|
Sl. No.
|
Authors
|
Title
|
Name of Journal
|
Page
|
Vol
|
Year
|
|
88
|
T. Du, M. Pan, B. Li, S. Zhu, Z. Wei, G. Wu, Suhrit Mula, P.C. Kang
|
Tribological behavior of TiN-coated titanium fiber reinforced 5056-aluminum matrix composites
|
Materials Characterization
|
115992
|
232
|
Feb 2026
|
|
87
|
Gopal Ji Rai, Suhrit Mula, Gautam Agarwal
|
Investigating metallurgical integrity and temperature-dependent mechanical performance of multi-pass dissimilar welds between a cast nickel-based 625 superalloy and 304H stainless steel
|
International Journal of Pressure Vessels and Piping,
Part A
|
105670
|
219
|
Feb 2026
|
|
86
|
Apurba Mahato, Pravendra Pratap Singh, Govind Bajargan, Suhrit Mula
|
Hot deformation behavior of a cast dual-phase CoCrFeNiAl0. 7 high-entropy alloy: validation of processing maps and microstructural characteristics
|
Journal of Alloys and Compounds
|
185583
|
1050
|
Jan 2026
|
|
85
|
Arpan Arora, Argha Dutta, N Gayathri, Paramita Mukherjee, Suhrit Mula
|
Proton irradiation-induced evolution in microstructure, crystallinity, and mechanical behavior of ODS steel
|
Journal of Materials Research and Technology
|
3456-3461
|
39
|
Nov.-Dec.
2025
|
|
84
|
P. P. Singh, S. Mula
|
High-cycle fatigue behaviour and damage evaluation in a Nb-V stabilized low-carbon martensitic steel
|
Metallurgical and Materials Transactions A
|
4361–4376
|
56
|
Oct, 2025
|
|
83
|
P. P. Singh, M. Kumar, S. Mula
|
Synergistic effects of hot rolling and heat treatments on microstructural characteristics and achieving ultra-high strength in a V-Nb microalloyed steel
|
Metallurgical and Materials Transactions A
|
4524–4542
|
56
|
Oct, 2025
|
|
82
|
S. Chahar, S. Mula
|
Influence of Pre-straining on Phase Transformation Kinetics in a Cast Homogenized Superni 625 During Thermal Exposure
|
Metallurgical and Materials Transactions A
|
3730–3747
|
56
|
Sep, 2025
|
|
81
|
Ashwin Kumar Godasu, Sonika Chahar, Atul Kumar, Ujjwal Prakash, Suhrit Mula
|
Dislocation Substructure Evolution and Damage Accumulation in Large-Grained Homogenized and Fine-Grained Hot-Rolled Superni 625 During LCF at 298 K and 973 K
|
Metallurgical and Materials Transactions A
|
2834–2852
|
56
|
Aug, 2025
|
|
80
|
A. Dutta, A. Sarkar, N. Gayathri, S. Bysakh, A. Arora, S. Dey, S. Srivastava, S. Mula, P. Mukherjee
|
Effects of Cold Rolling–Induced Defects on Proton Irradiation Response in Nb-1Zr-0.1 C Alloy
|
Nuclear Science and Engineering
|
1162-1180
|
199
|
July,
2025
|
|
79
|
Arpan Arora, Ankur Kumar, Argha Dutta, N Gayathri, Paramita Mukherjee, Suhrit Mula
|
Degradation of Fe-Ni based ODS alloys in extreme environmental conditions
|
Materials Today Communications
|
112501
|
46
|
June 2025
|
|
78
|
Gaurav Rajan, Atul Kumar, Suhrit Mula
|
Influence of friction stir processing on wear behavior of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting
|
Journal of Manufacturing Processes
|
1631-1649
|
141
|
May 2025
|
|
77
|
Arpan Arora, Suhrit Mula
|
Effects of Zr, Al, and Al+Zr Addition on Phase Evolution Characteristics and Strengthening Mechanisms of Fe-42Ni-2Y 2O3 Oxide Dispersion Strengthening Steels Developed by Mechanical Alloying and Spark Plasma Sintering
|
Adv. Eng. Mater.
|
2400370(1-14)
|
27
|
March, 2025
|
|
76
|
Sonika Chahar, Suhrit Mula
|
Tensile deformation characteristic and SASH modeling of Superni 625 alloy: Synergistic effects of grain size, ageing time, and deformation micromechanisms
|
Journal of Alloys and Compounds
|
179113
|
1017
|
Feb, 2025
|
|
75
|
Pravendra Pratap Singh, V Anil Kumar, Suhrit Mula, Indra Vir Singh, GS Vinod Kumar
|
Flow stress modeling and microstructural evolution during hot compression of Al-4.8Mg-0.3Sc alloy produced by laser powder bed fusion
|
Journal of Alloys and Compounds
|
178011
|
1010
|
Jan, 2025
|
|
74
|
A. Mahato, S. Chahar, R. Singh, G. Bajargan, S. Mula
|
Compositional engineering of CoCrCuFeNiAlx high entropy alloys to achieve superior yield strength-ductility synergy
|
Materials Science and Engineering: A
|
147235
|
915
|
Nov.
2024
|
|
73
|
P.P. Singh, S. Mula, S. Ghosh
|
Grain refinement, strain hardening and fracture in thermomechanically processed ultra-strong microalloyed steel
|
Materials Today Communications
|
107582
|
38
|
2024
|
|
72
|
A.K. Godasu, S. Mishra, U. Prakash, A. Haldar, S. Mula
|
Complementary shear banding during warm rolling of alloy 625 leads to uncharacteristic development of γ-fiber texture
|
Metallurgical and Materials Transactions A
|
652-673
|
55
|
2024
|
|
71
|
S. Chahar, A.K. Godasu, A. Haldar, S. Mula
|
Phase transformation kinetics in a homogenized cast alloy 625 and its impact on deformation micromechanisms
|
Philosophical Magazine
|
1-27
|
104
|
2024
|
|
70
|
A. Arora, A. Dutta, N. Gayathri, S. Mula
|
Proton irradiation, tribological and corrosion characteristics of Fe-Ni based ODS alloys
|
Materials Today Communications
|
107563
|
37
|
2023
|
|
69
|
P.P. Singh, S. Ghosh, S. Mula
|
Dry-sliding wear behaviour of a novel low-carbon martensitic structure steel alloyed with Nb and V
|
|
108959
|
189
|
2023
|
|
68
|
G. Rajan, S. Mula
|
Synergetic effects of cryo-FSP on microstructural, mechanical and corrosion behavior of stir cast AA5083-2wt.% SiC nanocomposite
|
Journal of Manufacturing Processes
|
19-34
|
106
|
2023
|
|
67
|
A. Arora, B. Pratap, S. Mula
|
Effect of sintering temperature and aluminium addition on thermal stability, micrographic features, and mechanical properties of Fe-Ni based ODS alloys
|
Journal of Alloys and Compounds
|
170336
|
956
|
2023
|
|
66
|
G. Rajan, A. Kumar, A.K. Godasu, S. Mula
|
Effect of friction stir processing on microstructural evolution and mechanical properties of nanosized SiC reinforced AA5083 nanocomposites developed by stir casting
|
Materials Today Communications
|
105912
|
35
|
June 2023
|
|
65
|
P.P. Singh, S. Ghosh, S. Mula
|
Strengthening behaviour and failure analysis of hot-rolled Nb+V microalloyed steel processed at various coiling temperatures
|
Materials Science and Engineering: A
|
144210
|
859
|
Oct, 2022
|
|
64
|
A. Arora, S. Mula
|
Phase evolution characteristics, thermal stability, and strengthening processes of Fe–Ni based ODS invar steel produced by mechanical alloying and spark plasma sintering
|
Materials Science and Engineering: A
|
143972
|
856
|
Oct, 2022
|
|
63
|
P.P. Singh, S. Mula, A. Malakar, S. Ghosh
|
Strain-rate dependent workability and plastic flow instability of a (Nb+ V) stabilized microalloyed steel
|
Materials Today Communications
|
103519
|
31
|
Jun, 2022
|
|
62
|
A.K. Godasu, S. Mishra, U. Prakash, S. Mula
|
Tensile deformation modeling of a homogenized cast alloy 625: Effects of large grain size
|
Metallurgical and Materials Transactions A
|
2239-2258
|
53 (6),
|
Apr, 2022
|
|
61
|
A. Arora, S. Mula
|
Effect of Ti addition on thermal stability and phase evolution of super-invar based yttria added ODS alloys developed by mechanical alloying and spark plasma sintering
|
Journal of Alloys and Compounds
|
163336
|
899
|
Apr,2022
|
|
60
|
PP Singh, S Ghosh, S. Mula
|
Flow stress modeling and microstructural characteristics of a low carbon Nb-V microalloyed steel
|
Materials Today Communications
|
103156
|
30
|
Mar, 2022
|
|
59
|
S. Ghosh, S. Mula, A. Malakar, M. Somani, J. Kömi
|
High cycle fatigue performance, crack growth and failure mechanisms of an ultrafine-grained Nb+Ti stabilized, low-C microalloyed steel processed by multiphase controlled rolling and forging
|
Materials Science and Engineering: A
|
141883
|
825
|
Sep, 2021
|
|
58
|
H. Liu, P.C. Kang, G. Wu, Z. Wang, N. Zhang, S. Mula
|
Ablation mechanism of AlSi/graphite dissipative heat protective composites under an oxy-acetylene torch
|
Ceramics International
|
27925-27933
|
47
|
Oct., 2021
|
|
57
|
V.M.S. Muthaiah, C.C. Koch, S. Mula
|
Thermal stability and mechanical properties of Fe-Cr-Zr alloys developed by mechanical alloying followed by spark plasma sintering
|
Journal of Alloys and Compounds
|
158266
|
856
|
2021
|
|
56
|
A. Arora, A. Kumar, S. Mula
|
Effect of Y2O3 on mechanical and corrosion properties of Fe and Fe-Ni alloys prepared by mechanical alloying followed by spark plasma sintering
|
Journal of Materials Engineering and Performance
|
1387–1397
|
30
|
2021
|
|
55
|
Moses JP, V.M.S. Muthaiah, S. Mula
|
Yttria reinforced Fe-Cr ferritic alloy based nanocomposites for fusion reactor structural applications
|
Metallurgical and Materials Transactions A
|
627–643
|
52
|
2021
|
|
54
|
S. Ghosh, S. Mula, M. Somani, J. Kömi
|
Fracture toughness and fatigue crack growth characteristics of UFG microalloyed and IF steels processed by critical phase control multiaxial forging
|
Materials Science Forum
|
481-486
|
1016
|
2021
|
|
53
|
A. Kumar, K. Pal, S. Mula
|
Effects of cryo-FSP on metallurgical and mechanical properties of stir cast Al7075–SiC nanocomposites
|
Journal of Alloys and Compounds
|
156925
|
852
|
2021
|
|
52
|
S. Ghosh, M.C. Somani, D. Setman,
S. Mula
|
Hot Deformation Characteristic and Strain Dependent Constitutive Flow Stress Modelling of Ti + Nb Stabilized Interstitial Free Steel
|
Metals and Materials International
|
2481–2498
|
27
|
2021
|
|
51
|
A.K. Godasu, U. Prakash, S. Mula
|
Flow stress characteristics and microstructural evolution of cast superalloy 625 during hot deformation
|
Journal of Alloys and Compounds
|
156200
|
844
|
Dec., 2020
|
|
50
|
S. Ghosh, M.C. Somani, D. Setman, S. Mula
|
Elucidation of deformation mechanisms and construction of processing maps for a Ti+Nb stabilized IF steel
|
Materials Science and Engineering: A
|
139648
|
790
|
July, 2020
|
|
49
|
PC. Kang, H. Liu, W. Yang, W. Wang, N. Zhang, Q. Zhao, S. Mula, G. Wu
|
Microstructure and ablation behavior of SiMo/graphite composites with excellent short-time ablation resistance
|
Corrosion Science
|
108590
|
168
|
2020
|
|
48
|
S. Ghosh,
S. Mula
|
Improvement of fracture toughness of Ti+Nb stabilized microalloyed and interstitial free steels processed through single phase regime control multiaxial forging
|
Materials Science and Engineering: A
|
138817
|
772
|
2020
|
|
47
|
A. K. Godasu, A. Kumar, S. Mula
|
Influence of cryocooling on friction stir processing of Al-5083 alloy
|
Materials & Manufacturing Processes
|
202-213
|
35
|
2020
|
|
46
|
S. Ghosh, Jukka Kömi, S. Mula
|
Flow stress characteristics and design of innovative 3-steps multiphase control thermomechanical processing to produce ultrafine grained bulk steels
|
Materials & Design,
|
108297
|
186
|
2020
|
|
45
|
S. Ghosh, S. Mula
|
Fracture toughness characteristics of ultrafine grained Nb-Ti stabilized microalloyed and interstitial free steels processed by advanced multiphase control rolling
|
Materials Characterization
|
110003
|
159
|
2020
|
|
44
|
V.M.S. Muthaiah,
S. Mula
|
Evolution of microstructures and mechanical properties of spark plasma sintered Fe-Cr-Nb alloys
|
Materials Science and Engineering: A
|
367-376
|
739
|
2019
|
|
43
|
A. Kumar, A. K. Godasu, K. Pal, S. Mula
|
Effects of in-process cryocooling on metallurgical and mechanical properties of friction stir processed Al7075 alloy
|
Materials Characterization
|
440-447
|
144
|
2018
|
|
42
|
V.M.S. Muthaiah, C.C. Koch, S. Mula
|
Effect of Nb addition on Fe-7Cr-Nb and Fe-15Cr-Nb metastable alloy formation and their thermal stability
|
Mater. Res. Express
|
056534
|
5
|
2018
|
|
41
|
S. Ghosh, SM Dasharath, S. Mula
|
Simulation kinetics of austenitic Phase transformation in Ti+Nb stabilized IF and microalloyed steels
|
Journal of Materials Engineering & Performance
|
2595–2608
|
27
|
2018
|
|
40
|
V.M.S. Muthaiah, S. Mula.
|
Influence of Cr and Y addition on microstructure, mechanical properties and corrosion resistance of SPSed Fe-based alloys
|
Metallurgical and Materials Transactions A
|
990–1005
|
49
|
2018
|
|
39
|
A. Kumar, K. Pal, S. Mula
|
Simultaneous improvement of mechanical strength, ductility and corrosion resistance of stir cast Al7075-2%SiC micro- and nanocomposites by friction stir processing
|
Journal of Manufacturing Processes
|
1-13
|
30
|
Dec,
2017
|
|
38
|
A. Prem Kumar, V.M.S. Muthaiah, S. Mula
|
Effect of Nb, Y and Zr on thermal stability of nanocrystalline Al-4.5wt.% Cu alloy prepared by mechanical alloying
|
Journal of Alloys and Compounds
|
617-627
|
722
|
Oct,
2017
|
|
37
|
S. Ghosh, S. Mula, D.K. Mondal
|
Development of ultrahigh strength cast-grade microalloyed steel by simple innovative heat treatment techniques for industrial applications
|
Materials Science and Engineering: A
|
667-680
|
700
|
July,
2017
|
|
36
|
Debasis Nayak, Shiba Narayan Sahu, S. Mula
|
Metallurgical approach towards explaining optimized EDM process parameters for better surface integrity of AISI D2 tool steel
|
Transactions of the Indian Institute of Metals
|
1183-1191
|
70
|
July 2017
|
|
35
|
SM Dasharath, S. Ghosh, S. Mula
|
Effect of SFE on tensile and fatigue behavior of ultrafine grained Cu-Zn and Cu-Al alloys developed by cryo-rolling/forging
|
Materials Science and Engineering: A
|
73-83
|
693
|
May,2017
|
|
34
|
SM Dasharath, S. Mula
|
Improvement of mechanical properties and fracture toughness of low SFE Cu-Al alloy through microstructural modification by multiaxial cryoforging
|
Materials Science and Engineering: A
|
393-404
|
690
|
2017
|
|
33
|
A. Kumar, S.K. Sharma, K. Pal, S. Mula
|
Effect of Process Parameters on Microstructural Evolution, Mechanical Properties and Corrosion Behavior of Friction Stir Processed Al 7075 Alloy
|
Journal of Materials Engineering and Performance
|
1122–1134
|
26
|
2017
|
|
32
|
S. Ghosh, A.K. Singh, S. Mula, P. Chanda, V.V. Mahashabde, T.K. Roy
|
Mechanical properties, formability and corrosion resistance of thermomechanically controlled processed Ti-Nb stabilized IF steel
|
Materials Science and Engineering: A
|
22–36
|
684
|
2017
|
|
31
|
SM Dasharath, S. Mula
|
Mechanical properties and fracture mechanisms of ultrafine grained Cu-9.6% Zn alloy processed by multiaxial cryoforging
|
Materials Science and Engineering: A
|
403-414
|
675
|
2016
|
|
30
|
Sooraj S, V.M. Suntharavel Muthaiah, P.C. Kang, C.C. Koch, S. Mula
|
Microstructural evolution and thermal stability of Fe-Zr metastable alloys developed by mechanical alloying followed by annealing
|
Philosophical Magazine
|
2649-2670
|
96
|
2016
|
|
29
|
V.M.S. Muthaiah, S. Mula
|
Effect of zirconium on thermal stability of nanocrystalline aluminium alloy prepared by mechanical alloying
|
Journal of Alloys and Compounds
|
571-580
|
688
|
2016
|
|
28
|
Sumit Ghosh, Ajay Kumar Singh, S. Mula
|
Effect of critical temperatures on microstructures and mechanical properties of Nb–Ti stabilized IF steel processed by multiaxial forging
|
Materials & Design
|
47-57
|
100
|
2016
|
|
27
|
SM Dasharath,
S. Mula
|
Microstructural evolution and mechanical properties of low SFE Cu-Al alloys processed by cryorolling followed by short-annealing
|
Materials & Design
|
552-564
|
99
|
2016
|
|
26
|
V.M.S. Muthaiah, Hari Babu L, Carl C Koch, S. Mula
|
Feasibility of formation of nanocrystalline Fe-Cr-Y alloys: Mechanical properties and thermal stability
|
Materials Characterization
|
43-53
|
114
|
2016
|
|
25
|
A.K. Singh, S. Ghosh, S. Mula
|
Simultaneous improvement of strength, ductility and corrosion resistance of Al2024 alloy processed by cryoforging followed by ageing
|
Materials Science and Engineering: A
|
774-785
|
651
|
2016
|
|
24
|
SM Dasharath, C.C. Koch, S. Mula
|
Effect of stacking fault energy on mechanical properties and strengthening mechanisms of brasses processed by cryorolling
|
Materials Characterization
|
14-24
|
110
|
2015
|
|
23
|
S. Ghosh, S. Mula
|
Thermomechanical processing of low carbon Nb–Ti stabilized microalloyed steel: Microstructure and mechanical properties
|
Materials Science and Engineering: A
|
218-233
|
646
|
2015
|
|
22
|
S. Mula, Daria Setman, K.M. Youssef, R.O. Scattergood, CC Koch
|
Structural evolution of Cu(1−X)YX alloys prepared by mechanical alloying: Their thermal stability and mechanical properties
|
Journal of Alloys and Compounds
|
108-116
|
627
|
2015
|
|
21
|
Ravi Kumar, S.M. Dasharath, P.C. Kang, C.C. Koch, S. Mula
|
Enhancement of mechanical properties of low stacking fault energy brass processed by cryorolling followed by short-annealing
|
Materials & Design
|
637-643
|
67
|
2015
|
|
20
|
Bingqing Li, Pengchao Kang, Huasong Gou, Gaohui Wu, S. Mula
|
Surface morphology evolution and ablation mechanism of SiC-Si multiphase ceramic coating on graphite under oxy-acetylene flame
|
Corrosion Science
|
473-480
|
88
|
2014
|
|
19
|
Kang Pengchao, Zhang Bin, Wu Gaohui, Gou Huasong,Chen Guoqin, Jiang Longtao, S. Mula
|
Synthesis of β-SiC Nanowires by ball milled nanoparticles of Si and C
|
Journal of Alloys and Compounds
|
304-308
|
604
|
2014
|
|
18
|
S. Mula, J. Panigrahi, P.C. Kang, Carl C. Koch
|
Effect of microwave sintering over vacuum and conventional sintering of Cu based nanocomposites
|
Journal of Alloys and Compounds
|
710-715
|
588
|
2014
|
|
17
|
Mark A. Atwater, S. Mula, R.O. Scattergood, C.C. Koch
|
Thermal stability of nanocrystalline copper alloyed with antimony
|
Metallurgical and Materials Transactions A
|
5611-5616
|
44
|
2013
|
|
16
|
S. Mula, S.K. Pabi, C.C. Koch, P. Padhi, S. Ghosh
|
Workability and mechanical properties of ultrasonically cast Al-Al2O3 nanocomposites
|
Materials Science and Engineering: A
|
485-491
|
558
|
2012
|
|
15
|
S. Mal, S. Nori, S. Mula, J. Narayan, J. T. Prater
|
Defect mediated reversible ferromagnetism in Co and Mn doped zinc oxide epitaxial films.
|
Journal of Applied Physics
|
|
112
|
2012
|
|
14
|
S. Mula, S. Ghosh, S. K. Pabi
|
Microstructural development and room-temperature thermal stability of mechanically alloyed Al87Y10Ni3 nanostructure
|
Advanced Science Letters
|
362-367
|
16
|
2012
|
|
13
|
S. Mula, H. Bahmanpour, S. Mal, P C Kang, M. Atwater, W. Jian, R.O. Scattergood, C.C. Koch
|
Thermodynamic feasibility of solid solubility extension of Nb in Cu and their thermal stability
|
Materials Science and Engineering: A
|
330-336
|
539
|
2012
|
|
12
|
S. Mula, P. Sahani, S.K. Pratihar, S. Mal, C.C. Koch
|
Mechanical properties and electrical conductivity of Cu–Cr and Cu–Cr–4% SiC nanocomposites for thermo-electric applications
|
Materials Science and Engineering: A
|
4348-4356
|
528
|
2011
|
|
11
|
P. Sahani, S. Mula, P.K. Roy, P.C. Kang, C.C. Koch
|
Structural investigation of vacuum sintered Cu–Cr and Cu–Cr–4% SiC nanocomposites prepared by mechanical alloying
|
Materials Science and Engineering: A
|
7781-7789
|
528
|
2011
|
|
10
|
H. Bahmanpour, A. Kauffmann, M.S. Khoshkhoo, K.M. Youssef, S. Mula, J. Freudenberger, J. Eckert, R.O. Scattergood, C.C. Koch
|
Effect of stacking fault energy on deformation behavior of cryo-rolled copper and copper alloys
|
Materials Science and Engineering: A
|
230-236
|
529
|
2011
|
|
9
|
P.C. Kang, G.Q. Chen, B. Zhang, G.H. Wu, S. Mula, C.C. Koch
|
Oxidation protection of carbon fibers by a reaction sintered nanostructured SiC coating
|
Surface Coatings and Technology
|
305-311
|
206
|
2011
|
|
8
|
S. Mula, K. Mondal, S. Ghosh and S. K. Pabi
|
Structure and mechanical properties of Al-Ni-Ti amorphous powder consolidated by pressure-less, pressure-assisted and spark plasma sintering
|
Materials Science and Engineering: A
|
3757-3763
|
527
|
2010
|
|
7
|
S. Mula, S. Ghosh and S. K. Pabi
|
On the formation of phases by mechanical alloying and their thermal stability in Al-Mn-Ce system
|
Powder Technology
|
176-181
|
191
|
2009
|
|
6
|
S. Mula, P. Padhi, S. C. Panigrahi, S. K. Pabi and S. Ghosh
|
On Structure and Mechanical Properties of Ultrasonically Cast Al-2% Al2O3 Nanocomposite
|
Materials Research Bulletin,
|
1154-1160
|
44
|
2009
|
|
5
|
S. Mula, S. Ghosh, S. K. Pabi
|
Synthesis of Al-based Al-Cr-Co-Ce alloy by mechanical alloying
|
Materials Science and Engineering A
|
208-213
|
472
|
2008
|
|
4
|
P.K. Ray, S. Mula, U.K. Mohanty, B. C. Ray
|
Effect of hygrothermal shock waves on interlaminar shear strength of hybrid composites
|
Journal of Reinforced Plastics and Composites
|
519-524
|
26
|
2007
|
|
3
|
T. Bera, S. Mula, P. K. Ray, B. C. Ray
|
Effects of Thermal Shocks and Thermal Spikes on Hygrothermal Behavior of Glass–Polyester Composites
|
Journal of Reinforced Plastics and Composites
|
725-738
|
26
|
2007
|
|
2
|
S. Mula, T. Bera, P. K. Ray, B. C. Ray
|
Effect of Hydrothermal ageing on mechanical behaviour of sub-zero weathered GFRP composites
|
Journal of Reinforced Plastics and Composites
|
673 -680
|
25
|
2006
|
|
1
|
B.C. Ray, S. Mula, T. Bera, P. K. Ray
|
Prior Thermal Spikes and Thermal Shocks on Mechanical Behavior of Glass Fiber-Epoxy Composites
|
Journal of Reinforced Plastics and Composites
|
197-213
|
25
|
2006
|
