1. Rahman A., Jayaganthan R., 2017, Study of CoFe2O4/NiFe2O4 nanocomposite ferrite film, Volume- 33, Issue- 11, 810 To 815, DOI- 10.1080/02670844.2017.1294812, EID- 2-s2.0-85014543735
2. Verma R., Srinivasan A., Jayaganthan R., Nath S.K., Goel S., 2017, Studies on tensile behaviour and microstructural evolution of UFG Mg-4Zn-4Gd alloy processed through hot rolling, Volume- 704, Issue- , 412 To 426, DOI- 10.1016/j.msea.2017.08.032, EID- 2-s2.0-85027547513
3. Yogesha K.K., Joshi A., Kumar N., Jayaganthan R., 2017, Effect of cryo groove rolling followed by warm rolling (CGW) on the mechanical properties of 5052 Al alloy, Volume- 32, Issue- 12, 1336 To 1344, DOI- 10.1080/10426914.2016.1244845, EID- 2-s2.0-85001946065
4. Fuloria D., Kumar N., Jayaganthan R., Jha S.K., Srivastava D., 2017, An investigation of effect of annealing at different temperatures on microstructures and bulk textures development in deformed Zircaloy-4, Volume- 129, Issue- , 217 To 233, DOI- 10.1016/j.matchar.2017.04.038, EID- 2-s2.0-85019125243
5. Ranjan P., kumar L.S., Suematsu H., Chakravarthy S.R., Jayaganthan R., Sarathi R., 2017, Thermodynamic analysis of ZnO nanoparticle formation by wire explosion process and characterization, Volume- 43, Issue- 9, 6709 To 6720, DOI- 10.1016/j.ceramint.2017.02.069, EID- 2-s2.0-85013667252
6. Yogesha K.K., Joshi A., Jayaganthan R., 2017, Fatigue Behavior of Ultrafine-Grained 5052 Al Alloy Processed Through Different Rolling Methods, Volume- 26, Issue- 6, 2826 To 2836, DOI- 10.1007/s11665-017-2705-8, EID- 2-s2.0-85018411647
7. Rahman A., Jayaganthan R., 2017, Synthesis, Characterization and Photocatalytic Studies of La, Dy-doped ZnO nanoparticles, Volume- 70, Issue- 4, 1063 To 1074, DOI- 10.1007/s12666-016-0897-5, EID- 2-s2.0-84969850295
8. Joshi A., Yogesha K.K., Jayaganthan R., 2017, Influence of cryorolling and followed by annealing on high cycle fatigue behavior of ultrafine grained Al 2014 alloy, Volume- 127, Issue- , 253 To 271, DOI- 10.1016/j.matchar.2017.02.003, EID- 2-s2.0-85015621866
9. Fuloria D., Kumar N., Jayaganthan R., Jha S.K., Srivastava D., 2017, Microstructural and textural characterization of Zircaloy-4 processed by rolling at different temperatures, Volume- 127, Issue- , 296 To 310, DOI- 10.1016/j.matchar.2017.02.020, EID- 2-s2.0-85015383045
10. Bhardwaj V., Chowdhury R., Jayaganthan R., 2017, Adhesion strength and nanomechanical characterization of ZnO thin films, Volume- 32, Issue- 8, 1432 To 1443, DOI- 10.1557/jmr.2017.85, EID- 2-s2.0-85017597927
11. KUMAR N., JAYAGANTHAN R., BROKMEIER H.-G., 2017, Effect of deformation temperature on precipitation, microstructural evolution, mechanical and corrosion behavior of 6082 Al alloy, Volume- 27, Issue- 3, 475 To 492, DOI- 10.1016/S1003-6326(17)60055-4, EID- 2-s2.0-85017395004
12. Santhosh Kumar L., Chakravarthi S.R., Sarathi R., Jayaganthan R., 2017, Thermodynamic modeling and characterizations of Al nanoparticles produced by electrical wire explosion process, Volume- 32, Issue- 4, 897 To 909, DOI- 10.1557/jmr.2016.507, EID- 2-s2.0-85009999736
13. Vendra S.S.L., Goel S., Kumar N., Jayaganthan R., 2017, A study on fracture toughness and strain rate sensitivity of severely deformed Al 6063 alloys processed by multiaxial forging and rolling at cryogenic temperature, Volume- 686, Issue- , 82 To 92, DOI- 10.1016/j.msea.2017.01.035, EID- 2-s2.0-85009343102
14. Kumar N., Goel S., Jayaganthan R., Brokmeier H.-G., 2017, Effect of grain boundary misorientaton, deformation temperature and AlFeMnSi-phase on fatigue life of 6082 Al alloy, Volume- 124, Issue- , 229 To 240, DOI- 10.1016/j.matchar.2017.01.002, EID- 2-s2.0-85009152877
15. Balakrishnan V., Roshan P., Goel S., Jayaganthan R., Singh I.V., 2017, Experimental and XFEM Simulation of Tensile and Fracture Behavior of Al 6061 Alloy Processed by Severe Plastic Deformation, Volume- 6, Issue- 1, 55 To 72, DOI- 10.1007/s13632-016-0332-7, EID- 2-s2.0-85010657724
16. Sahoo A., Gautam R., Vinu R., Jayaganthan R., Sarathi R., 2017, Understanding the physico-chemical and surface discharge properties of epoxy silicon carbide nanocomposites, Volume- , Issue- , To , DOI- 10.1002/pc.24341, EID- 2-s2.0-85016641680
17. Singh D., Jayaganthan R., Nageswara Rao P., Kumar A., Venketeswarlu D., 2017, Effect of initial grain size on microstructure and mechanical behavior of cryorolled AA 5083, Volume- 4, Issue- 8, 7609 To 7617, DOI- 10.1016/j.matpr.2017.07.094, EID- 2-s2.0-85032296459
18. Bhardwaj V., Chowdhury R., Jayaganthan R., 2016, Nanomechanical and microstructural characterization of sputter deposited ZnO thin films, Volume- 389, Issue- , 1023 To 1032, DOI- 10.1016/j.apsusc.2016.08.028, EID- 2-s2.0-84981507131
19. Joshi A., Yogesha K.K., Kumar N., Jayaganthan R., 2016, Influence of Annealing on Microstructural Evolution, Precipitation Sequence, and Fracture Toughness of Cryorolled Al–Cu–Si Alloy, Volume- 5, Issue- 6, 540 To 556, DOI- 10.1007/s13632-016-0313-x, EID- 2-s2.0-84996565932
20. Rahman A., Jayaganthan R., 2016, Study of Nanostructured CeO2 Coatings on Superalloy, Volume- 32, Issue- 10, 771 To 778, DOI- 10.1080/02670844.2016.1148381, EID- 2-s2.0-84978529055
21. Prakash R., Jayaganthan R., Kaur D., 2016, Structural, corrosion and mechanical properties of sputtered deposited chromium tungsten nitride (Cr1-xWxN) nanocomposite thin films, Volume- 7, Issue- 9, 723 To 729, DOI- 10.5185/amlett.2016.6362, EID- 2-s2.0-84982311353
22. Goel S., Kumar N., Fuloria D., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2016, Evaluating Fracture Toughness of Rolled Zircaloy-2 at Different Temperatures Using XFEM, Volume- 25, Issue- 9, 4046 To 4058, DOI- 10.1007/s11665-016-2241-y, EID- 2-s2.0-84979285115
23. Fuloria D., Kumar N., Goel S., Jayaganthan R., Jha S., Srivastava D., 2016, Tensile properties and microstructural evolution of Zircaloy-4 processed through rolling at different temperatures, Volume- 103, Issue- , 40 To 51, DOI- 10.1016/j.matdes.2016.04.052, EID- 2-s2.0-84964507738
24. Joshi A., Kumar N., Yogesha K.K., Jayaganthan R., Nath S.K., 2016, Mechanical Properties and Microstructural Evolution in Al 2014 Alloy Processed Through Multidirectional Cryoforging, Volume- 25, Issue- 7, 3031 To 3045, DOI- 10.1007/s11665-016-2126-0, EID- 2-s2.0-84976334445
25. Mohan K., Suresh J.A., Ramu P., Jayaganthan R., 2016, Microstructure and Mechanical Behavior of Al 7075-T6 Subjected to Shallow Cryogenic Treatment, Volume- 25, Issue- 6, 2185 To 2194, DOI- 10.1007/s11665-016-2052-1, EID- 2-s2.0-84964270634
26. Yogesha K.K., Kumar N., Joshi A., Jayaganthan R., Nath S.K., 2016, A Comparative Study on Tensile and Fracture Behavior of Al–Mg Alloy Processed Through Cryorolling and Cryo Groove Rolling, Volume- 5, Issue- 3, 251 To 263, DOI- 10.1007/s13632-016-0282-0, EID- 2-s2.0-84970046712
27. Nayak S., Bhushan B., Jayaganthan R., Gopinath P., Agarwal R.D., Lahiri D., 2016, Strengthening of Mg based alloy through grain refinement for orthopaedic application, Volume- 59, Issue- , 57 To 70, DOI- 10.1016/j.jmbbm.2015.12.010, EID- 2-s2.0-84952670877
28. Sowjanya M., Pamu D., Chowdharuy R., Jayaganthan R., 2016, Effects of CeO2dopant on structural and optical properties of ZnO thin films prepared by rf sputtering, Volume- 22, Issue- 4, 896 To 900, DOI- 10.1166/asl.2016.6982, EID- 2-s2.0-84985897175
29. Rahman A., Jayaganthan R., 2016, Study of nanostructured Co and Al co-doped ZnO films fabricated by electroless technique, Volume- 32, Issue- 5, 372 To 377, DOI- 10.1179/1743294415Y.0000000079, EID- 2-s2.0-84964412205
30. Shukla V.N., Jayaganthan R., Tewari V.K., 2016, Degradation behaviour and microstructural characterisation of HVOF-sprayed Cr3C2-NiCr cermet coatings in molten salt environment, Volume- 53, Issue- 1, 15 To 27, DOI- 10.1504/IJMPT.2016.076364, EID- 2-s2.0-84969751453
31. Chauhan V., Dubey P., Verma S., Jayaganthan R., Chandra R., 2015, Dry Sliding and Abrasive Wear Behavior of Nanostructure Zr–W–N Coating, Volume- 68, Issue- 5, 799 To 807, DOI- 10.1007/s12666-015-0513-0, EID- 2-s2.0-84941947649
32. Kumar N., Goel S., Jayaganthan R., Brokmeier H.-G., 2015, Effect of Solution Treatment on Mechanical and Corrosion Behaviors of 6082-T6 Al Alloy, Volume- 4, Issue- 5, 411 To 422, DOI- 10.1007/s13632-015-0219-z, EID- 2-s2.0-84943225177
33. Rao P.N., Singh D., Brokmeier H.-G., Jayaganthan R., 2015, Effect of ageing on tensile behavior of ultrafine grained Al 6061 alloy, Volume- 641, Issue- , 391 To 401, DOI- 10.1016/j.msea.2015.06.036, EID- 2-s2.0-84934311790
34. Rana N., Mahapatra M.M., Jayaganthan R., Prakash S., 2015, High-Temperature Oxidation and Hot Corrosion Studies on NiCrAlY Coatings Deposited by Flame-Spray Technique, Volume- 24, Issue- 5, 769 To 777, DOI- 10.1007/s11666-015-0237-z, EID- 2-s2.0-84929946861
35. Hussain M., Nageswara Rao P., Jayaganthan R., 2015, Development of Ultrafine-Grained Al–Mg–Si Alloy Through SPD Processing, Volume- 4, Issue- 3, 219 To 228, DOI- 10.1007/s13632-015-0205-5, EID- 2-s2.0-84930939271
36. Trivedi P., Patel A.K., Maurya R., Jayaganthan R., Balani K., 2015, Nanomechanical Characterization and Protein Adsorption of Cold-Rolled Zirconium Alloy, Volume- 67, Issue- 4, 726 To 732, DOI- 10.1007/s11837-015-1324-9, EID- 2-s2.0-84939466356
37. Singh S., Manoj Kumar R., Kuntal K.K., Gupta P., Das S., Jayaganthan R., Roy P., Lahiri D., 2015, Sol–Gel Derived Hydroxyapatite Coating on Mg-3Zn Alloy for Orthopedic Application, Volume- 67, Issue- 4, 702 To 712, DOI- 10.1007/s11837-015-1364-1, EID- 2-s2.0-84939472061
38. Shukla V.N., Jayaganthan R., Tewari V.K., 2015, Degradation Behavior of HVOF-Sprayed Cr3C2-25%NiCr Cermet Coatings Exposed to High Temperature Environment, Volume- 2, Issue- 42830, 1805 To 1813, DOI- 10.1016/j.matpr.2015.07.048, EID- 2-s2.0-84947298244
39. Kumar N., Rao P.N., Jayaganthan R., Brokmeier H.-G., 2015, Effect of cryorolling and annealing on recovery, recrystallisation, grain growth and their influence on mechanical and corrosion behaviour of 6082 Al alloy, Volume- 165, Issue- , 177 To 187, DOI- 10.1016/j.matchemphys.2015.09.014, EID- 2-s2.0-84943239019
40. Rahman A., Charoo M.S., Jayaganthan R., 2015, Structural, optical and photocatalytic properties of zinc aluminate spinel nanoparticles, Volume- 30, Issue- 3, 168 To 176, DOI- 10.1179/1753555714Y.0000000211, EID- 2-s2.0-84920051753
41. Kamal S., Sharma K.V., Jayaganthan R., Prakash S., 2015, Hot corrosion behavior of thermal spray coatings on superalloy in coal-fired boiler environment, Volume- 30, Issue- 18, 2829 To 2843, DOI- 10.1557/jmr.2015.264, EID- 2-s2.0-84944096585
42. Sarma J.V.N., Rahman A., Jayaganthan R., Chowdhury R., Haranath D., 2015, Al-doped ZnO Nanostructured Thin Films: Density Functional Theory and Experiment, Volume- 14, Issue- 4, To , DOI- 10.1142/S0219581X15500155, EID- 2-s2.0-84938556143
43. Goel S., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2015, Texture evolution and ultrafine grain formation in cross-cryo-rolled zircaloy-2, Volume- 28, Issue- 7, 837 To 846, DOI- 10.1007/s40195-015-0267-z, EID- 2-s2.0-84933520694
44. Trivedi P., Goel S., Das S., Jayaganthan R., Lahiri D., Roy P., 2015, Biocompatibility of ultrafine grained zircaloy-2 produced by cryorolling for medical applications, Volume- 46, Issue- , 309 To 315, DOI- 10.1016/j.msec.2014.10.056, EID- 2-s2.0-84908374399
45. Fuloria D., Goel S., Jayaganthan R., Srivastava D., Dey G.K., Saibaba N., 2015, Mechanical properties and microstructural evolution of ultrafine grained zircaloy-4 processed through multiaxial forging at cryogenic temperature, Volume- 25, Issue- 7, 2221 To 2229, DOI- 10.1016/S1003-6326(15)63835-3, EID- 2-s2.0-84938702169
46. Rana N., Mahapatra M.M., Jayaganthan R., Prakash S., 2014, Deposition of nanocrystalline coatings by modified LVOF thermal spray method, Volume- 615, Issue- , 779 To 783, DOI- 10.1016/j.jallcom.2014.07.038, EID- 2-s2.0-84905001907
47. Singh D., Nageswara Rao P., Jayaganthan R., 2014, High cyclic fatigue behaviour of ultrafine grained Al 5083 alloy, Volume- 30, Issue- 14, 1835 To 1842, DOI- 10.1179/1743284713Y.0000000496, EID- 2-s2.0-84987786653
48. Fuloria D., Nageswararao P., Jayaganthan R., Jha S., Srivastava D., 2014, An investigation of deformed microstructure and mechanical properties of Zircaloy-4 processed through multiaxial forging, Volume- , Issue- , To , DOI- 10.1016/j.matchemphys.2015.09.025, EID- 2-s2.0-84955613368
49. Rahman A., Jayaganthan R., Sharma J.V.N., 2014, Study of multilayer ZnO/Al doped ZnO nanostructured thin films, Volume- 30, Issue- 10, 709 To 715, DOI- 10.1179/1743294414Y.0000000316, EID- 2-s2.0-84907801745
50. Rao P.N., Viswanadh B., Jayaganthan R., 2014, Effect of cryorolling and warm rolling on precipitation evolution in Al 6061 alloy, Volume- 606, Issue- , 1 To 10, DOI- 10.1016/j.msea.2014.03.031, EID- 2-s2.0-84897934471
51. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Mechanical behaviour and microstructural characterizations of ultrafine grained Zircaloy-2 processed by cryorolling, Volume- 603, Issue- , 23 To 29, DOI- 10.1016/j.msea.2014.02.025, EID- 2-s2.0-84903367110
52. Trivedi P., Gupta P., Srivastava S., Jayaganthan R., Chandra R., Roy P., 2014, Characterization and in vitro biocompatibility study of Ti-Si-N nanocomposite coatings developed by using physical vapor deposition, Volume- 293, Issue- , 143 To 150, DOI- 10.1016/j.apsusc.2013.12.119, EID- 2-s2.0-84895062552
53. Rana N., Jayaganthan R., Prakash S., 2014, Stepwise depletion of coating elements as a result of hot corrosion of NiCrAlY coatings, Volume- 23, Issue- 2, 643 To 650, DOI- 10.1007/s11665-013-0774-x, EID- 2-s2.0-84893816346
54. Shah H.N., Jayaganthan R., 2014, Synthesis and micro-structural characterization of craln coatings by reactive magnetron sputtering, Volume- 12, Issue- , 421 To 430, DOI- 10.1007/978-81-322-1656-8_38, EID- 2-s2.0-84950308966
55. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2014, Graphyne-based single electron transistor: Ab initio analysis, Volume- 9, Issue- 3, To , DOI- 10.1142/S1793292014500325, EID- 2-s2.0-84902366502
56. Nageswara rao P., Singh D., Jayaganthan R., 2014, Effect of post cryorolling treatments on microstructural and mechanical behaviour of ultrafine grained Al-Mg-Si alloy, Volume- 30, Issue- 10, 998 To 1005, DOI- 10.1016/j.jmst.2014.03.009, EID- 2-s2.0-84908509040
57. Sarma J.V.N., Chowdhury R., Jayaganthan R., Scarpa F., 2014, Atomistic studies on tensile mechanics of bn nanotubes in the presence of defects, Volume- 13, Issue- 1, To , DOI- 10.1142/S0219581X14500057, EID- 2-s2.0-84898898821
58. Singh V.P., Sil A., Jayaganthan R., 2014, Evaluation of dry sliding and slurry erosion behaviour of plasma sprayed nanostructured Cr2O3-3TiO2 coatings, Volume- 8, Issue- 3, 131 To 138, DOI- 10.1179/1751584X13Y.0000000054, EID- 2-s2.0-84905259619
59. Rana N., Jayaganthan R., Prakash S., 2014, Stepwise oxidation mechanism of HVOF sprayed NiCrAlY coatings in air, Volume- 67, Issue- 3, 393 To 400, DOI- 10.1007/s12666-013-0362-7, EID- 2-s2.0-84901019129
60. Rao P.N., Kaurwar A., Singh D., Jayaganthan R., 2014, Enhancement in strength and ductility of Al-Mg-Si alloy by cryorolling followed by warm rolling, Volume- 75, Issue- , 123 To 128, DOI- 10.1016/j.proeng.2013.11.027, EID- 2-s2.0-84906736281
61. Rana N., Shukla V.N., Jayaganthan R., Prakash S., 2014, Degradation studies of micro and nanocrystalline nicraly coatings for high temperature corrosion protection, Volume- 75, Issue- , 118 To 122, DOI- 10.1016/j.proeng.2013.11.025, EID- 2-s2.0-84906735982
62. Rahman A., Jayaganthan R., Chandra R., 2014, Study of structural and optical properties of Zn1-xAl xO nanoparticles, Volume- 18, Issue- 1, 15 To 21, DOI- 10.1016/j.mssp.2013.09.024, EID- 2-s2.0-84887473567
63. Rao P.N., Singh D., Jayaganthan R., 2014, Mechanical properties and microstructural evolution of Al 6061 alloy processed by multidirectional forging at liquid nitrogen temperature, Volume- 56, Issue- , 97 To 104, DOI- 10.1016/j.matdes.2013.10.045, EID- 2-s2.0-84888367328
64. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2014, The influence of various sputtering parameters on structural, wettability and optical properties of Zr2ON2 thin films, Volume- 181, Issue- 1, 16 To 23, DOI- 10.1016/j.mseb.2013.11.003, EID- 2-s2.0-84890285079
65. Kumar V., Singh I.V., Mishra B.K., Jayaganthan R., 2014, Improved fracture toughness of cryorolled and room temperature rolled 6082 al alloys, Volume- 27, Issue- 2, 359 To 367, DOI- 10.1007/s40195-014-0057-z, EID- 2-s2.0-84901506702
66. Shukla V.N., Rana N., Jayaganthan R., Tewari V.K., 2014, Degradation studies of wire arc sprayed fecrbsimn alloy coating in molten salt environment, Volume- 75, Issue- , 113 To 117, DOI- 10.1016/j.proeng.2013.11.025, EID- 2-s2.0-84906734516
67. Rana N., Jayaganthan R., Prakash S., 2014, Microstructural features and oxidation behavior of nano and conventional NiCrAlY coatings developed by LVOF process, Volume- 260, Issue- , 28 To 33, DOI- 10.1016/j.surfcoat.2014.06.073, EID- 2-s2.0-84918834348
68. Hussain M., Rao P.N., Singh D., Jayaganthan R., Singh S., 2014, Comparative study of microstructure and mechanical properties of al 6063 alloy processed by multi axial forging at 77k and cryorolling, Volume- 75, Issue- , 129 To 133, DOI- 10.1016/j.proeng.2013.11.028, EID- 2-s2.0-84906777409
69. Goel S., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Mechanical and microstructural characterizations of ultrafine grained Zircaloy-2 produced by room temperature rolling, Volume- 55, Issue- , 612 To 618, DOI- 10.1016/j.matdes.2013.09.039, EID- 2-s2.0-84887203290
70. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Development of Ultrafine Grained Zircaloy-2 by Room Temperature Cross Rolling, Volume- 24, Issue- 2, 609 To 617, DOI- 10.1007/s11665-014-1287-y, EID- 2-s2.0-84925533592
71. Goel S., Gaurav K., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Saibaba N., 2014, Experimental evaluation of mechanical properties and fracture-fatigue simulation of cryo- and room-temperature-rolled zircaloy-2, Volume- 9, Issue- 2, 120 To 135, DOI- 10.1504/IJMMP.2014.066573, EID- 2-s2.0-84920084349
72. Goel S., Keskar N., Jayaganthan R., Singh I.V., Srivastava D., Dey G.K., Jha S.K., Saibaba N., 2014, Texture and Mechanical Behavior of Zircaloy-2 Rolled at Different Temperatures, Volume- 24, Issue- 2, 618 To 625, DOI- 10.1007/s11665-014-1315-y, EID- 2-s2.0-84925493304
73. Rahman A., Jayaganthan R., Jain R.K., Pramod J.P., Chandra R., Ambardar R., 2013, Processing and characterisation of nanostructured Al doped ZnO antireflection films, Volume- 28, Issue- 6, 357 To 363, DOI- 10.1179/1753555713Y.0000000079, EID- 2-s2.0-84885401164
74. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Environmental degradation behavior of high-velocity arc sprayed fecrbmnsi alloy coatings in a coal fired boiler, Volume- 26, Issue- 5, 602 To 612, DOI- 10.1007/s40195-013-0199-4, EID- 2-s2.0-84891751665
75. Das P., Jayaganthan R., Singh I.V., 2013, Experimental finding of initiation fracture toughness and fem simulation of fracture behaviour of UFG 7075 al alloy, Volume- 4, Issue- 9, 668 To 681, DOI- 10.5185/amlett.2012.12490, EID- 2-s2.0-84883684486
76. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2013, Molecular dynamics investigation of the thermomechanical behavior of monolayer GaN, Volume- 113, Issue- 24, To , DOI- 10.1063/1.4812328, EID- 2-s2.0-84879863565
77. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Degradation behavior of nanostructured coatings deposited by high-velocity Arc Spraying Process in an Actual Environment of a Coal-Fired Boiler, Volume- 65, Issue- 6, 784 To 791, DOI- 10.1007/s11837-013-0612-5, EID- 2-s2.0-84878147462
78. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2013, Effect of power variation on wettability and optical properties of co-sputtered titanium and zirconium oxynitride films, Volume- 36, Issue- 3, 403 To 409, DOI- 10.1007/s12034-013-0486-8, EID- 2-s2.0-84878858079
79. Sarma J.V.N., Chowdhury R., Jayaganthan R., 2013, Mechanical behavior of gallium nitride nanosheets using molecular dynamics, Volume- 75, Issue- , 29 To 34, DOI- 10.1016/j.commatsci.2013.03.035, EID- 2-s2.0-84876564122
80. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2013, Degradation behaviour of sputtered Co-Al coatings on superalloy, Volume- 138, Issue- 1, 49 To 62, DOI- 10.1016/j.matchemphys.2012.11.004, EID- 2-s2.0-84873738151
81. Rahman A., Jayaganthan R., Chandra R., Ambardar R., 2013, High temperature degradation behavior of sputtered nanostructured Co-Al coatings on superalloy, Volume- 265, Issue- , 10 To 23, DOI- 10.1016/j.apsusc.2012.10.002, EID- 2-s2.0-84871932105
82. Shukla V.N., Jayaganthan R., Tewari V.K., 2013, Microstructural characterization and cyclic oxidation behavior of HVOF-sprayed Cr3C2-NiCr coating on Boiler steel at elevated temperature, Volume- 736, Issue- , 289 To 300, DOI- 10.4028/www.scientific.net/MSF.736.289, EID- 2-s2.0-84873044636
83. Nageswara Rao P., Singh D., Jayaganthan R., 2013, Effect of annealing on microstructure and mechanical properties of Al 6061 alloy processed by cryorolling, Volume- 29, Issue- 1, 76 To 82, DOI- 10.1179/1743284712Y.0000000041, EID- 2-s2.0-84873814766
84. Singh D., Nageswara Rao P., Jayaganthan R., 2013, Microstructures and impact toughness behavior of Al 5083 alloy processed by cryorolling and afterwards annealing, Volume- 20, Issue- 8, 759 To 769, DOI- 10.1007/s12613-013-0794-4, EID- 2-s2.0-84901290495
85. Singh D., Rao P.N., Jayaganthan R., 2013, Effect of deformation temperature on mechanical properties of ultrafine grained Al-Mg alloys processed by rolling, Volume- 50, Issue- , 646 To 655, DOI- 10.1016/j.matdes.2013.02.068, EID- 2-s2.0-84876303073
86. Rahman A., Jayaganthan R., Jain R.K., Chawla A.K., Chandra R., Ambardar R., 2013, Study of nanostructured Al doped ZnO films, Volume- 29, Issue- 6, 440 To 446, DOI- 10.1179/1743294413Y.0000000140, EID- 2-s2.0-84880746072
87. Singh D., Nageswararao P., Jayaganthan R., 2012, Microstructural studies of Al 5083 alloy deformed through cryorolling, Volume- 585, Issue- , 376 To 380, DOI- 10.4028/www.scientific.net/AMR.585.376, EID- 2-s2.0-84870600508
88. Rana N., Jayaganthan R., Prakash S., 2012, Microstructural features and oxidation behaviour of NiCrAlY coatings obtained by HVOF process, Volume- 585, Issue- , 507 To 511, DOI- 10.4028/www.scientific.net/AMR.585.507, EID- 2-s2.0-84870582394
89. Shukla V.N., Jayaganthan R., Tewari V.K., 2012, Hot corrosion studies of HVOF-sprayed Cr3C2-NiCr coating on 310S stainless steel in an actual environment of a coal fired boiler, Volume- 585, Issue- , 483 To 487, DOI- 10.4028/www.scientific.net/AMR.585.483, EID- 2-s2.0-84870589980
90. Mahesh R.A., Rao G., Jayaganthan R., Prakash S., 2012, Hot corrosion behaviour of HVOF sprayed NiCrAlY-0·4 wt-%CeO2 coatings on superalloys in aggressive environment at 900°C, Volume- 5, Issue- 2, 142 To 149, DOI- , EID- 2-s2.0-84876826234
91. Das P., Singh I.V., Jayaganthan R., 2012, Crack growth simulation of bulk and ultrafine grained 7075 Al alloy by XFEM, Volume- 44, Issue- 42798, 252 To 276, DOI- 10.1504/IJMPT.2012.050192, EID- 2-s2.0-84868518492
92. Kralia L., Singh I.V., Pathak P.M., Jayaganthan R., 2012, An experimental study of mechanical and fatigue behavior of cryorolled Al 6063 alloy, Volume- 7, Issue- 2, 124 To 127, DOI- , EID- 2-s2.0-84866688406
93. Shah H.N., Jayaganthan R., 2012, Influence of Al contents on the microstructure, mechanical, and wear properties of magnetron sputtered CrAlN coatings, Volume- 21, Issue- 9, 2002 To 2009, DOI- 10.1007/s11665-011-0112-0, EID- 2-s2.0-84869493445
94. Rahman A., Jayaganthan R., Jain R.K., Chandra R., Ambardar R., 2012, Study of high temperature oxidation kinetics of Co-Al coating on superalloy, Volume- 28, Issue- 8, 620 To 626, DOI- 10.1179/1743294412Y.0000000041, EID- 2-s2.0-84867167166
95. Nageswara rao P., Jayaganthan R., 2012, Effects of warm rolling and ageing after cryogenic rolling on mechanical properties and microstructure of Al 6061 alloy, Volume- 39, Issue- , 226 To 233, DOI- 10.1016/j.matdes.2012.02.010, EID- 2-s2.0-84858719637
96. Walia R., Pivin J.C., Chawla A.K., Jayaganthan R., Gautam Y.K., Chandra R., 2012, A comprehensive study of structural and magnetic properties of sputter deposited nickel-silica thin films, Volume- 177, Issue- 13, 1073 To 1079, DOI- 10.1016/j.mseb.2012.05.004, EID- 2-s2.0-84863982960
97. Das P., Singh I.V., Jayaganthan R., 2012, An experimental evaluation of material properties and fracture simulation of cryorolled 7075 Al alloy, Volume- 21, Issue- 7, 1167 To 1181, DOI- 10.1007/s11665-011-0062-6, EID- 2-s2.0-84865318607
98. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2012, Structural, Wettability and Optical Investigation of Titanium Oxynitride Coatings: Effect of Various Sputtering Parameters, Volume- 28, Issue- 6, 512 To 523, DOI- 10.1016/S1005-0302(12)60091-7, EID- 2-s2.0-84863859488
99. Walia R., Pivin J.C., Jain R., Jayaganthan R., Pippel E., Singh F., Chandra R., 2012, Effect of swift heavy ion irradiation on sputter deposited SiO 2/Co/Pt/SiO 2 multilayers, Volume- 280, Issue- , 123 To 130, DOI- 10.1016/j.nimb.2012.03.011, EID- 2-s2.0-84860305793
100. Singh V.P., Sil A., Jayaganthan R., 2012, Tribological behaviour of nanostructured Al 2O 3 coatings, Volume- 28, Issue- 4, 277 To 284, DOI- 10.1179/1743294411Y.0000000076, EID- 2-s2.0-84862221957
101. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2012, Hot corrosion of nanostructured Cr/Co-Al coatings, Volume- 28, Issue- 4, 285 To 293, DOI- 10.1179/1743294411Y.0000000039, EID- 2-s2.0-84862228511
102. Rahman A., Chawla V., Jayaganthan R., Chandra R., Tewari V.K., Ambardar R., 2012, High temperature oxidation behaviour of Cr/Co-Al coated superalloy, Volume- 28, Issue- 4, 249 To 256, DOI- 10.1179/1743294411Y.0000000030, EID- 2-s2.0-84862177796
103. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., Mohamed S.B., 2012, Microstructural characterisations and high temperature oxidation studies of nanostructured Co-Al coatings deposited on superalloy, Volume- 65, Issue- 2, 205 To 217, DOI- 10.1007/s12666-011-0115-4, EID- 2-s2.0-84863833388
104. Singh V.P., Sil A., Jayaganthan R., 2012, Wear of plasma sprayed conventional and nanostructured Al 2O 3 and Cr 2O 3, based coatings, Volume- 65, Issue- 1, 1 To 12, DOI- 10.1007/s12666-011-0070-0, EID- 2-s2.0-84859780407
105. Bisht A., Albe K., Jayaganthan R., 2012, Effect of porosity on mechanical behaviour of nanocrystalline metals, Volume- , Issue- , To , DOI- 10.1109/ICEmElec.2012.6636247, EID- 2-s2.0-84890872965
106. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2011, Characterization of bi-phased Zr2ON2-ZrO2 coatings deposited by RF magnetron sputtering, Volume- 520, Issue- 5, 1589 To 1596, DOI- 10.1016/j.tsf.2011.09.010, EID- 2-s2.0-82755189362
107. Thakur L., Arora N., Jayaganthan R., Sood R., 2011, An investigation on erosion behavior of HVOF sprayed WC-CoCr coatings, Volume- 258, Issue- 3, 1225 To 1234, DOI- 10.1016/j.apsusc.2011.09.079, EID- 2-s2.0-80455160196
108. Panigrahi S.K., Jayaganthan R., 2011, Effect of ageing on microstructure and mechanical properties of bulk, cryorolled, and room temperature rolled Al 7075 alloy, Volume- 509, Issue- 40, 9609 To 9616, DOI- 10.1016/j.jallcom.2011.07.028, EID- 2-s2.0-80052318421
109. Singh V.P., Sil A., Jayaganthan R., 2011, Tribological behavior of plasma sprayed Cr2O3-3%TiO2 coatings, Volume- 272, Issue- 1, 149 To 158, DOI- 10.1016/j.wear.2011.08.004, EID- 2-s2.0-80052715691
110. Panigrahi S.K., Jayaganthan R., 2011, Effect of annealing on thermal stability, precipitate evolution, and mechanical properties of cryorolled Al 7075 alloy, Volume- 42, Issue- 10, 3208 To 3217, DOI- 10.1007/s11661-011-0723-y, EID- 2-s2.0-80053643832
111. Rahman A., Jayaganthan R., Chandra R., Ambardar R., 2011, Microstructural characterization and cyclic hot corrosion behaviour of sputtered Co-Al nanostructured coatings on superalloy, Volume- 76, Issue- 42798, 307 To 330, DOI- 10.1007/s11085-011-9257-3, EID- 2-s2.0-80052711190
112. Das P., Jayaganthan R., Chowdhury T., Singh I.V., 2011, Fatigue behaviour and crack growth rate of cryorolled Al 7075 alloy, Volume- 528, Issue- 24, 7124 To 7132, DOI- 10.1016/j.msea.2011.05.021, EID- 2-s2.0-79960618925
113. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2011, Structural and optical investigation of sputter deposited hydrophobic chromium oxynitride films, Volume- 519, Issue- 22, 7686 To 7693, DOI- 10.1016/j.tsf.2011.05.056, EID- 2-s2.0-80052135277
114. Rawal S.K., Chawla A.K., Jayaganthan R., Chandra R., 2011, Optical and hydrophobic properties of co-sputtered chromium and titanium oxynitride films, Volume- 257, Issue- 21, 8755 To 8761, DOI- 10.1016/j.apsusc.2011.03.012, EID- 2-s2.0-79960198471
115. Kamal S., Jayaganthan R., Prakash S., 2011, Hot corrosion studies of detonation-gun-sprayed NiCrAlY + 0.4 wt.% CeO 2 coated superalloys in molten salt environment, Volume- 20, Issue- 6, 1068 To 1077, DOI- 10.1007/s11665-010-9728-8, EID- 2-s2.0-80052558524
116. Panigrahi S.K., Jayaganthan R., 2011, Development of ultrafine grained high strength age hardenable Al 7075 alloy by cryorolling, Volume- 32, Issue- 6, 3150 To 3160, DOI- 10.1016/j.matdes.2011.02.051, EID- 2-s2.0-79953164803
117. Mahesh R.A., Jayaganthan R., Prakash S., 2011, High temperature oxidation studies on HVOF sprayed NiCrAl coatings on superalloys, Volume- 27, Issue- 5, 332 To 339, DOI- 10.1179/174329409X409486, EID- 2-s2.0-79960230997
118. Rahman A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2011, Cyclic high temperature oxidation behaviour of sputtered Cr/Al multilayer coatings on superalloy, Volume- 27, Issue- 5, 393 To 401, DOI- 10.1179/026708408X339064, EID- 2-s2.0-79960282791
119. Das P., Jayaganthan R., Chowdhury T., Singh I.V., 2011, Improvement of fracture toughness (K1c) of 7075 Al alloy by cryorolling process, Volume- 683, Issue- , 81 To 94, DOI- 10.4028/www.scientific.net/MSF.683.81, EID- 2-s2.0-79957709057
120. Shah H.N., Jayaganthan R., Pandey A.C., 2011, Nanoindentation study of magnetron-sputtered CrN and CrSiN coatings, Volume- 32, Issue- 5, 2628 To 2634, DOI- 10.1016/j.matdes.2011.01.031, EID- 2-s2.0-79952193444
121. Shah H.N., Jayaganthan R., Kaur D., 2011, Influence of reactive gas and temperature on structural properties of magnetron sputtered CrSiN coatings, Volume- 257, Issue- 13, 5535 To 5543, DOI- 10.1016/j.apsusc.2011.01.030, EID- 2-s2.0-79952535482
122. Panigrahi S.K., Jayaganthan R., 2011, Development of ultrafine-grained Al 6063 alloy by cryorolling with the optimized initial heat treatment conditions, Volume- 32, Issue- 4, 2172 To 2180, DOI- 10.1016/j.matdes.2010.11.027, EID- 2-s2.0-79251604960
123. Jindal R., Jayaganthan R., Singh I.V., Conradt R., 2011, Synthesis and characterization of clinopyroxene based glasses and glass-ceramics along diopside (CaMgSi2O6)-jadeite (NaAlSi2O6) join, Volume- 37, Issue- 3, 741 To 748, DOI- 10.1016/j.ceramint.2010.09.049, EID- 2-s2.0-79951508626
124. Panigrahi S.K., Jayaganthan R., 2011, Influence of solutes and second phase particles on work hardening behavior of Al 6063 alloy processed by cryorolling, Volume- 528, Issue- 42924, 3147 To 3160, DOI- 10.1016/j.msea.2011.01.010, EID- 2-s2.0-79751532880
125. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2011, Study of cyclic hot corrosion of nanostructured Cr/Co-Al coatings on superalloy, Volume- 126, Issue- 42737, 253 To 261, DOI- 10.1016/j.matchemphys.2010.11.030, EID- 2-s2.0-78751633669
126. Das P., Jayaganthan R., Singh I.V., 2011, Tensile and impact-toughness behaviour of cryorolled Al 7075 alloy, Volume- 32, Issue- 3, 1298 To 1305, DOI- 10.1016/j.matdes.2010.09.026, EID- 2-s2.0-78649873608
127. Walia R., Pivin J.C., Chawla A.K., Jayaganthan R., Chandra R., 2011, Structural and magnetic properties of sputter deposited cobalt-silica nanocomposite thin films, Volume- 509, Issue- 6, L103 To L108, DOI- 10.1016/j.jallcom.2010.11.151, EID- 2-s2.0-78651359055
128. Singh V.P., Sil A., Jayaganthan R., 2011, A study on sliding and erosive wear behaviour of atmospheric plasma sprayed conventional and nanostructured alumina coatings, Volume- 32, Issue- 2, 584 To 591, DOI- 10.1016/j.matdes.2010.08.019, EID- 2-s2.0-77958484219
129. Rahman A., Chawla V., Jayaganthan R., Chandra R., Ambardar R., 2010, Evaluation of high temperature oxidation behaviour of nanostructured Cr/Co-Al coatings, Volume- 74, Issue- 42861, 341 To 358, DOI- 10.1007/s11085-010-9217-3, EID- 2-s2.0-78650171976
130. Shah H.N., Jayaganthan R., Kaur D., 2010, Effect of sputtering pressure and temperature on DC magnetron sputtered CrN films, Volume- 26, Issue- 8, 629 To 637, DOI- 10.1179/174329409X389326, EID- 2-s2.0-78149427010
131. Shah H.N., Jayaganthan R., Kaur D., 2010, Synthesis and microstructural characterisation of CrSiN thin films deposited on Si(100) substrate, Volume- 26, Issue- 8, 596 To 601, DOI- 10.1179/026708410X12459349720097, EID- 2-s2.0-78149432158
132. Chawla V., Chandra R., Jayaganthan R., 2010, Effect of phase transformation on structural, electrical and hydrophobic properties of nanocomposite Ti1-xAlxN films, Volume- 507, Issue- 2, L47 To L53, DOI- 10.1016/j.jallcom.2010.08.017, EID- 2-s2.0-77957141360
133. Panigrahi S.K., Jayaganthan R., 2010, Effect of annealing on precipitation, microstructural stability, and mechanical properties of cryorolled Al 6063 alloy, Volume- 45, Issue- 20, 5624 To 5636, DOI- 10.1007/s10853-010-4627-9, EID- 2-s2.0-77956478717
134. Panigrahi S.K., Jayaganthan R., 2010, A study on the combined treatment of cryorolling, short-annealing, and aging for the development of ultrafine-grained Al 6063 alloy with enhanced strength and ductility, Volume- 41, Issue- 10, 2675 To 2690, DOI- 10.1007/s11661-010-0328-x, EID- 2-s2.0-78149282022
135. Chawla V., Jayaganthan R., Chandra R., 2010, Influence of Sputtering Pressure on the Structure and Mechanical Properties of Nanocomposite Ti-Si-N Thin Films, Volume- 26, Issue- 8, 673 To 678, DOI- 10.1016/S1005-0302(10)60105-3, EID- 2-s2.0-77957037470
136. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2010, Structural, optical and hydrophobic properties of sputter deposited zirconium oxynitride films, Volume- 172, Issue- 3, 259 To 266, DOI- 10.1016/j.mseb.2010.05.027, EID- 2-s2.0-77955431071
137. Shah H.N., Jayaganthan R., Kaur D., Chandra R., 2010, Influence of sputtering parameters and nitrogen on the microstructure of chromium nitride thin films deposited on steel substrate by direct-current reactive magnetron sputtering, Volume- 518, Issue- 20, 5762 To 5768, DOI- 10.1016/j.tsf.2010.05.095, EID- 2-s2.0-77955426185
138. Mahesh R.A., Jayaganthan R., Prakash S., 2010, Evaluation of hot corrosion behaviour of HVOF sprayed Ni-5Al and NiCrAl coatings in coal fired boiler environment, Volume- 26, Issue- 6, 413 To 421, DOI- 10.1179/174329409X451164, EID- 2-s2.0-77955679171
139. Chawla V., Jayaganthan R., Chandra R., 2010, Microstructural and mechanical properties of sputter deposited TiN/SiNx multilayer thin films, Volume- 122, Issue- 42769, 424 To 430, DOI- 10.1016/j.matchemphys.2010.03.018, EID- 2-s2.0-77953136299
140. Kamal S., Jayaganthan R., Prakash S., 2010, Hot corrosion behaviour of D-gun sprayed NiCoCrAlYTa coated superalloys at 900°C in molten salt environment, Volume- 26, Issue- 6, 453 To 462, DOI- 10.1179/026708410X12459349720132, EID- 2-s2.0-77955696259
141. Kamal S., Jayaganthan R., Prakash S., 2010, Mechanical and microstructural characteristics of detonation gun sprayed NiCrAlY + 0.4 wt% CeO2 coatings on superalloys, Volume- 122, Issue- 1, 262 To 268, DOI- 10.1016/j.matchemphys.2010.02.046, EID- 2-s2.0-77950517592
142. Panigrahi S.K., Jayaganthan R., Pancholi V., Gupta M., 2010, A DSC study on the precipitation kinetics of cryorolled Al 6063 alloy, Volume- 122, Issue- 1, 188 To 193, DOI- 10.1016/j.matchemphys.2010.02.032, EID- 2-s2.0-77950519550
143. Kamal S., Jayaganthan R., Prakash S., 2010, High temperature cyclic oxidation and hot corrosion behaviours of superalloys at 900°C, Volume- 33, Issue- 3, 299 To 306, DOI- 10.1007/s12034-010-0046-4, EID- 2-s2.0-77957576159
144. Shah H.N., Jayaganthan R., Kaur D., 2010, Influence of silicon content on the microstructure and hardness of CrN coatings deposited by reactive magnetron sputtering, Volume- 121, Issue- 3, 567 To 571, DOI- 10.1016/j.matchemphys.2010.02.024, EID- 2-s2.0-77950298100
145. Jayaganthan R., Brokmeier H.-G., Schwebke B., Panigrahi S.K., 2010, Microstructure and texture evolution in cryorolled Al 7075 alloy, Volume- 496, Issue- 42737, 183 To 188, DOI- 10.1016/j.jallcom.2010.02.111, EID- 2-s2.0-77950864918
146. Rawal S.K., Chawla A.K., Chawla V., Jayaganthan R., Chandra R., 2010, Effect of ambient gas on structural and optical properties of titanium oxynitride films, Volume- 256, Issue- 13, 4129 To 4135, DOI- 10.1016/j.apsusc.2010.01.096, EID- 2-s2.0-77950518080
147. Mahesh R.A., Rao G., Jayaganthan R., Prakash S., 2010, Hot corrosion behaviour of HVOF sprayed NiCrAlY-0·4 wt-%CeO 2 coatings on superalloys in aggressive environment at 900°C, Volume- 45, Issue- 2, 142 To 149, DOI- 10.1179/174327808X303473, EID- 2-s2.0-77952196773
148. Shah H.N., Chawla V., Jayaganthan R., Kaur D., 2010, Microstructural characterizations and hardness evaluation of d.c. reactive magnetron sputtered CrN thin films on stainless steel substrate, Volume- 33, Issue- 2, 103 To 110, DOI- 10.1007/s12034-010-0014-z, EID- 2-s2.0-77953813347
149. Rao P.N., Panigrahi S.K., Jayaganthan R., 2010, Effect of annealing and aging treatment on mechanical properties of ultrafine grained Al 6061 alloy, Volume- 26, Issue- 3, 371 To 374, DOI- 10.1179/174328409X443227, EID- 2-s2.0-77749304181
150. Mahesh R.A., Jayaganthan R., Prakash S., 2010, A study on the oxidation behavior of HVOF sprayed NiCrAlY-0.4 wt.% CeO2 coatings on superalloys at elevated temperature, Volume- 119, Issue- 3, 449 To 457, DOI- 10.1016/j.matchemphys.2009.09.024, EID- 2-s2.0-72049120661
151. Chawla V., Jayaganthan R., Chandra R., 2010, A study of structural and mechanical properties of sputter deposited nanocomposite Ti-Si-N thin films, Volume- 204, Issue- 42988, 1582 To 1589, DOI- 10.1016/j.surfcoat.2009.10.001, EID- 2-s2.0-71049150021
152. Panigrahi S.K., Devanand D., Jayaganthan R., 2010, Effect of ageing on strength and ductility of ultrafine grained Al 6061 alloy, Volume- 633-634, Issue- , 303 To 309, DOI- 10.4028/www.scientific.net/MSF.633-634.303, EID- 2-s2.0-75849144292
153. Panigrahi S.K., Jayaganthan R., Pancholi V., 2009, Effect of plastic deformation conditions on microstructural characteristics and mechanical properties of Al 6063 alloy, Volume- 30, Issue- 6, 1894 To 1901, DOI- 10.1016/j.matdes.2008.09.022, EID- 2-s2.0-63049129231
154. Bhatnagar G., Jayaganthan R., Raman B., 2009, Wavelet analysis of surface morphologies of magnetron sputtered Al-Cu thin films, Volume- 7, Issue- 1, 59 To 74, DOI- 10.1142/S0219691309002775, EID- 2-s2.0-65449177606
155. Kamal S., Jayaganthan R., Prakash S., 2009, Mechanical and microstructural characterisations of nicrcoalyta coatings on superalloys deposited by detonation gun technique, Volume- 25, Issue- 4, 303 To 312, DOI- 10.1179/026708409X364939, EID- 2-s2.0-67149104090
156. Kamal S., Jayaganthan R., Prakash S., 2009, Characterisation of detonation gun sprayed Cr3C 2-25NiCr coatings on Ni and Fe based superalloys, Volume- 25, Issue- 4, 287 To 294, DOI- 10.1179/174329408X298247, EID- 2-s2.0-67149093548
157. Mahesh R.A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2009, High temperature cyclic oxidation behavior of magnetron sputtered Ni-Al thin films on Ni- and Fe-based superalloys, Volume- 114, Issue- 42769, 629 To 635, DOI- 10.1016/j.matchemphys.2008.10.037, EID- 2-s2.0-58849134811
158. Chawla V., Jayaganthan R., Chawla A.K., Chandra R., 2009, Microstructural characterizations of magnetron sputtered Ti films on glass substrate, Volume- 209, Issue- 7, 3444 To 3451, DOI- 10.1016/j.jmatprotec.2008.08.004, EID- 2-s2.0-62949154747
159. Mahesh R.A., Jayaganthan R., Prakash S., 2009, Microstructural characterization and hardness evaluation of HVOF sprayed Ni-5Al coatings on Ni- and Fe-based superalloys, Volume- 209, Issue- 7, 3501 To 3510, DOI- 10.1016/j.jmatprotec.2008.08.009, EID- 2-s2.0-62949114299
160. Chawla V., Jayaganthan R., Chandra R., 2009, Microstructural characteristics and mechanical properties of magnetron sputtered nanocrystalline tin films on glass substrate, Volume- 32, Issue- 2, 117 To 123, DOI- 10.1007/s12034-009-0018-8, EID- 2-s2.0-67049158184
161. Kamal S., Jayaganthan R., Prakash S., 2009, High temperature oxidation studies of detonation-gun-sprayed Cr3C2-NiCr coating on Fe- and Ni-based superalloys in air under cyclic condition at 900 °C, Volume- 472, Issue- 42737, 378 To 389, DOI- 10.1016/j.jallcom.2008.04.087, EID- 2-s2.0-61349183924
162. Rahman A., Jayaganthan R., Prakash S., Chawla V., Chandra R., 2009, High temperature oxidation behavior of nanostructured Ni-Al coatings on superalloy, Volume- 472, Issue- 42737, 478 To 483, DOI- 10.1016/j.jallcom.2008.04.091, EID- 2-s2.0-61349171420
163. Chawla V., Jayaganthan R., Chandra R., 2009, Analysis of thermal stress in magnetron sputtered TiN coating by finite element method, Volume- 114, Issue- 1, 290 To 294, DOI- 10.1016/j.matchemphys.2008.09.023, EID- 2-s2.0-58149456507
164. Panigrahi S.K., Jayaganthan R., 2009, Development of ultrafine grained Al-Mg-Si alloy with enhanced strength and ductility, Volume- 470, Issue- 42737, 285 To 288, DOI- 10.1016/j.jallcom.2008.02.028, EID- 2-s2.0-59249094537
165. Mahesh R.A., Jayaganthan R., Prakash S., 2009, Microstructural characteristics and mechanical properties of HVOF sprayed NiCrAl coating on superalloys, Volume- 468, Issue- 42737, 392 To 405, DOI- 10.1016/j.jallcom.2008.01.025, EID- 2-s2.0-58049192849
166. Kamal S., Jayaganthan R., Prakash S., 2009, Evaluation of cyclic hot corrosion behaviour of detonation gun sprayed Cr3C2-25%NiCr coatings on nickel- and iron-based superalloys, Volume- 203, Issue- 8, 1004 To 1013, DOI- 10.1016/j.surfcoat.2008.09.031, EID- 2-s2.0-57549097827
167. Chawla V., Jayaganthan R., Chawla A.K., Chandra R., 2008, Morphological study of magnetron sputtered Ti thin films on silicon substrate, Volume- 111, Issue- 42769, 414 To 418, DOI- 10.1016/j.matchemphys.2008.04.048, EID- 2-s2.0-47949133686
168. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Evaluation of hot corrosion behaviour of HVOF sprayed NiCrAl coating on superalloys at 900 °C, Volume- 111, Issue- 42769, 524 To 533, DOI- 10.1016/j.matchemphys.2008.05.006, EID- 2-s2.0-47949100368
169. Panigrahi S.K., Jayaganthan R., 2008, Effect of rolling temperature on microstructure and mechanical properties of 6063 Al alloy, Volume- 492, Issue- 42737, 300 To 305, DOI- 10.1016/j.msea.2008.03.029, EID- 2-s2.0-47249093751
170. Kamal S., Jayaganthan R., Prakash S., Kumar S., 2008, Hot corrosion behavior of detonation gun sprayed Cr3C2-NiCr coatings on Ni and Fe-based superalloys in Na2SO4-60% V2O5 environment at 900 °C, Volume- 463, Issue- 42737, 358 To 372, DOI- 10.1016/j.jallcom.2007.09.019, EID- 2-s2.0-48949118678
171. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Characterisation of HVOF sprayed NiCrAlY-0-4 wt-%CeO2 coatings on superalloys, Volume- 24, Issue- 5, 366 To 373, DOI- 10.1179/174329408X326362, EID- 2-s2.0-51749092819
172. Chawla V., Jayaganthan R., Chandra R., 2008, Structural characterizations of magnetron sputtered nanocrystalline TiN thin films, Volume- 59, Issue- 8, 1015 To 1020, DOI- 10.1016/j.matchar.2007.08.017, EID- 2-s2.0-44649202788
173. Mahesh R.A., Jayaganthan R., Prakash S., 2008, A study on hot corrosion behaviour of Ni-5Al coatings on Ni- and Fe-based superalloys in an aggressive environment at 900 °C, Volume- 460, Issue- 42737, 220 To 231, DOI- 10.1016/j.jallcom.2007.05.092, EID- 2-s2.0-44449163339
174. Panigrahi S.K., Jayaganthan R., Chawla V., 2008, Effect of cryorolling on microstructure of Al-Mg-Si alloy, Volume- 62, Issue- 17-18, 2626 To 2629, DOI- 10.1016/j.matlet.2008.01.003, EID- 2-s2.0-43049152795
175. Choudhury S., Jayaganthan R., 2008, Monte Carlo simulation of grain growth in 2D and 3D bicrystals with mobile and immobile impurities, Volume- 109, Issue- 42769, 325 To 333, DOI- 10.1016/j.matchemphys.2007.11.037, EID- 2-s2.0-41249091993
176. Panigrahi S.K., Jayaganthan R., 2008, A study on the mechanical properties of cryorolled Al-Mg-Si alloy, Volume- 480, Issue- 42737, 299 To 305, DOI- 10.1016/j.msea.2007.07.024, EID- 2-s2.0-41149146708
177. Chawla V., Jayaganthan R., Chandra R., 2008, Finite element analysis of thermal stress in magnetron sputtered Ti coating, Volume- 200, Issue- 42738, 205 To 211, DOI- 10.1016/j.jmatprotec.2007.09.036, EID- 2-s2.0-39849103434
178. Panigrahi S.K., Devanand D., Jayaganthan R., 2008, A comparative study on mechanical properties of ultrafine-grained Al 6061 and Al 6063 alloys processed by cryorolling, Volume- 61, Issue- 42769, 159 To 163, DOI- , EID- 2-s2.0-58049112196
179. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Oxidation behavior of HVOF sprayed Ni-5Al coatings deposited on Ni- and Fe-based superalloys under cyclic condition, Volume- 475, Issue- 42737, 327 To 335, DOI- 10.1016/j.msea.2007.04.108, EID- 2-s2.0-38749089070
180. Mahesh R.A., Jayaganthan R., Prakash S., 2008, Oxidation behaviour of selected Ni- And Fe- based superalloys in air at 900°C under cyclic conditions, Volume- 61, Issue- 1, 45 To 49, DOI- , EID- 2-s2.0-49649101113
181. Jayaganthan R., Panigrahi S.K., 2008, Effect of cryorolling strain on precipitation kinetics of Al 7075 alloy, Volume- 584-586 PART 2, Issue- , 911 To 916, DOI- , EID- 2-s2.0-56349106564
182. Panigrahi S.K., Jayaganthan R., 2008, A comparative study on mechanical properties of Al 7075 alloy processed by rolling at cryogenic temperature and room temperature, Volume- 584-586 PART 2, Issue- , 734 To 740, DOI- , EID- 2-s2.0-56349128378
183. Anuwar M., Jayaganthan R., Tewari V.K., Arivazhagan N., 2007, A study on the hot corrosion behavior of Ti-6Al-4V alloy, Volume- 61, Issue- 7, 1483 To 1488, DOI- 10.1016/j.matlet.2006.07.058, EID- 2-s2.0-33847065902
184. Kumar A., Jayaganthan R., Chandra R., Chawla V., Tay A.A.O., 2006, Nanoindentation study of sputtered Al-Cu thin films for interconnect applications, Volume- , Issue- , 560 To 564, DOI- 10.1109/EPTC.2006.342774, EID- 2-s2.0-50249139173
185. Sindhu T.K., Chakravarthi S.R., Jayaganthan R., Sarathi R., 2006, Studies on generation and characterization of nano aluminium nitride using wire explosion technique, Volume- 36, Issue- 1, 53 To 58, DOI- 10.1080/15533170500471714, EID- 2-s2.0-33645309602
186. Jayaganthan R., Mohankumar K., Sekhar V.N., Tay A.A.O., Kripesh V., 2006, Fractal analysis of intermetallic compounds in Sn-Ag, Sn-Ag-Bi, and Sn-Ag-Cu diffusion couples, Volume- 60, Issue- 8, 1089 To 1094, DOI- 10.1016/j.matlet.2005.10.090, EID- 2-s2.0-30644480342
187. Huang C.M., Joanne C.L., Patnaik B.S.V., Jayaganthan R., 2006, Monte Carlo simulation of grain growth in polycrystalline materials, Volume- 252, Issue- 11, 3997 To 4002, DOI- 10.1016/j.apsusc.2005.09.051, EID- 2-s2.0-33645222272
188. Jayabalan J., Jayaganthan R., Tay A.A.O., Leong O.B., 2005, Energetics of copper nanowires, Volume- 4, Issue- 4, 717 To 723, DOI- 10.1142/S0219581X05003231, EID- 2-s2.0-28844476222
189. Mohankumar K., Shyong S.K., Jayaganthan R., Tay A.A.O., Kripesh V., 2005, A study on microstructural and mechanical properties of nanocrystalline nickel, Volume- 4, Issue- 4, 615 To 622, DOI- 10.1142/S0219581X05003358, EID- 2-s2.0-28844431581
190. Jayaganthan R., Mohankumar K., Tay A.A.O., 2005, Nanoindentation study of nanocrystalline nickel, Volume- 4, Issue- 2, 197 To 205, DOI- 10.1142/S0219581X05003048, EID- 2-s2.0-21144436080
191. Jayaganthan R., Vora R.H., 2005, Experimental investigation and Monte Carlo Simulation of glass transition in polymer nanocomposites, Volume- 23, Issue- , 339 To 342, DOI- , EID- 2-s2.0-12344336229
192. Jayaganthan R., Chow G.M., 2005, Thermodynamic modeling of surface segregation in Au-Ti nanoparticles, Volume- 23, Issue- , 259 To 262, DOI- , EID- 2-s2.0-12344324508
193. Jayaganthan R., Chow G.M., 2005, Monte Carlo simulation of surface segregation in nanoparticles, Volume- 23, Issue- , 203 To 206, DOI- , EID- 2-s2.0-12344280894
194. Vora R.H., Jayaganthan R., Wang Z., Thin E.T., Bang T.K., 2005, Synthesis, fabrication, characterization, properties and thermo-oxldatlve stability study of poly(ether imlde)/MMT clay nanocomposites, Volume- 23, Issue- , 379 To 382, DOI- , EID- 2-s2.0-12344251595
195. Jayaganthan R., Mohankumar K., Tay A.A.O., Kripesh V., 2004, Fractal analysis of Sn-Ag, Sn-Ag-Cu, Sn-Ag-Bi interfacial morphology in flipchip packaging applications, Volume- , Issue- , 620 To 624, DOI- , EID- 2-s2.0-28444473508
196. Sekhar V.N., Srinivasarao V., Jayaganthan R., Mohankumar K., Tay A.A.O., 2004, A study on the mechanical behavior of the sputtered nickel thin Films for UBM applications, Volume- , Issue- , 610 To 614, DOI- , EID- 2-s2.0-28444491481
197. Srinivasarao V., Jayaganthan R., Sekhar V.N., Mohankumar K., Tay A.A.O., Kripesh V., 2004, Nanoindentation study of the sputtered Cu thin films for interconnect applications, Volume- , Issue- , 343 To 347, DOI- , EID- 2-s2.0-28444435224
198. Sarathi R., AnilKumar C.R., Venkataseshaiah C., Jayaganthan R., 2004, Influence of homo- and heterocharges on the growth dynamics of electrical trees, Volume- 58, Issue- 19, 2386 To 2392, DOI- 10.1016/j.matlet.2004.02.013, EID- 2-s2.0-2942516523
199. Jayaganthan R., Chow G.M., 2002, Thermodynamics of surface compositional segregation in Ni-Co nanoparticles, Volume- 95, Issue- 2, 116 To 123, DOI- 10.1016/S0921-5107(02)00221-0, EID- 2-s2.0-0036683015
200. Piriyakumar A.L., Levi P., Jayaganthan R., Sarathi R., 2000, A parallel processing technique for electrical tree growth in solid insulating materials using cellular automata, Volume- , Issue- , 228 To 231, DOI- 10.1109/PCEE.2000.873634, EID- 2-s2.0-84951740704
201. Jayaganthan R., Hajra J.P., 1998, Thermodynamics and phase equilibria in the Al-In-Sb system, Volume- 29, Issue- 2, 611 To 616, DOI- , EID- 2-s2.0-0032000546
202. Jayaganthan R., Hajra J.P., 1998, Activities of Al in the Al-Ga-In-Sb system in the temperature range of 1073-1273K, Volume- 39, Issue- 1, 1 To 5, DOI- 10.1016/S1359-6462(98)00136-5, EID- 2-s2.0-0032485959
203. Jayaganthan R., Hajra J.P., 1997, Applicability of a dilute quaternary model in interpreting the thermodynamic properties of the Fe-Ni-Ta-N system, Volume- 37, Issue- 10, 1539 To 1544, DOI- 10.1016/S1359-6462(97)00286-8, EID- 2-s2.0-0031277310
204. Hajra J.P., Jayaganthan R., Divakar M., 1997, Representation of thermodynamic properties of quaternary systems using interaction parameters, Volume- 68, Issue- 9, 375 To 382, DOI- 10.1002/srin.199700569, EID- 2-s2.0-0031220342
205. Jayaganthan R., Hajra J.P., 1996, Thermodynamics and phase equilibria in the Al-Ga system, Volume- 38, Issue- 42737, 96 To 102, DOI- , EID- 2-s2.0-0030103128