.
14.	MANIK BANSAL	2019	A COMPUTATIONALLY EFFICIENT XFEM BASED STOCHASTIC MULTISCALE FRAMEWORK FOR THE ANALYSIS OF HETEROGENEOUS MATERIALS.
15.	JADHAV SURESH GOPINATH	2019	A STUDY OF LUBRICATION BEHAVIOUR OF NON-CONFORMAL EHL CONTACTS.
16.	SIMRANJET SINGH	2019	STATIC AND DYNAMIC ANALYSIS OF SANDWICH FUNCTIONALLY GRADED MATERIAL PLATE.
17.	ATUL KUMAR SHARMA	2019	FINITE ELEMENT ANALYSIS OF INHOMOGENEOUSLY DEFORMING DIELECTRIC ELASTOMER ACTUATORS.
18.	MANISH KUMAR LILA	2019	PROCESSING OF SHORT NATURAL FIBER REINFORCED POLYMER.
19.	ANJANA N. PRAJAPATI	2019	HEAT TRANSFER CHARACTERISTICS OF MATRIX COOLING CHANNELS USING LIQUID CRYSTAL THERMOGRAPHY.
20.	VIVEK KUMAR	2019	A STUDY OF HYDROSTATIC/HYBRID THRUST PAD BEARINGS CONSIDERING NON-LINEAR BEHAVIOUR OF LUBRICANTS.
21.	CHANDAN SWARROP MEENA	2019	INVESTIGATION OF BOILING OVER CYLINDRICAL SURFACES AND INTERACTION BETWEEN NEIGHBORING SITES.
22.	DUNGALI SHREEHARI	2019	DEVELOPMENT OF MICROCHANNELS BY MICRO-USM ON SILICON WAFER FOR HEAT TRANFER APPLICATIONS.
23.	DHEERAJ CHANDRA	2019	STUDY OF VACCINE SUPPLY CHAIN FOR SUSTAINABLE DEVELOPMENT OF CHILD IMMUNIZATION PROGRAM IN INDIA.
24.	ANAND KUMAR SOLANKI	2019	INVESTIGATIONS ON THE CONDENSATION OF REFRIGERANTS INSIDE A HELICAL COILED TUBE.
25.	ROSHAN UDARAM PATIL	2019	FAILURE ANALYSIS OF BRITTLE MATERIALS USING MULTISCALE PHASE FIELD METHOD.
26.	GAURAV SHARMA	2019	STUDIES ON METALLURGICAL AND MECHANICAL BEHAVIOR OF DIFFUSTION BONDED STEEL JOINTS.
27.	SATISH KUMAR	2019	ACTIVE DYNAMIC ANALYSIS AND CONTROL OF SPACE BASED ADAPTIVE MEMBRANE STRUCTURES.

2018

SL.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	RAVI SHANKAR VIDHYARTHI	2018	STUDIES ON ACTIVATED FLUX GAS TUNGSTEN ARC WELDED JOINTS OF STEELS.
2	LOKESH KUMAR?	2018	MODELING OF CARBON COMPLIANT SUPPLY CHAIN NETWORK FOR TYRE REMANUFACTURING INDUSTRY.
3	RITURAJ SINGH	2018	IMPROVED MLPG METHOD FOR LARGE SCALE HEAT TRANSFER PROBLEM.
4	CHIRRA SRICHARAN	2018	SCF STUDY UNDER SALES PROMOTIONS IN AN AUTOMOBILE INDUSTRY.
5	RAJESH KUMAR	2018	COMBUSTION ANALYSIS OF WASTE-OIL BASED BIODIESEL FUELED DI DIESEL ENGINE.
6	VINOD MANIKRAO NISTANE	2018	PROGNOSTICS OF ROLLING ELEMENT BEARINGS USING SOFT COMPUTING TECHNIQUES.
7	DEEPAK MEHRA?	2018	MANUFACTURABILITY OF IN-SITU TIC REINFORCED MAGNESIUM METAL MATRIX COMPOSITE.
8	AKHAND RAI	2018	CONDITION ASSESSMENT AND RESIDUAL LIFE PREDICTION OF ROLLING ELEMENT BEARINGS.
9	NITESH DUTT	2018	HEAT UP AND COOLING STUDIES OF DEBRIS OF IPHWR.
10	PARMOD KUMAR?	2018	STUDY OF ENTRAINMENT MECHANISMS USING MULTI-SCALE SIMULATIONS AND OPTICAL SENSORS.
11	CHANDRA BAHADUR KHATRI	2018	A STUDY OF NON-RECESSED HYBRID JOURNAL BEARINGS WITH TEXTURED SURFACES.
12	AVINASH CHAUDHARY	2018	STUDIES ON HYDROCARBON FUEL FIRES IN A COMPARTMENT.
13	RADHA RAMAN MISHRA	2018	INVESTIGATIONS ON IN-SITU MICROWAVE CASTING OF METALLIC MATERIALS.
14	DUBBA SANTOSH KUMAR	2018	AN EXPERIMENTAL STUDY ON THE FLOW OF REFRIGERANTS THROUGH A CAPILLARY TUBE.
15	MUKESH SHARMA	2018	STUDIES ON FUEL BUNDLE HEAT-UP UNDER FULLY VOIDED CONDITION DURING LOCA IN AN INDIAN PHWR.
16	ABHISHEK MALIK	2018	FLOW CONTROL AND HEAT TRANSFER ENHANCEMENT OVER A SURAFCE MOUNTED OBSTCALE USING SYNTHETIC JET.
17	SISAY ADDIS	2018	ANALYZING JOB SATISFACTION BY QUALITY MANAGEMENT FOR ETHIOPIAN LEATHER INDUSTRY.
18	CHANDAN PANDEY?	2018	SOME STUDIES ON THE EFFECT OF HEAT TREATMENT AND DIFFUSIBLE HYDROGEN ON P91 WELDS.
19	NAVEEN SHARMA	2018	INVESTIGATION ON AEROTHERMAL CHARACTERISTICS OF SURFACE MOUNTED TURBULENCE PROMOTERS.
20	RAJESH KUMAR	2018	EFFECT OF FUNCTIONALIZATION AND DEFECT ENGINEERING ON THE PROPERITES OF H-BN / NANOCOMPOSITE.
21	SURYA KUMAR	2018	A NOVEL APPROACH OF EVALUATING THERMAL CONTACT CONDUCTANCE USING LIQUID CRYSTAL THERMOGRAPHY.
22	MANOJ KUMAR	2018	MODELLING AND ANALYSIS OF GREEN LOGISTICS SYSTEMS FOR CLOSED LOOP PERISHABLE PRODUCTS.
23	PRAKASH KUMAR	2018	MODELLING OF HUMAN INDUCED FORCE ON STRUCTURES.
24	P. SUDHKAR RAO	2018	STUDIES ON ELECTRO CHEMICAL HONING OF EXTERNAL CYLINDRICAL SURFACES.
25	RAVI SHANKER VIDYARTHY	2018	STUDIES ON ACTIVATED FLUX GAS TUNGSTEN ARC WELDED JOINTS OF STEELS.

2017

S.no	NAME	PASSING YEAR	TITLE OF RESEARCH
1	MR. VINAY PANWAR	2017	USE OF DIFFERENT GRAPHENE- DERIVATIVES TO PREPARE HIGH PERFORMANCE POLYMERIC COMPOSITES.
2	AMBRISH MAURYA	2017	INVESTIGATION OF IN MOLD ELECTROMAGNETIC STIRRING PROCESS IN CONTINUOUS CASTING MOLD.
3	MR. RAJASHEKHRAN	2017	AN ATOMISTIC STUDY ON DEFECT ENGINEERING TO TAILOR MECHANICAL PROPERTIES OF GRAPHENE.
4	VIKAS VERMA	2017	STUDY OF THERMAL PERFORMANCE OF A SOLAR ASSISTED GROUNG SOURCE HEAT PUMP SYSTEM.
5	DEEPAK KHURANA	2017	STUDY OF THERMAL PROPERTIES, FORCED CONVECTION & PRESSURE DROP IN AL2O3 & TIO2
6	MR. PASHAM NITHISH REDDY	2017	STUDY OF DOUBLE DIFFUSIVE CONVECTION IN ENCLOSURES.
7	MR. NAVRATTAN	2017	EXPERIMENTAL INVESTIGATIONS INTO TRAVELLING WIRE ELECTROCHEMICAL SPARK MACHINING PROCESS.
8	MR. RAHUL GOYAL	2017	FLOW FIELD INVESTIGATIONS ON A FRANCIS TURBINE MODEL DURING STEADY AND TRANSIENT OPERATIONS.
9	RAJENDRA KUMAR	2017	ENHANCEMENT IN THE DYNAMIC PERFORMANCE OF MEMS THROUGH OPTIMIZATION OF WAVEFORM AND GEOMETRY.
10	MR. SAURABH CHAITANYA	2017	STUDIES ON SHORT FIBER REINFORCED BIOCOMPOSITES.
11	MR DHARMENDRA JAIN	2017	INFLUENCE OF GEOMETRIC IMPERFECTIONS OF JOURNAL IN NON-CIRCULAR MULTIRECESS HYBRID JOURNAL BEARINGS.
12	MR. ASHOK KUMAR DEWANGAN	2017	ENHANCEMENT OF HEAT TRANSFER DURING POOL BOILING OF REFRIGERANTS.
13	MR. ANOJ GIRI	2017	SOME STUDIES ON NEAR SURFACE AND THROUGH THICKNESS RESIDUAL STRESS IN STAINLESS STEEL WELDS.
14	MR. SHEDBALE AMIT SUBHASH	2017	SIMULATION OF INDENTATION, DAMAGE AND CRACK GROWTH USING COUPLED FE-EFG APPROACH.
15	MR. KAMAL KUMAR	2017	SOME STUDIES ON SCHEDULING OF RECONFIGURABLE MANUFACTURING SYSTEM.
16	MR. SUBHASH SINGH	2017	SPECIALITY ALUMINIUM MMCS WITH UNMODIFIED AND MODIFIED SIC FOR HIGH PERFORMANCE APPLICATION.
17	MR. JANI DILIP BATUKRAY	2017	PERFORMANCE STUDY OF A SOLID-DESICCANT VAPOR COMPRESSION HYBRID AIR-CONDITIONING SYSTEM.
18	MR. SHIVRAMAN	2017	FRICTION STIR PROCESSING OF NI-AI- BRONZE FOR IMPROVED MECHANICAL AND TRIBOLOGICAL PROPERTIES.

2016

S.no	NAME OF STUDENTS	PASSING YEAR	TITLE OF RESEARCH
1	MR. DINESH KUMAR	2016	MODELING AND ANALYSIS OF PUBLIC HEALTHCARE SERVICES.
2	MR. SUNNY JAFAR	2016	DEVELOPMENT OF NANOSTRUCTURED WEAR RESISTANT SURFACES THROUGH MICROWAVE CLADDING.
3	MR. YOGESH KUMAR SINGLA	2016	DEVELOPMENT OF RE MODIFIED FLUXES TO ENHANCE WEAR RESISTANCE.
4	MR. MANISH KUMAR CHAUHAN	2016	CONTROL OF FLOW FIELD OVER A SQUARE CYLINDER USING ACTIVE & PASSIVE METHODS.
5	MR NITIN KUMAR LAUTRE	2016	INVESTIGATIONS ON MICROWAVE DRILLING OF CHARACTERISTICALLY DIFFERENT MATERIALS.
6	MR. BHISHAM KUMAR DHURANDHER	2016	INVESTIGATIONS ON SOLID FUEL FIRE IN A COMPARTMENT.
7	MR. GAGANDEEP BHARDWAJ	2016	FATIGUE CRACK GROWTH SIMULATIONS USING EXTENDED
8	MR. VIJAY KUMAR DALLA	2016	STRATEGIES FOR CONTROL OF MULTIPLE AND HYPER REDUNDANT SPACE ROBOTS.
9	MR.MUDIMALLANA GOUD	2016	PERFORMANCE ANALYSIS OF ECDM
10	MR. SAURABH KUMAR YADAV	2016	A STUDY ON THE LUBRICATION OF HYDROSTATIC THRUST PAD BEARINGS.
11	MR. KRISHNAKANT DHAKAR	2016	INVESTIGATIONS ON NEAR DRY ELECTRIC DISCHARGE MACHINING AND ANALYSIS OF PROCESS PERFORMANCE.
12	SANJEEV KUMAR SAJJAN	2016	VAPOR CONDENSATION OF R-600A OVER SINGLE HORIZONTAL INTEGRAL FIN TUBES.
13	MR. HARPREET SINGH	2016	SOME STUDIES ON PRODUCT RECOVERY THROUGH ECH OF CLAD SURFACES.
14	AKASH SHUKLA	2016	DYNAMIC ANALYSIS OF LARGE STEAM TURBINE BLADES.
15	MR. HARAK SACHIN SUDHAKAR	2016	DYNAMICS OF DRAFT GEAR FOR FREIGHT STOCK VEHICLE.
16	MR. GANANATH DOULAT THAKRE	2016	µ- EHL STUDIES ON LINE CONTACTS.
17	MR. BHUPENDRA SINGH	2016	CHARACTERIZATION OF WAKE AND SUPPRESSION OF FLUID FORCES ACTING ON A ROW OF SQUARE CYLINDERS.
18	MR. ASHUTOSH	2016	MODELING OF RECONFIGURABLE MANUFACTURING SYSTEM WITH AVAILABILITY CONSIDERATION.
19	MS. PREETI JOSHI	2016	MULTIWALLED CARBON NANOTUBE COMPOSITES AND THEIR MECHANICAL BEHAVIOR.
20	MR. RAJESH CHOUDHARY	2016	STUDY OF NATURAL DONVECTION HEAT TRANSFER IN AL O /WATER NANOFLUIDS.
21	MR. TEMESGEN BERHANU YALLEW	2016	CHARACTERIZATION AND MACHINABILITY STUDY OF NATURAL FIBER REINFORCED COMPOSITES.
22	MR. DILBAGH PANCHAL	2016	PERFORMANCE ANALYSIS AND MAINTENANCE PLANNING FOR THE REAL OPERTING SYSTEMS.

2015

SL.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	MR. ANAND KUMAR GUPTA	2015	MECHANICAL PROPERTIES ANALYSIS OF CARBON NANOTUBE REINFORCED POLYMER COMPOSITES.
2	MR. SIVASAKTHIVEL T.	2015	STUDY OF THERMAL PERFORMANCE OF A GROUND SOURCE HEAT PUMP SYSTEM.
3	MR. GOR MEHULKUMAR MAHENDRABHAI	2015	DYNAMIC MODELING AND CONTROL OF QUADRUPED ROBOT WITH COMPLIANT LEGS.
4	MR. SACHIN KUMAR	2015	ANALYSIS AND MANAGEMENT OF RISKS IN GREEN SUPPLY CHAIN.
5	MR. G. VENKATESH	2015	PERFORMANCE ANALYSIS OF ULTRASONIC ASSISTED ABRASIVE FLOW MACHINING PROCESS.
6	MR. KISHORE DEBNATH	2015	MACHINING BEHAVIOR OF FIBER-REINFORCED POLYMER COMPOSITES.
7	MR. AJAI KUMAR SAHANI	2015	DESIGN FOR ASSEMBLY-STACK UP OF GEOMETRICAL TOLERANCE FOR COST OPTIMIZATION.
8	MR. KUSHARE PRASHANT BHANUDAS	2015	PERFORMANCE OF MULTILOBE NON-RECESSED HYDROSTATIC/HYBRID JOURNAL BEARINGSMACHINING BEHAVIOR OF FIBER-REINFORCED POLYMER COMPOSITES.
9	MR. KAMAL SHARMA, ENROLLMENT NO. 09923005	2015	NUMERICAL SIMULATION OF CRACK GROWTH PROBLEMS USING EFGM / XFEM.
10	MR. NAGVENDRA KUMAR KANOJE	2015	DYNAMIC ANALYSIS OF WHEEL RAIL STRUCTURE DUE TO VARIOUS DEFECTS.
11	MR. ATUL KUMAR	2015	REMAINING LIFE PREDICTION OF MACHINE ELEMENT BY USING REVERSE ENGINEERING APPROACH.
12	SACHIN KUMAR	2015	CRACK GROWTH SIMULATIONS IN DUCTILE MATERIALS USING XFEM/COUPLED FE- EFGM.
13	MR. MANJOT SINGH CHEEMA	2015	AN ULTROSONIC APPROACH TO FABRICATE MICROCHANNELS ON GLASS.
14	MR. VIKAS KUMAR	2015	EFFECT OF WHOLE BODY VIBRATION ON ACTIVITY COMFORT AND BIODYNAMIC RESPONSE.
15	MR. MIHIR KUMAR SUTAR	2015	DESIGN DEVELOPMENT AND CONTROL OF MINIATURE ROBOT FOR IN VIVO BIOPSY.
16	MR. MOHIT TYAGI	2015	STUDY AND ANALYSIS OF THE ISSUES OF SUPPLY CHAIN PERFORMANCE SYSTEM WITH CSR CONSIDERATIONS.
17	MR. SANDESH TRIVEDI	2015	DYNAMICS OF BORON NITRIDE NANOTUBE BASED NANORESONATORS.
18	MR. ARIJIT KUNDU	2015	FLOW BOILING HEAT TRANSFER OF REFRIGERANTS THROUGH INCLINED TUBE.
19	MR. IRFANUL HAQUE SIDDQUI	2015	INVESTIGATION ON GRADE INTERMIXING IN TUNDISH DURING LADLE CHANGE OVER.
20	MR. ABHINAV GUPTA	2015	CONDENSATION HEAT TRANSFER OF R-134A INSIDE HELICALLY COILED HORIZONTAL TUBES.
21	MR. LALIT THAKUR	2015	AN INVESTIGATION ON THERMAL SPRAY WEAR RESISTANT NANOSTRUCTURED COATING.
22	MR. SANJAY KUMAR SINGH	2015	NUMERICAL AND EXPERIMENTAL INVESTIGATIONS ON PARLLEL-FLOW THREE FLUID HEAT EXCHANGER.
23	MR. VINEET KUMAR	2015	AN INVESTIGATION OF MECHANICAL AND FRACTURE BEHAVIOR OF ULTRAFINE GRAINED 6082 AL ALLOY.

2014

Sr.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	UMESH KUMAR VISHWAKARMA	2014	DEVELOPMENT OF EDM PROCESS VARIANTS AND ANALYSIS OF THEIR EFFECTS ON PERFORMANCE MEASURES.
2	MR. FAISAL HASAN	2014	SOME PERFORMANCE ISSUES FOR A RECONFIGURABLE MANUFACTURING SYSTEM.
3	MRS. SAROJ RANI PATTNAIK	2014	REDUCTION OF SHRINKAGE AND POROSITY DEFECTS IN INVESTMENT CASTING.
4	MOHAMMAD ASIF	2014	EXPERIMENTAL AND NUMERICAL INVESTIGATION OF THERMAL CONTACT CONDUCTANCE.
5	PANCHAL MITESH BHAI BIPINBHAI	2014	VIBRATION ANALYSIS OF SINGLE WALLED BORON NITRIDE NANOTUBE BASED MASS SENSOR.
6	MR. A. ARUL PETER	2014	STUDY OF HEAT AND MOISTURE TRANSPORT THROUGH CONCRETE EXPOSED TO ELEVATED TEMPERATURES.
7	MR. PRASHANTH A. S.,	2014	EFFECT OF LOW FREQUENCY VIBRATIONS ON HUMAN COMFORT.
8	MR. JOY PRAKASH MISRA	2014	EX PERIMENTAL INVESTIGATIONS OF ELECTROCHEMICAL HONING OF BEVEL GEARS.
9	ARVIND KUMAR RAJPUT	2014	STUDY OF GEOMETRICALLY IMPERFECT MULTIRECESS FLUID FILM HYBRID JOURNAL BEARINGS.
10	MR. TRIVEDI CHIRAGKUMAR HASMUKHLAL	2014	EX PERIMENTAL AND NUMERICAL INVESTIGATIONS ON STEADY STATE AND TRANSIENT CHARACTERISTICS OF A HIGH MODEL FRANCIS TURBINE.
11	MR. ASHWINI KUMAR YADAV	2014	ASYMMETRIC BALLOONING OF PRESSURE TUBE UNDER LOCA IN INDIAN PHWR.
12	MR. BELETE SIRAHBIZU YIGEZU	2014	SOME STUDIES ON WEAR, MACHNIABILITY AND WELDABILITY OF AL -12% SI- TIC IN- SITU COMPOSITES.
13	MR. ANAND KUMAR	2014	SOME INVESTIGATIONS ON WEAR, MACHINABILITY AND WELDABILITY OF IN SITU AL - 4.5% CU/TIC MMC.
14	MR. PRAMENDRA KUMAR BAJPAI	2014	PROCESSING AND CHARACTERIZATION OF POLYMER MATRIX GREEN COMPOSITES.
15	MR. SACHIN C. GAJBHIYE	2014	DYNAMIC ANALYSIS OF INFLATABLE MEMBRANE STRUCTURE FOR SPACE APPLICATION.
16	MR. C. S. JAWALKAR	2014	INVESTIGATIONSGLASS.
17	MR. PANDYA DIVYANG HARIVADAN	2014	DYNAMIC ANALYSIS OF HIGH SPEED ROLLING ELEMENT BEARINGS DUE TO VARIOUS DEFECTS.
18	MR. ABHISHEK SINGH	2014	INVESTIGATION ON ELECTRO DISCHARGE DRILLING AND HOLE GRINDING OF METAL MATRIX COMPOSITES.

2013

Sr.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	MR. SARBJIT SINGH	2013	PRIMARY AND SECONDARY PROCESSING OF METAL MATRIX COMPOSITES (MMCS).
2	MR. ANIL KUMAR BIRRU	2013	SOME STUDIES ON FLUIDITY AND HOT TEARING OF ALUMINIUM CAST ALLOYS.
3	MR. KISHOR KULKARNI	2013	INVESTIGATION OF HEAT TRANSFER IN CONCENTRIC AND ECCENTRIC HORIZONTAL CYLINDRICAL ANNULI.
4	MR. CHITRANJAN	2013	A STUDY ON THE REWETTING OF HOT SURFACES BY IMPINING JET COOLING.
5	MR. VIKAS UPADHYAY	2013	MACHINABILITY STUDIES IN TURNING OF TI-6AL-4V ALLOY.
6	MR. SHAUKAT ALI	2013	FLUID FLOW AND HEAT TRANSFER INVESTIGATIONS BIHIND SURFACE MOUNTED SOLID AND SLITTED RIBS.
7	MR. HARENDRA KUMAR NARANG	2013	EXPERIMENTAL AND FINITE ELEMENT MODELING OF ARC WELDMENT PROFILES AND ANGULAR DISTORTIONS.
8	MR. KAPIL KUMAR	2013	MODELLING & RECONFIGURATION PLANNING OF RECONFIGURABLE MANUFACTURING SYSTEM.
9	MR. NATHI RAM	2013	A STUDY OF NON-RECESSED JOURNAL BEARINGS WITH MICROPOLAR AND COUPLE STRESS LUBRICANTS.

2012

SL.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	MS. PRABHKIRAN KAUR	2012	STUDIES ON ELECTROMAGNETICALLY STIR CAST AL-SI ALLOYS.
2	MR. SOMNATH BHATTACHARYA	2012	NUMERICAL SIMULATION OF FATIGUE FAILURE IN FUNCTIONALLY GRADED MATERIALS USING XFEM.
3	MR. HARESHKUMAR PUNALAL PATOLIA	2012	DYNAMICS AND CONTROL OF DUAL-ARM SPACE ROBOTS.
4	MR. ATUL SIDOLA	2012	DESIGN AND ANALYSIS OF SUPPLY CHAIN FOR TRANSPORT DISRUPTIONS RISK USING SYSTEM DYNAMICS.
5	MR. DHEERAJ GUPTA	2012	DEVELOPMENT AND CHARACTERISATION OF METAL BASED DEPOSITS THROUGH MICROWAVE HEATING.
6	MS. PANDYA UNNATI RAMESHCHANDRA	2012	ANALYSIS OF CARBON NANOTUBE REINFORCED COMPOSITES.
7	MR. PAWAN KUMAR RAKESH	2012	SECONDARY PROCESSING OF POLYMER MATRIX COMPOSITES.
8	MR. ADISU BEKELE ALEMAYEH	2012	THERMO-HYDRAULIC CHARACTERISTICS OF SOLAR AIR HEATER WITH SURFACE MOUNTED OBSTACLES.
9	MR. HRUSIKESH MOHANTY	2012	SOME MODELING APPROACHES ON THE EFFECTS OF TOOL GEOMETRIES ON FRICTION STIR WELDS.
10	MR. CHAITANYA SHARMA	2012	MECHANICAL AND CORROSION BEHAVIOR OF FRICTION STIR WELDED JOINTS OF 7039 ALUMINIUM ALLOY.

2011

SL.NO.	NAME	PASSING YEAR	TITLE OF RESEARCH
1	MR. VIKAS M.PHALLE	2011	INFLUENCE OF WEAR ON THE PERFORMANCE OF MULTIRECESS FLUID FILM JOURNAL BEARINGS.
2	MR. V. L. KRISHNAN	2011	MODELING AND CONTROL OF QUADRUPED ROBOT WITH FLEXIBLE LEGS.
3	MR. SUMAN KANT	2011	SOME INVESTIGATIONS ON THE USE OF FLOW MODIFIERS IN CONTINUOUS CASTING TUNDISH.
4	MR. SRINATH M. S	2011	JOINING AND CHARACTERISATION OF METALLIC MATERIALS USING MICROWAVE HYBRID HEATING.
5	MR. PARVIN PANDHARINATH PATIL	2011	PARAMETRIC STUDY OF VIBRATION BASED ELECTROMECHANICAL CORIOLIS MASS FLOW SENSOR.
6	MAHESH KAMALAKAR BHIWAPURKAR	2011	EFFECT OF WHOLE - BODY VIBRATION ON ACTIVITY COMFORT.
7	MR. JOSHI ANAND YAGNESHBHAI	2011	DYNAMIC ANALYSIS OF SINGLE WALLED CARBON NANOTUBE BASED MASS SENSOR.
8	MR. GOPAL NANDAN	2011	STUDY OF SAGGING AND BALLOONING BEHAVIOUR OF INDIAN PHWR PRESSURE TUBE DURING LOCA.
9	PAVAN KUMAR KANKAR	2011	FAULT DIAGNOSIS OF ROLLING ELEMENT BEARINGS USING VIBRATION ?SIGNATURE ANALYSIS.